Flexural subsidence by 29 Ma on the NE edge of Tibet from the magnetostratigraphy of Linxia Basin, China

This study provides a detailed magnetostratigraphic record of subsidence in the Linxia Basin, documenting a 27 Myr long sedimentary record from the northeastern edge of the Tibetan Plateau. Deposition in the Linxia Basin began at 29 Ma and continued nearly uninterruptedly until 1.7 Ma. Increasing rates of subsidence between 29 and 6 Ma in the Linxia Basin suggest deposition in the foredeep portion of a flexural basin and constrain the timing of shortening in the northeastern margin of the plateau to Late Oligocene–Late Miocene time. By Late Miocene–Early Pliocene time, a decrease in subsidence rates in the Linxia Basin associated with thrust faulting and a 10° clockwise rotation in the basin indicates that the deformation front of the Tibetan plateau had propagated into the currently deforming region northeast of the plateau.     

Crustal structure beneath the Songpan—Garze orogenic belt

The Benzilan-Tangke deepseismic sounding profile in the western Sichuan region passes through the Song-pan-Garze orogenic belt with trend of NNE.Based on the travel times and the related amplitudes of phases in the record sections,the 2-D P-wave crustal structure was ascertained in this paper.The velocity structure has quite strong lateral variation along the profile.The crust is divided into 5layers,where the first,second and third layer belong to the upper crust,the forth and fifth layer belong to the lower crust.The low velocity anomaly zone gener-ally exists in the central part of the upper crust on the profile,and it integrates into the overlying low velocity basement in the area to the north of Ma‘erkang.The crustal structure in the section can be divided into 4parts:in the south of Garze-litang fault,between Garze-Litang fault and Xianshuihe fault,between Xianshuihe fault and Longriba fault and in the north of Longriba fault,which are basically coincided with the regional tectonics division.The crustal thickness decreases from southwest to northeast along the profile,that is ,from62km in the region of the Jinshajiang River to 52km in the region of the Yellow River.The Moho discontinuity does not obviously change across the Xianshuihe fault basesd on the PmP phase analysis.The crustal average velocity along the profile is lower,about 6.30 km/s.The Benzilan-Tangke profile reveals that the crust in the study area is orogenic.The Xianshuihe fault belt is located in the central part of the profile,and the velocity is positive anomaly on the upper crust,and negative anomaly on the lower crust and upper mantle.It is considered as a deep tectonhic setting in favor of strong earthquake‘s accumulation and occurrence.     

Characteristics of Tectonic Deformation and Mechanisms for the Active Maxianshan-Xinglongshan Fault System in the Lanzhou Area

A detailed investigation permitted us to obtain quantitative data concerning fine geometric structures of 4 faults of the active Maxianshan-Xinglongshan fault system and the latest movement along them. Of them the northern Maxianshan border fault is a large-scale, strongly active Holocene reverse sinistral strike-slip fault, the other 3 faults, the southern Maxianshan border fault and the southern Xinglongshan border and the northern Xinglongshan border faults are the accompanying active late-Pleistocene thrust faults, which are incorporated into the main strike-slip fault, the northern Maxianshan border fault at depth. It is the most important earthquake-controlling fault in the Lanzhou area, the fault influences and constrains the seismic activity in the area.     

山东惠民凹陷中央隆起带古近系沙河街组层序地层特征及控制因素研究

结合山东惠民凹陷中央隆起带古近系层序地层学研究,依据层序中湖平面变化特点和相应的沉积物特征,提出了构造运动和气候是本区层序地层发育的主要控制因素。中央隆起带古近系沙河街组二、三、四亚段可划分为 3种层序类型,即断陷初期型、强断陷期型和断陷后期型层序。由于构造运动导致湖岸线向盆地方向退缩,产生下降体系域,本次研究采用了体系域的四分法,即一个完整层序由低位、湖侵、高位和下降四个体系域组成,并且层序界面位于湖平面最大下降的位置,介于下降域和低位域之间。断陷初期红色地层层序,受气候因素控制明显,既不同于冲积地层层序,也不同于正常湖相地层层序,在层序演化上有其独特的特点。受构造作用和沉积物补给条件的影响,研究区发育三种沉积密集段,不同类型的沉积密集段在层序中所处位置不同,控制着不同的烃源岩厚度和油气资源储量。     

苏北榴辉岩中水晶的形成时代及其对超高压变质岩折返的示踪意义

江苏东海水晶以其晶体粒大和产量巨大而闻名，在地质上也因其产于高压超高压变质带而独具特色。在对大别—苏鲁超高压变质带的区域成矿作用进行研究和对中国大陆科学钻探工程(CCSD)主孔岩心进行编录的过程中，认识到超高压带存在着超低压成矿现象，包括中国最主要的水晶矿床成矿带在内的许多矿床都可能是在超高压变质之后退变质结束阶段的超低压环境中形成的，对水晶进行流体包裹体的Rb-Sr等时线年代学研究，获得208Ma的等时线年龄，表明成矿时代为印支期。该年代可视为超高压变质带折返并经历了退变质之后而“稳定”下来的时间。     

湖南涟源凹陷构造演化与油气成藏研究

涟源凹陷经历了2个主要构造演化阶段:晚古生代海相碳酸盐岩夹碎屑岩盖层建造和中生代陆相沉积,现今的逆掩冲断构造样式和构造格局基本定型于燕山期。油气藏的形成经历了早、晚两期,早期形成于印支运动主幕,燕山运动主幕遭到破坏,部分经重新分配后形成次生气藏;晚期形成于燕山运动主幕以后,属原生油气藏。涟源凹陷中部褶断带的紧闭背斜是寻找次生气藏的首选区域,而宽缓向斜中的隐伏隆起则是寻找晚期原生油气藏的靶区。     

喜马拉雅造山带中段定结地区拆离断层

定结地区位于喜马拉雅造山带中段,发育大量的低角度伸展拆离断层,这些拆离断层中部分构成了藏南拆离系的主体。它们基本上垂直于造山带走向伸展,各拆离断层特征显著,普遍发育糜棱岩,糜棱岩类型复杂,主要有硅质糜棱岩、长英质糜棱岩、花岗质糜棱岩。在研究区的北部,拆离断层呈环状产出,构成变质核杂岩三层结构中的中间层,规模一般较大;同时拆离断层使变质核杂岩体盖层中的部分地层拆离减薄;在研究区南部拆离断层呈线状延伸很远,总体上平行造山带延伸,构成了藏南拆离系重要组成部分。部分拆离断层同韧性剪切带平行产出,形成拆离剪切的脆韧性体系。     

滇西思茅大平掌矿区火山岩特征及其构造环境

滇西大平掌铜多金属矿床的含矿建造(龙洞河组)主要由细碧岩-角斑岩-石英角斑岩和流纹岩-硅质岩组成,伴有部分火山角砾岩、凝灰岩,属双峰式火山岩组合。火山岩具明显的Na2O>K2O和Nb、Ta、Zr、Hf、Ti亏损。岩石化学和微量元素判别标志指示含矿建造形成于岛弧裂陷环境。结合区域构造古地理资料分析,它是滇西南古特提斯洋壳在晚石炭世-早二叠世由西向东俯冲过程中岩浆作用的结果。     

吐哈盆地中央构造带正反转演化特征

吐哈盆地中央构造带由火焰山构造和七克台构造组成。中央构造带形成于三叠纪晚期至侏罗纪早期,表现为伸展构造特征,生长断层上盘地层厚度明显大于下盘,并于断层上盘所在的台北凹陷形成沉降中心。晚侏罗世,由于拉萨陆块与欧亚大陆的碰撞作用导致吐哈盆地由伸展盆地转变为挤压盆地,中央构造带也于此时发生构造反转,由早期的伸展正断层转变为挤压逆断层。发生于55Ma的喜山构造事件对天山地区产生了深刻的影响,但影响时间略有滞后,大致发生在晚渐新世至早中新世,中央构造带即在此次构造事件中强烈变形,逆冲出露于地表。     

岳西菖蒲地区超高压变质带内的构造地层序列与叠加褶皱型式

以大别造山带南部菖蒲地区为解剖区,结合区域地质调查分析,建立了包括浅变质岩层、超高压变质岩片在内的构造地层序列—岩片组合。对其组成特征、界面性质、形成时代、变形序列等,进行了较系统阐明,并对叠加褶皱型式及形成机制进行了讨论。