The double solid reactant method: II. An application to the shallow groundwaters of the Porto Plain,Vulcano Island (Italy)

This paper presents an example of application of the double solid reactant method (DSRM) of Accornero and Marini (Environmental Geology, 2007a), an effective way for modeling the fate of several dissolved trace elements during water–rock interaction. The EQ3/6 software package was used for simulating the irreversible water–rock mass transfer accompanying the generation of the groundwaters of the Porto Plain shallow aquifer, starting from a degassed diluted crateric steam condensate. Reaction path modeling was performed in reaction progress mode and under closed-system conditions. The simulations assumed: (1) bulk dissolution (i.e., without any constraint on the kinetics of dissolution/precipitation reactions) of a single solid phase, a leucite-latitic glass, and (2) precipitation of amorphous silica, barite, alunite, jarosite, anhydrite, kaolinite, a solid mixture of smectites, fluorite, a solid mixture of hydroxides, illite-K, a solid mixture of saponites, a solid mixture of trigonal carbonates and a solid mixture of orthorhombic carbonates. Analytical concentrations of major chemical elements and several trace elements (Cr, Mn, Fe, Ni, Cu, Zn, As, Sr and Ba) in groundwaters were satisfactorily reproduced. In addition to these simulations, similar runs for a rhyolite, a latite and a trachyte permitted to calculate major oxide contents for the authigenic paragenesis which are comparable, to a first approximation, with the corresponding data measured for local altered rocks belonging to the silicic, advanced argillic and intermediate argillic alteration facies. The important role played by both the solid mixture of trigonal carbonates as sequestrator of Mn, Zn, Cu and Ni and the solid mixture of orthorhombic carbonates as scavenger of Sr and Ba is emphasized.

Modeling of water–rock interactions in an aquitard of sandy clay in the coastal area near Beihai,China

Unconsolidated sand, gravel and clay deposits near Beihai and in the Leizhou Peninsula in southern China form an unconfined aquifer, aquitard and a confined aquifer. Water and soil samples were collected from the two aquifers in the coastal Beihai area for the determination of chemical compositions, minerals and soluble ions. Hydrogeochemical modeling of three flow paths through the aquitard are carried out using PHREEQC to determine water–rock interactions along the flow paths. The results indicate that the dissolution of anorthite, fluorite, halite, rhodochrosite and CO₂, and precipitation of potash feldspar and kaolinite may be occurring when groundwater leaks through the aquitard from the unconfined aquifer to the confined aquifer. Cation exchanges between Na and Ca can also happen along the flow paths.     

A new method of estimating the ratio between in situ rock stresses and tectonics based on empirical and probabilistic analyses

This paper describes a new procedure for assessing the ratio between in situ stresses in rock masses by means of K (K = σ_H / σ_v, being σ_H and σ_v principal stress) and tectonics for purposes of engineering geology and rock mechanics. The method combines the use of the logic decision tree and the empirical relationship between the Tectonic Stress Index, TSI, and a series of K in situ values obtained from an extensive database. The decision tree considers geological and geophysical factors affecting stress magnitudes both on the regional and local scale. The TSI index is defined by geological and geomechanical parameters. The method proposed provides an assessment of the magnitude of horizontal stresses of tectonic origin. Results for several regions of Europe are presented and the possible applications of the procedure are discussed.     

被断裂破坏的盖层封闭能力评价方法及其应用

断层对盖层的破坏主要表现为两个方面:一是减小了盖层的连续封盖面积,二是减小了盖层的厚度。盖层被断层破坏的主要影响因素有断层的断距、倾角和盖层厚度。通过对影响因素研究,提出了盖层有效断接厚度的新概念和计算方法。根据我国部分与断层有关的大-中型气田气柱高度资料,发现了有效断接厚度与所能封闭的最大气柱高度的对数线性关系,并由此提出了评价被断层破坏的盖层封闭能力的新方法。通过对库车坳陷库姆格列木群膏泥岩盖层的应用研究,所得结论与勘探实践完全吻合,证明所提出的评价方法是可行的。     

华南前寒武系基底变质杂岩和中-新生代地幔岩的稀有气体同位素组成及其大地构造意义

对华南前寒武系变质岩浆杂岩稀有气体He、Ne、Ar和Xe的系统研究表明:扬子克拉通基底为含高³He的下地壳"原始岩石层",(³He/⁴He)×10^-6比值为2.8～4.6;而华夏板块基底变质岩浆杂岩则是在缺乏³He、低(³He/⁴He)×10^-8比值(3.15～17.7)的构造环境下形成的大陆中-上地壳变质岩浆杂岩层,反映出两者基底性质迥然不同。华南中-新生代爆破岩筒He同位素组成相反,相对稳定的扬子克拉通(³He/⁴He)×10^-8比值仅0.18～4.22,而郯庐-四会-吴川断裂以东,中-新生代活动地块(太平洋构造域)(³He/⁴He)×10^-8比值高达3.7～20.5。He同位素表明郯庐-四会-吴川断裂带为切割深至地幔的边界深大断裂,是扬子克拉通与华夏板块间的边界且控制了燕山期火山-侵入岩浆向西扩展。Ar同位素组成表明华南大陆中-新生代地幔形成接近"均一"的地幔组份。¹³⁶Xe/¹³⁰Xe-¹²⁹Xe/¹³⁰Xe相关组份表明它们具有地幔柱岩石同位素组成特征。     

内蒙阿右旗铁板井镍矿矿床特征及成因探讨

铁板井绦矿床赋存于辉橄岩体中,辉橄岩体具有全岩矿化的特点,岩体及镍矿体的形成经历了三种不同的成矿过程:首先是岩浆深源液态重力分异作用,而后发生岩浆深源熔离-贯入(成岩、成矿)作用,形成岩体和镍矿体,最后在岩浆期后热液作用的叠加下完成整个成矿过程.该矿床是典型的主要由岩浆熔离作用形成的岩浆矿床.     

引水工程秦巴段隧洞地应力模拟及工程地质问题

利用Ansys有限元软件对三峡引水工程秦巴段线路不同深度、不同截面形态隧洞围岩的应力重分布情况进行模拟计算,得到圆形隧洞、城门形隧洞和马蹄形隧洞围岩的应力数值和等值线图.利用库仑一纳维尔强度准则,对花岗岩区及灰岩区隧洞围岩的剪切破坏进行分析;利用三种岩爆应力判别指标,对岩爆进行初步预测;进而对不同深度、不同截面形态的隧洞围岩的稳定性进行分析;最后对引水工程隧洞设计中截面形态的选择给出了初步建议.     

塔里木盆地西部吐木休克断裂带的主要特征和构造演化

塔里木盆地西部的吐木休克断裂带是中央隆起(前身是晋宁期碰撞造山带)的次级单元巴楚断隆与北部坳陷的次级单元阿瓦提凹陷之间的分界。本文以大量的地质和地球物理证据,证明它是一条内部结构复杂且切穿地壳的深断裂。结合区域构造演化恢复了断裂发育史,指出它经历过三期重大的冲断活动,分别发生在加里东期、海西期和新近纪。新近纪的冲断与巴楚断隆的南界断裂带有相同的构造样式,可分为两幕:中新世的冲断受制于南天山前陆冲断带的向南扩展,更新世的冲断主要受制于西昆仑前陆冲断带的向北扩展。吐木休克断裂带的东西走向段和北西走向段的构造特征尚有若干差异,前者在加里东期活动较强,反映了构造的继承性;北西走向段则是加里东期出现的新生构造,在海西期进一步发展,更新世时因被卷入西昆仑的前陆冲断作用,表现出强烈而复杂的变形。     

喜马拉雅山脉的地质地貌特征:来自SRTM数字高程模型和降水量数据的约束

利用GTOPO30和SRTM3数字高程(DEM)数据,提取了喜马拉雅山脉(造山带)的数字高程模型并对其进行了地质地貌的初步分析。从SRTM3数字高程数据提取出坡度数据,初步分析了喜马拉雅山脉坡度和高程的特征。数字高程和坡度图清楚地展现了喜马拉雅大型断裂带(构造边界)的空间分布特征。分析了中国气象局下属的西藏、青海、四川和云南4省区气象观测台站55年来的年平均降水量观测数据、喜马拉雅山脉南坡的年平均降水量数据、喜马拉雅DEM和裂变径迹数据,发现喜马拉雅山脉从东至西,年平均降水量逐渐减少,地形起伏逐渐变小,而高程渐次升高,与此同时剥蚀速率降低;从北至南,年平均降水量逐渐增加,地形起伏增大,高程快速降低,而剥蚀速率则急剧升高。这充分说明了喜马拉雅年平均降水量大的地区,地表剥蚀作用相对较强,年平均降水量小的地区,地表剥蚀作用则较弱,即:在喜马拉雅地区,长周期的地表剥蚀过程(可长达数个百万年时间尺度)和短周期(仅仅50年)的降水量观测是耦合的。     

三肇凹陷青山口组源岩生成油向下“倒灌”运移层位及其研究意义

为了研究三肇凹陷青山口组源岩生成的油向下“倒灌”运移层位,对油向下“倒灌”运移机制及条件进行了研究,得到三肇凹陷扶杨油层同时具备①青山口组源岩目前应具有足够大的超压;②存在连通青山口组源岩和扶杨油层的T2断裂2个条件,青山口组源岩生成的油能够在超压的作用下在嫩江组沉积末期、明水组沉积末期和古近系沉积末期通过T2断裂向下伏扶杨油层中“倒灌”运移。利用压力封闭原理,对三肇凹陷青山口组源岩生成的油向下“倒灌”运移距离进行了研究,得到三肇凹陷青山口组源岩生成的油向下“倒灌”运移距离一般大于500 m,而三肇凹陷扶杨油层地层厚度最大只有500 m,表明三肇凹陷青山口组源岩生成的油可以向下“倒灌”运移至整个扶杨油层的任何部位。目前三肇凹陷扶杨油层从上至下均含油,且已找到的油藏均分布于青山口组源岩生成的油能够向下“倒灌”运移分布范围内或附近,这表明青山口组源岩生成的油向下“倒灌”运移层位控制着油气富集层位,青山口组源岩生成的油向下“倒灌”运移分布范围控制着三肇凹陷扶杨油层油藏形成与分布范围。青山口组源岩生成的油向下“倒灌”运移分布范围及其附近应是三肇凹陷扶杨油层油下一步勘探的有利地区。