滇西思茅大平掌矿区火山岩特征及其构造环境

滇西大平掌铜多金属矿床的含矿建造(龙洞河组)主要由细碧岩-角斑岩-石英角斑岩和流纹岩-硅质岩组成,伴有部分火山角砾岩、凝灰岩,属双峰式火山岩组合。火山岩具明显的Na2O>K2O和Nb、Ta、Zr、Hf、Ti亏损。岩石化学和微量元素判别标志指示含矿建造形成于岛弧裂陷环境。结合区域构造古地理资料分析,它是滇西南古特提斯洋壳在晚石炭世-早二叠世由西向东俯冲过程中岩浆作用的结果。     

岳西菖蒲地区超高压变质带内的构造地层序列与叠加褶皱型式

以大别造山带南部菖蒲地区为解剖区,结合区域地质调查分析,建立了包括浅变质岩层、超高压变质岩片在内的构造地层序列—岩片组合。对其组成特征、界面性质、形成时代、变形序列等,进行了较系统阐明,并对叠加褶皱型式及形成机制进行了讨论。     

The tectonic regime in Italy inferred from borehole breakout data

In Italy, the horizontal stress directions are well constrained in many regions, but the tectonic regime is not well known because the stress magnitudes are unknown. Our intention is to improve the knowledge of crustal stress in Italy, both at shallow depth and in low seismicity areas. Therefore, we inferred the tectonic regime from the comparison between the depth of breakout occurrence and the physical properties of the rocks in 20 boreholes. The critical value of the maximum horizontal stress, for which the effective tangential stress at the borehole wall overcomes the rock strength to form breakouts, could be computed from rock strength and density. Comparing the theoretical stress distributions for different tectonic regimes with the depth distribution of breakout occurrence, it is possible to infer the tectonic regime that fits best to the breakout depth distribution. We investigated boreholes up to 6 km deep located in different tectonic environments over the Italian peninsula: the Po Plain, the Apenninic chain, the Adriatic foredeep and the Tyrrhenian Quaternary volcanic region. These wells are characterised by breakout data of good quality (A, B and C, according to World Stress Map quality ranking system). The results are in general agreement with the style of faulting derived from earthquake focal mechanisms and other stress indicators. Our results show a predominance of a normal faulting (NF) regime in the inner Apennines and both normal faulting and strike–slip faulting (SS) style in the surrounding regions, possibly also associated with changes in the tectonic regime with depth.     

Numerical models of tectonic deformation at the Baltica–Avalonia transition zone during the Paleocene phase of inversion

Predictions from dynamic modelling of the lithospheric deformation are presented for Northern Europe, where several basins underwent inversion during the Late Cretaceous and Early Cenozoic and contemporary uplift and erosion of sediments occurred. In order to analyse the evolution of the continental lithosphere, the equations for the deformation of a continuum are solved numerically under thin sheet assumption for the lithosphere. The most important stress sources are assumed to be the Late Cretaceous Alpine tectonics; localized rheological heterogeneities can also affect local deformation and stress patterns. Present-day observations available in the studied region and coming from seismic structural interpretations and stress measurements have been used to constrain the model. Our modelling results show that lateral variation in lithospheric strength below the basin systems in Central Europe strongly controls the regional deformation and the stress regime. Furthermore, we have demonstrated that the geometry of the boundary between Baltica and Avalonia, together with different rheological characteristics of the two plates, had a crucial role on local crustal deformation and faulting regime resulting in the Baltica–Avalonia transition zone from the S–N Alpine convergence.     

抚顺城区段浑河断裂现今活动性研究的述评

对以往关于抚顺城区段浑河断裂现今构造活动性的主要文献所采用的地壳形变测量资料及其结论的科学性作了述评，认为得出的抚顺城区段浑河断裂现今构造活动明显或不明显的结论尚缺乏充分的依据，提出了进一步研究该断裂现今构造活动性的建议与方法。     

新疆南天山环境应力场特征

基于新疆强震固定台和流动观测记录的主要和余震加速度资料，选用了三个分向记录都完整的３７次地震。震级范围为１．８－６．８级，震中距为几至几十公里。根据用位错理论二维断裂力学模式推导的震源峰值、加速度与环境剪应力场关系式计算了新疆南天山环境剪应力值。计算结果表明，新疆南天山环境应力平均值偏高，这与新疆处于特殊构造环境条件有关。     

华北北部场源前兆观测资料分析(一)──场源前兆特征与机制

1976年唐山地震前，在距震源很远的地区内都观测到一些前兆趋势变化，如重力、重力位二次徽商W△、水氧、地电阻率、水位和油井出油量等变化。作者认为这些变化不是由震源体直接引起的，而是在区域应力场的作用下，在某些活动断层附近，浅层岩，尤其是含水砂岩层和含油层受挤压出现的一些与地震有关的异常现象。其特征是：（1）异常范围大，可能在距震源很远的地方发生，但就同一种方法的多个观测点来说却又是局部的，即只有其中部分测点才能观测到异常，不少测点观测不到异常。（2）异常发生的时间大致相同。有些异常有同步变化的特征，如同时上升或同时下降。（3）临震前多数异常有恢复的趋势。这些特征与引起异常的机理有关。作者还从理论上计算了这种趋势异常量级，重力变化100×10-6cm／s2左右，重力位二次微商变化（1～2）×10－9／s2，地电阻率变化2％～3％，Rn变化7．4～11．1Bq／L，这样的变化量在活动断层附近的一些台站可能观测到。作者还研究了干旱降雨对某些前兆的影响，其影响量级可以被一些方法观测到，因此在确定是否是地震异常时，必须注意利用综合分析的方法排除干旱降雨的影响，减少异常的多解性。     

华北中北部高级变质岩区的构造区划及其晚太古代构造演化

通过区域构造编图及重点地段的详细研究，在华北克拉通中北部识别出一条ＮＮＥ向的构造带——龙泉关－桑干带，它以大规模的韧性剪切带网络、重熔钾质花岗岩带、数量众多的高压麻粒岩构造透镜体或岩片为特征。剪切带以低角度逆冲为主，矿物拉伸线理指示运动方向为ＮＷ－ＳＥ向。这些剪切带造成东西两侧基底杂岩与表壳岩系包括孔兹岩系的广泛构造叠置，以及高压麻粒岩的近等温减压上隆。从更大的范围看，龙泉关－桑干带处于鄂尔多斯克拉通和阜平－赞皇克拉通之间，并且被五台－吕梁裂谷型绿岩带截切或不整合覆盖。该带应形成于晚太古代，记录了上述两个克拉通斜向拼合的构造过程     

460铀矿床成矿构造背景

４６０矿床为一个大型斑岩型铀－钼矿床。晚侏罗世近东西向分布的火山岩系为铀元素的预富集打下了基础。白垩纪流纹斑岩为其主要的成矿母岩，可能为ＮＥ向展布。早第三纪末期的热液活动使铀进一步富集成矿，在区域应力场作用下，矿体呈ＮＷ走向。晚第三纪的表生淋积作用，使矿体上部近地表处形成次生富集带。基于上述研究，可以进一步明确此类矿床的找矿方向。     

构造层次与大陆壳动力学机制转变关系

针对构造层次研究现状和存在的问题，把大陆壳划分为深部，中部，浅部和浅－表部四个构造层次。依据各自所处特定的构造位置、组成构造岩类型、形成的制约因素和地质时代等方面的区别，各构造层次分别是壳－幔间滑动，大陆张裂、隆－滑构造和变质核杂岩构造等多种大陆壳动力学机制转变过程中的产物。构造层次与大陆壳动力学机制转变关系的确定，更有利于古老板构造连续性、整体性的研究以及多期、多层次、多旋回大陆地壳演化模式的建