Impact of road‐generated storm runoff on a small catchment response

The impact of road‐generated runoff on the hydrological response of a zero‐order basin was monitored for a sequence of 24 storm events. The study was conducted in a zero‐order basin (C1; 0·5ha) with an unpaved mountain road; an adjacent unroaded zero‐order basin (C2; 0·2 ha) with similar topography and lithology was used to evaluate the hydrological behaviour of the affected zero‐order basin prior to construction of the road. The impact of the road at the zero‐order basin scale was highly dependent on the antecedent soil‐moisture conditions, total storm precipitation, and to some extent rainfall intensity. At the beginning of the monitoring period, during dry antecedent conditions, road runoff contributed 50% of the total runoff and 70% of the peak flow from the affected catchment (C1). The response from the unroaded catchment was almost insignificant during dry antecedent conditions. As soil moisture increased, the road exerted less influence on the total runoff from the roaded catchment. For very wet conditions, the influence of road‐generated runoff on total outflow from the roaded catchment diminished to only 5·4%. Both catchments, roaded and unroaded, produced equivalent amount of outflow during very wet antecedent conditions on a unit area basis. The lag time between the rainfall and runoff peaks observed in the unroaded catchment during the monitoring period ranged from 0 to 4 h depending on the amount of precipitation and antecedent conditions, owing mainly to much slower subsurface flow pathways in the unroaded zero‐order basin. In contrast, the lag time in the roaded zero‐order basin was virtually nil during all storms. Copyright © 2009 John Wiley & Sons, Ltd.     

���ڵڶ�����Բ���ֵ������߻��������·���

????????????????????????????????????????????????????·??????÷?????黯γ??????????????????????????????????????????????????????????????????????????????????????t??????     

Geochemical Evidence for Coal and Carbonaceous Mudstone as the Possible Major Oil Source Rock in the Jurassic Turpan Basin,Northwest China

Petroleum geologists have debated whether the hydrocarbons from Jurassic coal measures are derived from the coals, carbonaceous mudstones or coal-measure mudstones in the Turpan Basin. Based on the geochemistry analysis of the 20 crude oils and 40 source rocks from the Turpan Basin, some data have been obtained as follows: carbon preference index and methylphenanthrene index of the Jurassic oils are 1.16–1.45 and 0.28–0.80, and the ααα C29 sterane 20S/(20S+20R) and C29 sterane ββ/(ββ+αα) are 0.44–0.51 and 0.4–0.54 respectively, which show the normal maturity of oils; the vitrinite reflectance of the source rocks from the Xishanyao to Badaowan Formations range from 0.47% to 0.97%, which indicate immature to mature thermal evolutionary stage and sufficient conditions for generating mass mature oil. The effect of hydrocarbon expulsion should be considered when studying the source of coal-derived oil by using Biomarkers. Biomarkers in the Jurassic oils from the basin are similar to those in the coals and carbonaceous mudstones, with a strong predominant content of pristane, relatively high ratio of C15/C16 sesquiterpenoids (>1), a relatively high content of low carbon number tricyclic terpanes and C24 tetracyclic terpane, little gammacerane and C29 Ts detected, an absolute predominant content of C29 sterane and a relatively high content of diasterane. However, the opposite characteristics are shown in mudstones, with an approximately equal content of pristane and phytane, relatively low ratio of C15/C16 sesquiterpenoids (<1), a relatively high content of high carbon number tricyclic terpanes and a low content of C24 tetracyclic terpane, peaks of gammacerane and C29 Ts detected obviously and an increasing C27 sterane content. All of these characteristics identify the coals and carbonaceous mudstones as the possible major oil source rocks in this area, and they were formed in the stronger oxidizing environment with shallower water than mudstones.     

Petrology and Geochemistry of Post-Collisional Early Miocene Volcanism in the Karacada? Area (Central Anatolia, Turkey)

Early Miocene (ca.?21–18 Ma) volcanism in the Karacada? area comprises three groups of volcanic rocks: (1) calcalkaline suite (andesitic to rhyolitic lavas and their pyroclastics), (2) mildly-alkaline suite (alkali basalt, hawaiite, mugearite, benmoreite and trachydacite), and (3) a single trachyandesitic flow unit. Field observations, 40Ar/39Ar ages and geochemical data show that there was a progressive temporal transition from group 1 to 3 in a post-collisional tectonic setting. The calcalkaline suite rocks with medium-K in composition resemble those of subduction-related lavas, whereas the mildly-alkaline suite rocks having a sodic tendency (Na2O/K2O=1.5–3.2) resemble those of within-plate lavas. Incompatible element and Sr-Nd isotopic characteristics of the suites suggest that the lithospheric mantle beneath the Karacada? area was heterogeneously enriched by two processes before collision: (1) enrichment by subduction-related processes, which is important in the genesis of the calcalkaline volcanism, (2) enrichment by small degree melts from the astenosphere, which dominates the mildly alkaline volcanism. Perturbation of the enriched lithosphere by either delamination following collision and uplift or removal of the subducted slab following subduction and collision (i.e., slab breakoff) is the likely mechanism for the initiation of the post-collision volcanism.     

A study on the long term periodicities among the X‐ray binaries: Two new superorbital periods

Long term behaviours of a few selected X‐ray binaries are studied on the basis of RXTE/ASM archive covering a period of ∼13 years of continuous X‐ray data. Two new superorbital periods seem to be revealed for the GX354‐0 and X Persei systems as 8.7 years and 345 days, respectively. Although the X Persei system has two strongest peaks in its power density spectrum at 15.7 years and at 345 days, the latter is much more plausible. The GX354‐0 system also has few additional periodicities appeared in different time intervals (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Recent discoveries of supersoft X‐ray sources in M 31

Classical novae (CNe) have recently been reported to represent the major class of supersoft X‐ray sources (SSSs) in the central area of our neighbouring galaxy M 31. This paper presents a review of results from recent X‐ray observations of M 31 with XMM‐Newton and Chandra. We carried out a dedicated optical and X‐ray monitoring program of CNe and SSSs in the central area ofM 31. We discovered the first SSSs in M 31 globular clusters (GCs) and their connection to the very first discovered CN in a M 31 GC. This result may have an impact on the CN rate in GCs. Furthermore, in our optical and X‐ray monitoring data we discovered the CN M3 1N 2007‐11a, which shows a very short SSS phase of 29–52 days. Short SSS states (durations ≤ 100 days) of CNe indicate massive white dwarfs (WDs) that are candidate progenitors of supernovae type Ia. In the case of M31N 2007‐11a, the optical and X‐ray light curves suggest a binary containing a WD with M_WD > 1.0 M_⊙. Finally, we present the discovery of the SSS counterpart of the CN M31N 2006‐04a. The X‐ray light curve of M31N 2006‐04a shows short‐time variability, which might indicate an orbital period of about 2 hours (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Supersoft X‐ray sources

The workshop “Supersoft X‐ray Sources – New Developments” brought together observers and theoretician to discuss the present status and unsolved problems of supersoft source research. A large part of the workshop was devoted to optical novae and their supersoft state. Large samples of supersoft X‐ray sources were presented from nearby galaxies, as well as extensive monitoring campaigns ofbright individual sources. The theoretical modelling oflight curves and high‐resolution X‐ray spectra are well underway, but details are often not yet understood (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Pulsations and planets: The asteroseismology‐extrasolar‐planet connection

The disciplines of asteroseismology and extrasolar planet science overlap methodically in the branch of high‐precision photometric time series observations. Light curves are, amongst others, useful to measure intrinsic stellar variability due to oscillations, as well as to discover and characterize those extrasolar planets that transit in front of their host stars, periodically causing shallow dips in the observed brightness. Both fields ultimately derive fundamental parameters of stellar and planetary objects, allowing to study for example the physics of various classes of pulsating stars, or the variety of planetary systems, in the overall context of stellar and planetary system formation and evolution. Both methods typically also require extensive spectroscopic follow‐up to fully explore the dynamic characteristics of the processes under investigation. In particularly interesting cases, a combination of observed pulsations and signatures of a planet allows to characterize a system's components to a very high degree of completeness by combining complementary information. The planning of the relevant space missions has consequently converged with respect to science cases, where at the outset there was primarily a coincidence in instrumentation and techniques. Whether space‐ or ground‐based, a specific type of stellar pulsations can themselves be used in an innovative way to search for extrasolar planets. Results from this additional method at the interface of stellar pulsation studies and exoplanet hunts in a beyond‐mainstream area are presented (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A numerical method for the study of shear band propagation in soft rocks

This paper investigates the possibility of interpreting progressive shear failure in hard soils and soft rocks as the result of shear propagation of a pre‐existing natural defect. This is done through the application of the principles of fracture mechanics, a slip‐weakening model (SWM) being used to simulate the non‐linear zone at the tips of the discontinuity. A numerical implementation of the SWM in a computation method based on the boundary element technique of the displacement discontinuity method (DDM) is presented. The crack and the non‐linear zone at the advancing tip are represented through a set of elements, where the displacement discontinuity (DD) in the tangential direction is determined on the basis of a friction law. A residual friction angle is assumed on the crack elements. Shear resistance decreases on elements in the non‐linear zone from a peak value at the tip, which is characteristic of intact material, to the residual value. The simulation of a uniaxial compressive test in plane strain conditions is carried out to exemplify the numerical methodology. The results emphasize the role played by the critical DD on the mechanical behaviour of the specimen. A validation of the model is shown through the back analysis of some experimental observations. The results of this back analysis show that a non‐linear fracture mechanics approach seems very promising to simulate experimental results, in particular with regards to the shear band evolution pattern. Copyright © 2009 John Wiley & Sons, Ltd.     

An elastoplastic strainhardening model for soil allowing for hydraulic bonding–debonding effects

The paper presents a strainhardening constitutive model for unsaturated soil behaviour based on energy conjugated stress variables in the framework of superposed continua. The proposed constitutive law deals with hydro‐mechanical coupling phenomena. The main purpose is to develop within a consistent framework a model that can deal with possible mechanical instabilities occurring in partially saturated materials. The loss of capillary effects during wetting processes can, in fact, play a central role in unstable processes. Therefore, it will be shown that the bonding effects due to surface tensions can be described in a mathematical framework similar to that employed for bonded geomaterials to model weathering or diagenesis effects, either mechanically or chemically induced. The results of several simulations of common laboratory tests on partially saturated soil specimens are shown. The calculated behaviour appears to be in good qualitative agreement with that observed in the laboratory. In particular it is shown that volumetric collapse phenomena due to hydraulic debonding effects can be successfully described by the model. Finally, it will be highlighted the ability of the model to naturally capture the transition to a fully saturated condition and to deal with possible mechanical instabilities in the unsaturated regime. Copyright © 2008 John Wiley & Sons, Ltd.