Spatial Characteristics and Controlling Factors of the Strike‐slip Fault Zones in the Northern Slope of Tazhong Uplift,Tarim Basin: Insight from 3D Seismic Data

The detailed characteristics of the Paleozoic strike-slip fault zones developed in the northern slope of Tazhong uplift are closely related to hydrocarbon explorations. In this study, five major strike-slip fault zones that cut through the Cambrian-Middle Devonian units are identified, by using 3D seismic data. Each of the strike-slip fault zones is characterized by two styles of deformation, namely deeper strike-slip faults and shallower en-echelon faults. By counting the reverse separation of the horizon along the deeper faults, activity intensity on the deeper strike-slip faults in the south is stronger than that on the northern ones. The angle between the strike of the shallower en-echelon normal faults and the principal displacement zone(PDZ) below them is likely to have a tendency to decrease slightly from the south to the north, which may indicate that activity intensity on the shallower southern en-echelon faults is stronger than that on the northern ones. Comparing the reverse separation along the deeper faults and the fault throw of the shallower faults, activity intensity of the Fault zone S1 is similar across different layers, while the activity intensity of the southern faults is larger than that of the northern ones. It is obvious that both the activity intensity of the same layer in different fault zones and different layers in the same fault zone have a macro characteristic in that the southern faults show stronger activity intensity than the northern ones. The Late Ordovician décollement layer developed in the Tazhong area and the peripheral tectonic events of the Tarim Basin have been considered two main factors in the differential deformation characteristics of the strike-slip fault zones in the northern slope of Tazhong uplift. They controlled the differences in the multi-level and multi-stage deformations of the strike-slip faults, respectively. In particular, peripheral tectonic events of the Tarim Basin were the dynamic source of the formatting and evolution of the strike-slip fault zones, and good candidates to accommodate the differential activity intensity of these faults.     

氡测量在成都平原隐伏断裂研究中的初步应用

通过成都平原大邑—竹瓦铺—五珠沱断裂带、双流—成都—德阳断裂带两条NWW向隐伏断裂进行放射性伽玛能谱和氡气测量,对所获得的相关数据进行对比分析,用放射性测量的方法进一步确认和解释了这两条隐伏断裂的存在。     

On CO<Subscript>2</Subscript> fluid flow and heat transfer behavior in the subsurface,following leakage from a geologic storage reservoir

Geologic storage of CO₂ is expected to produce plumes of large areal extent, and some leakage may occur along fractures, fault zones, or improperly plugged pre-existing wellbores. A review of physical and chemical processes accompanying leakage suggests a potential for self-enhancement. The numerical simulations presented here confirm this expectation, but reveal self-limiting features as well. It seems unlikely that CO₂ leakage could trigger a high-energy run-away discharge, a so-called “pneumatic eruption,” but present understanding is insufficient to rule out this possibility. The most promising avenue for increasing understanding of CO₂ leakage behavior is the study of natural analogues.     

Overprinted strike-slip deformation in the southern Valley and Ridge in Pennsylvania

Two major faults, over 32 km long and 6.4 km apart, truncate or overprint most previous folds and faults as they trend more northerly than the previous N25°E to N40°E fold trends. The faults were imposed as the last event in a region undergoing sequential counter-clockwise generation of tectonic structures. The western Big Cove anticline has an early NW verging thrust fault that emplaces resistant rocks on its NW limb. A 16 km overprint by the Cove Fault is manifested as 30 small northeast striking right-lateral strike-slip faults. This suggests major left-lateral strike-slip separation on the Cove Fault, but steep, dip-slip separation also occurs. From south to north the Cove Fault passes from SE dipping beds within the Big Cove anticline, to the vertical beds of the NW limb. Then it crosses four extended, separated, Tuscarora blocks along the ridge, brings Cambro-Ordovician carbonates against Devonian beds, and initiates the zone of overprinted right-lateral faults. Finally, it deflects the Lat 40°N fault zone as it crosses to the next major anticline to the northwest. To the east, the major Path Valley Fault rotates and overprints the earlier Carrick Valley thrust. The Path Valley Fault and Cove Fault may be Mesozoic in age, based upon fault fabrics and overprinting on the east–west Lat 40°N faults.     

Polygonal deformation bands

We report for the first time the occurrence of polygonal faults in sandstone, which is compelling given that layer-bound polygonal fault systems have been observed so far only in fine-grained sediments such as clay and chalk. The polygonal faults are shear deformation bands that developed under shallow burial conditions via strain hardening in dm-wide zones. The edges of the polygons are 1–5 m long. The shear deformation bands are organized as conjugate faults along each edge of the polygon and form characteristic horst-like structures. The individual deformation bands have slip magnitudes ranging from a few mm to 1.5 cm; the cumulative average slip magnitude in a zone is up to 10 cm. The deformation bands heaves, in aggregate form, accommodate a small isotropic horizontal extension (strain <0.005). The individual shear deformation bands show abutting T-junctions, veering, curving, and merging where they mechanically interact. Crosscutting relationships are rare. The interactions of the deformation bands are similar to those of mode I opening fractures. The documented fault networks have important implications for evaluating the geometry of km-scale polygonal fault systems in the subsurface, top seal integrity, as well as constraining paleo-tectonic stress regimes.     

Effects of low- to high-angle normal faults on sedimentary architectures in the Eocene Wenchang Formation,Enping Sag,Pearl River Mouth Basin,South China Sea

The effects of low- to high-angle (>30°) normal faults on sedimentary architectural units in the Eocene Wenchang Formation, Enping Sag, Pearl River Mouth Basin (PRMB), South China Sea were investigated utilising a high-quality 3D seismic data set and restored paleogeomorphology. It has been shown that sequence stratigraphic units and sedimentary architecture are significantly controlled by the low- to high-angle normal faults. The Wenchang Formation, a second-order sequence, can be subdivided into two para-second-sequences (the Lower and Upper Wenchang sequences, E₂W^L and E₂W^U) and seven third-order sequences (from base to top: SQ1～SQ7). The low-angle fault confined sequence architecture of the Wenchang Formation is mainly characterised by lateral stacking with the ratio of the vertical subsidence (V) to horizontal slip (H) being reduced from 1/2 for E₂W^L to 1/6 for E₂W^U. In contrast, the high-angle fault confined sequence is characterised by vertical stacking with the ratio of V/H close to 1 for sequences SQ1 to SQ7. In the 3D seismic area, the features of sediment-dispersal pattern were interpreted based on an integrated analysis of paleogeomorphology, seismic reflection characteristics, stratal thickness distribution and multiple attribute clustering. The results show that the large-scale fan delta, belt-shape lacustrine deposit and bird-foot braided delta systems mainly developed in the low-angle fault confined sequences, whereas small-scale fan delta, rhombus-shaped lacustrine deposit and lobe-shaped braided delta systems inherited tectono-sedimentary architectures in the high-angle fault confined sequences.     

Steerable Pyramid分解在储层断裂检测中的应用

在隐蔽油气藏勘探中,正确刻画储层断裂对于油气勘探和开发都有着至关重要的作用.储层断裂在地震数据中表现为边缘特征.但现今多尺度边缘检测的基本理论和方法都有其本身的局限性.本文详细阐述了Steerable Pyramid分解用于储层断裂检测的基本原理和方法.输入的三维地震切片经过Steerable Pyramid分解后,不仅可以分析不同尺度不同方向上断裂的特征及走向,还可以通过重构得到经S函数控制的断裂信息,该断裂信息不仅仅是断裂的边缘检测,而是增强的断裂本身.将该算法应用于实际地震切片的断裂检测,得到了清晰的断裂信息,完整细致地展现了这些地质类型的特征,为构造解释、地震相表征及储层预测提供了有用信息.     

川滇地块南部主要断裂现今形变特征及危险性分析

本文利用川滇地块南部30余年的跨断层观测资料,计算了跨断层场地的三维活动量,分析了区域内断裂的现今形变特征以及川滇地块南部的运动方式,认为部分断裂现今表现出异常活动的现象,川滇地块南部整体表现出以水平顺时针旋转为主的运动学特征,并对该区域中短期地震危险性做出了初步推测。     

Normal fault growth and linkage in the Gediz (Alaşehir) Graben,Western Turkey,revealed by transient river long‐profiles and slope‐break knickpoints

The Gediz (Ala?ehir) Graben is located in the highly tectonically active and seismogenic region of Western Turkey. The rivers upstream of the normal fault‐bounded graben each contain a non‐lithologic knickpoint, including those that drain through inferred fault segment boundaries. Knickpoint heights measured vertically from the fault scale with footwall relief and documented fault throw (vertical displacement). Consequently, we deduce these knickpoints were initiated by an increase in slip rate on the basin‐bounding fault, driven by linkage of the three main fault segments of the high‐angle graben bounding fault array. Fault interaction theory and ratios of channel steepness suggest that the slip rate enhancement factor on linkage was a factor of 3. We combine this information with geomorphic and structural constraints to estimate that linkage took place between 0.6 Ma and 1 Ma. Calculated pre‐ and post‐linkage throw rates are 0.6 and 2 mm/yr respectively. Maximum knickpoint retreat rates upstream of the faults range from 4.5 to 28 mm/yr, faster than for similar catchments upstream of normal faults in the Central Apennines and the Hatay Graben of Turkey, and implying a fluvial landscape response time of 1.6 to 2.7 Myr. We explore the relative controls of drainage area and precipitation on these retreat rates, and conclude that while climate variation and fault throw rate partially explain the variations seen, lithology remains a potentially important but poorly characterised variable. Copyright © 2016 John Wiley & Sons, Ltd.     

Structural style and tectono-stratigraphic evolution of the Neogene–Quaternary Siderno Basin,southern Calabrian Arc,Italy

The Neogene–Quaternary Siderno Basin is located in the southern Calabrian Arc, along an E–W transect including the Ionian side and part of the Tyrrhenian margin. The orogenic belt was generated by ongoing northward subduction of Ionian oceanic lithosphere beginning in the Early Cretaceous. Since the Oligocene, the area has experienced complex tectonics, including NW–SE-oriented pull-apart basins. The forearc region contains >2000 m of Oligocene-to-Quaternary strata that cover pre-Tertiary rocks. The succession forms an E-dipping monocline, with tectonic growth structures increasing upward. Erosional truncations and thickness variations suggest a different evolution for the Siderno Basin, which in comparison with northern and southern parts of the Ionian accretionary wedge, evolved differently during the Serravallian–Tortonian stages. NW–SE and NE–SW fault systems are dominant, the first exhibiting strike–slip and normal kinematics in the Nicotera–Gioiosa and Molochio–Antonimina fault zones. These structures were active during infilling of the Neogene basin, and represent a complex transfer zone.

The NE–SW system shows two types of tectonic kinematics: (1) a compressive stage, with NW–SE-orientated shortening, responsible for inversion tectonics documented by east-verging folds, thrusts, and back-thrusts, and (2) emplacement of the variegated clay during the Langhian, which is related to back-thrust propagation. The strike–slip accommodated stress generated in the accretionary prism in response to subduction of Ionian lithosphere and progradation of the accretionary front of the Calabrian forearc.