Bedrock structure in Adapazari, Turkey—a possible cause of severe damage by the 1999 Kociaeli earthquake

The 1999 Kocaeli earthquake brought serious damage to downtown of Adapazari. To study why strong motions were generated at the town, a bedrock structure was investigated on the basis of Bouguer gravity anomaly, and SPAC and H/V analyses of microseisms. It was revealed that, the basin consists of three narrow depressions of bedrock with very steep edges, extending in E–W or NE–SW directions along the North Anatolia faults, and the depth to bedrock reaches 1000 m or more. Downtown of Adapazari is located 1–2 km apart from the basin-edge. It is considered that, the specific configuration of bedrock amplifies ground motions at the downtown area by focusing of seismic waves and/or interference between incident S-waves and surface-waves secondarily generated at the basin-edge. Studying 3D bedrock structure is an urgent issue for microzoning an urban area in a sedimentary basin.     

A rifted inside corner massif on the Mid-Atlantic Ridge at 5°S

The structure of the Mid-Atlantic Ridge at 5°S was investigated during a recent cruise with the FS Meteor. A major dextral transform fault (hereafter the 5°S FZ) offsets the ridge left-laterally by 80 km. Just south of the transform and to the west of the median valley, the inside corner (IC – the region bounded by the ridge and the active transform) is marked by a major massif, characterized by a corrugated upper surface. Fossil IC massifs can also be identified further to the west. Unusually, a massif almost as high as the IC massif also characterizes the outside corner (OC) south of the inactive fracture zone and to the east of the median valley. This OC massif has axis-parallel dimensions identical to the IC massif and both are bounded on their sides closest to the spreading axis by abrupt, steep slopes. An axial volcanic ridge is well developed in the median valley both south of the IC/OC massifs and in an abandoned rift valley to the east of the OC massif, but is absent along the new ridge-axis segment between the IC and OC massifs. Wide-angle seismic data show that between the massifs, the crust of the median valley thins markedly towards the FZ. These observations are consistent with the formation of the OC massif by the rifting of an IC core complex and the development of a new spreading centre between the IC and OC massifs. The split IC massif presents an opportunity to study the internal structure of the footwall of a detachment fault, from the corrugated fault surface to deeper beneath the fault, without recourse to drilling. Preliminary dredging recovered gabbros from the scarp slope of the rifted IC massif, and serpentinites and gabbros from the intersection of this scarp with the corrugated surface. This is compatible with a concentration of serpentinites along the detachment surface, even where the massif internally is largely plutonic in nature.     

Stochastic Structural Modeling

A consistent stochastic model for faults and horizons is described. The faults are represented as a parametric invertible deformation operator. The faults may truncate each other. The horizons are modeled as correlated Gaussian fields and are represented in a grid. Petrophysical variables may be modeled in a reservoir before faulting in order to describe the juxtaposition effect of the faulting. It is possible to condition the realization on petrophysics, horizons, and fault plane observations in wells in addition to seismic data. The transmissibility in the fault plane may also be included in the model. Four different methods to integrate the fault and horizon models in a common model is described. The method is illustrated on an example from a real petroleum field with 18 interpreted faults that are handled stochastically.     

Curvature analysis of triangulated surfaces in structural geology

This paper addresses the problem of characterizing the shape of a geological surface on the basis of its principal curvatures. The surface is assumed to be modeled as a set of adjacent triangles defined by the location of their vertices and a method is proposed for estimating numerically the principal curvatures at the vertices of the triangles using a local C² interpolant. Also shown is how principal curvatures can be useful for studying the deformation of a geological surface (with application to 3D balanced unfolding), and analyzing the folding or faulting of the interface between two adjacent layers.     

Microseismicity and active deformation of Messinia,SW Greece

By deploying a 30 3-component digital seismic array in the Messiniakos gulf and the surrounding region, we recorded for a period of 45 days the microseismic activity. With a minimum of six records per event, we located 1121 earthquakes corresponding to an average of 20 events per day. For the hypocenter location we used a local velocity model adopted to two controlled source seismic experiments. Within the array, traveltime residuals were within ± 0.2 s and the epicentral accuracy in the order of ± 2 km, while the hypocentral one is twice this value. Correlation of the seismicity with the tectonic elements indicated that most of the NW-SE oriented faults are active with strike-slip movement along this orientation and extension perpendicular to it. The neogene basins of Messini, Meligalas and Megalopolis are seismically very active and their eastern flanks are delineated by higher seismic activity than their western ones. This indicates that the basins are asymmetric with master faults defining their eastern-northeastern flanks. This hypothesis is supported by the asymmetric structure mapped at the offshore Messiniakos basin as densely spaced high resolution reflection seismic profiles have revealed. The western margins of the basins are less deformed and the seismic activity is dispersed over several minor NW-SE faults. Since the NW-SE striking faults onshore are truncated by major NE-SW oriented ones, their overall length is shortened, reducing their seismic potential and capacity to store large stresses that could produce events above Ms6.1. Offshore western Messinia, in the Ionian Sea, the size and activity of the faults is significantly larger and prone to develop events of larger magnitudes. Subcrustal seismicity indicates a deepening of the foci to the east-northeast.Part of this work was presented at the CIESM Conference, Monaco, 2001, and in the EGS General Assembly, Nice, 2001.     

Investigation of upper crust anisotropy in Ghaen-Birjand region, east-central Iran

IntroductionWhenpropagatingthroughananisotropicmedium,ashearwavesplitsintotwo(quasi)shearwaveswithdifferentpropagationspeedsandpolarizedorthogonally.Owingtotherecentdevel-opmentofseismicobservationsystem,detectionofshearwavessplittingwithverysmalldelaytimesbetweenfasterandslowershearwavesbecameavailableandprovidedpowerfulapproachfordetectionofcrustalanisotropy.Crampin(1978)emphasizedtheroleofalignedmicrocracksasacauseofcrustalanisotropyandpointedoutthatforverticallyalignedmicrocracksthedirecti…     

L'accident du Toulourenc : une limite tectonique entre la plate-forme provençale et le Bassin vocontien à l'Aptien–Albien (SE France)

The WNW–ESE trending Toulourenc Fault Zone (TFZ) is the western segment of the major Ventoux–Lure Fault Zone, which separates the Provençal platform from the Baronnies Vocontian Basin. The TFZ was subject to polyphased Mid-Cretaceous movements, during the Early Aptian and Middle–Late Albian times. The latter faulting episode generated conglomerates and olistoliths resulting from dismantled faultscarps cutting Barremian–Bedoulian limestones. The deformation is related to compressional wrench faulting (NE–SW sinistral faults; dextral component for the TFZ). It induced the uplift of the northwestern corner of the platform, as indicated by a mid-Cretaceous hiatus (Early Aptian pro parte to Early Albian) narrowly delimited in space. The opening of submeridian grabens within the platform favoured the northward transit of channelised coarse-grained Albian sands originating from a southern area. To cite this article: C. Montenat et al., C. R. Geoscience 336 (2004).     

A new interpretation of terraces in the Taranto Gulf: the role of extensional faulting

The Taranto Gulf of southern Italy provides an excellent case where it is possible to document the importance of normal faults in displacing terraced deposits. The study area is located at the front of the southern Apennines, that is a fold-and-thrust belt developed following the closure of the Mesozoic Tethys Ocean, and the deformation of the Adriatic passive margin during Tertiary and Quaternary times. The outer, eastern parts of the belt were structured in Quaternary, i.e. up to Middle Pleistocene times.The front of the chain is partially sealed by Pliocene–Pleistocene foredeep deposits, which represent the infill of the Bradanic Trough. The upper portion of the middle Pleistocene succession consists of marine sands and conglomerates that in the previous literature have been arranged in several orders of terraces. Analysis of aerial photographs and geomorphological mapping has shown the occurrence of prominent geomorphic lineaments, which appear to control the local drainage pattern. Some of these structures coincide with the map trace of normal faults that produce vertical offsets of the marine terrace surfaces in the order of ca. 10 m each. Many of the fault escarpments reduce their elevation and terminate laterally. In other cases fault escarpments are laterally continuous and can be traced for up to 3–4 km. Scarp height is between 2 and 10 m. Their mean trend ranges from NNE–SSW to ENE–WSW and defines an arcuate pattern that mimics the present coastline.An accurate geomorphological, sedimentological and stratigraphic analysis has been carried out in a selected area of the Bradanic Trough (Pisticci transect) to investigate in detail the relationships between normal faults and the development of the terraces. This analysis allowed us to recognise five facies associations related to the upper and lower beachface and to the neritic clays which represent the substratum of the terraces. More importantly, we observed that all the terraced deposits in the Pisticci transect could be referred to a single sedimentary body displaced by faults. The terraced deposits are related to an event of beach progradation, of Middle Pleistocene age, which has been documented in other areas of the Italian peninsula. These results outline an intimate relationship between the arcuate trend of the recognised fault set and the present coastline pattern. The development of the normal faults can be related to large-scale gravitational processes developed after the general tilting towards the SE of the Bradanic Trough.     

Image processing of 2D resistivity data for imaging faults

A methodology to locate automatically limits or boundaries between different geological bodies in 2D electrical tomography is proposed, using a crest line extraction process in gradient images. This method is applied on several synthetic models and on field data set acquired on three experimental sites during the European project PALEOSIS where trenches were dug. The results presented in this work are valid for electrical tomographies data collected with a Wenner-alpha array and computed with an l₁ norm (blocky inversion) as optimization method. For the synthetic cases, three geometric contexts are modelled: a vertical and a dipping fault juxtaposing two different geological formations and a step-like structure. A superficial layer can cover each geological structure. In these three situations, the method locates the synthetic faults and layer boundaries, and determines fault displacement but with several limitations. The estimated fault positions correlate exactly with the synthetic ones if a conductive (or no superficial) layer overlies the studied structure. When a resistive layer with a thickness of 6 m covers the model, faults are positioned with a maximum error of 1 m. Moreover, when a resistive and/or a thick top layer is present, the resolution significantly decreases for the fault displacement estimation (error up to 150%). The tests with the synthetic models for surveys using the Wenner-alpha array indicate that the proposed methodology is best suited to vertical and horizontal contacts. Application of the methodology to real data sets shows that a lateral resistivity contrast of 1:5–1:10 leads to exact faults location. A fault contact with a resistivity contrast of 1:0.75 and overlaid by a resistive layer with a thickness of 1 m gives an error location ranging from 1 to 3 m. Moreover, no result is obtained for a contact with very low contrasts (1:0.85) overlaid by a resistive soil. The method shows poor results when vertical gradients are greater than horizontal ones. This kind of image processing technique should be systematically used for improving the objectiveness of tomography interpretation when looking for limits between geological objects.