内蒙古阴山地区特异区域重磁场与深部构造

根据内蒙古阴山山系及邻近地区的布格重力异常分布特征，发现阴山、大青山山地和呼包盆地地区的布格重力异常分布与地形高程呈“同步型”的特异变化特征.而该地区航磁异常分布呈现为阴山山区是大面积负磁异常区，呼包盆地为强正磁异常区的特异磁异常分布特征.通过对地震、大地电磁数据、特别是重力数据资料的处理分析，给出阴山山系和呼包盆地地区的地壳结构，均表明地壳底界面都没有明显的下凹与上凸，且盆地北缘为两大块体的接触带.这些特征可能表征着阴山山系和呼包盆地重磁异常呈特异变化的一些原因.     

新疆阿尔泰山南缘乔夏哈拉式铁铜矿床稀土元素地球化学特征及其地质意义

通过野外地质调查和系统的稀土元素地球化学研究，探讨了阿尔泰山南缘乔夏哈拉式铁铜矿床中磁铁矿矿体和块状富铜矿体的成因关系及找矿意义。研究表明，乔夏哈拉铁铜矿床中铁矿体和富铜矿体的稀土元素组成及配分模式迥然不同。前者具有低∑REE、富轻稀土元素及正铕异常等特点，指示火山成因性质；后者异常富集轻稀土元素、配分曲线向右倾陡，其成因可能与造山期中基性浅成岩浆作用有关。据此认为，铁矿体和铜矿体并非“同生”成因关系，很可能是两期成矿作用在空间上的“同位叠生”关系。     

Landslides in the Central Coalfield (Cantabrian Mountains, NW Spain): Geomorphological features, conditioning factors and methodological implications in susceptibility assessment

A geomorphological study focussing on slope instability and landslide susceptibility modelling was performed on a 278 km² area in the Nalón River Basin (Central Coalfield, NW Spain). The methodology of the study includes: 1) geomorphological mapping at both 1:5000 and 1:25,000 scales based on air-photo interpretation and field work; 2) Digital Terrain Model (DTM) creation and overlay of geomorphological and DTM layers in a Geographical Information System (GIS); and 3) statistical treatment of variables using SPSS and development of a logistic regression model. A total of 603 mass movements including earth flow and debris flow were inventoried and were classified into two groups according to their size. This study focuses on the first group with small mass movements (10⁰ to 10¹ m in size), which often cause damage to infrastructures and even victims. The detected conditioning factors of these landslides are lithology (soils and colluviums), vegetation (pasture) and topography. DTM analyses show that high instabilities are linked to slopes with NE and SW orientations, curvature values between − 6 and − 0.7, and slope values from 16° to 30°. Bedrock lithology (Carboniferous sandstone and siltstone), presence of Quaternary soils and sediments, vegetation, and the topographical factors were used to develop a landslide susceptibility model using the logistic regression method. Application of “zoom method” allows us to accurately detect small mass movements using a 5-m grid cell data even if geomorphological mapping is done at a 1:25,000 scale.     

Morphology of step-pools in a wilderness headwater stream: The importance of standardizing geomorphic measurements

The morphology of step-pools and cascades reflect the geological and climatic factors affecting channels in mountain watersheds. This study uses longitudinal and cross-section surveys to describe a headwater stream in the Boston Mountains of the Ozarks Plateau region in Arkansas and develop morphological relationships for comparisons with other regions. In the Bowers Hollow Creek watershed (3.5 km²), located within the boundaries of the Upper Buffalo Wilderness Area, step height and wavelength relationships are generally similar to those reported from other regions. Step-pool reaches were widely distributed in a discontinuous manner throughout the watershed. Average values of the sampled reaches are: reach slopes, 0.105 m/m; width, 6.10 m; crest particle sizes, 440 mm; step heights, 0.87 m; and step wavelengths, 6.62 m. The mean step steepness for the watershed was 0.13, whereas the mean length of a reach step to height ratio was 9:1. A comparison of morphological definitions found that the values of step height and steepness can vary by > 30% according to how step parameters are defined. Step height is particularly sensitive; thus, comparison of step height-based relationships from published data requires great care.     

Structural style and deformation mechanism of the southern Dabashan foreland fold-and-thrust belt, central China

The Daba Mountains define the southern margin of the East Qinling orogenic belt, and form the boundary of the Sichuan basin in the north and northeast. The Daba Mountains can be divided into two structural belts by the NW-striking Chengkou fault, namely the northern Dabashan thrust-nappe belt and the southern Dabashan foreland fold-and-thrust belt. The southern Dabashan fold-and-thrust belt is a southwestward extruding thin-skinned thrust wedge, showing obvious belted change in deformation style and deformation intensity along the dip direction, and can be divided further into three sub-belts, i.e. the imbricate thrust sub-belt characterized by imbricate stepped-thrust sheets, the thrust-fold sub-belt characterized by the combination of the equally-developed thrusts and related folds, and the detachment-fold sub-belt characterized by box folds and closed overturned-isoclinal folds on the outcrops. Several kinds of structures have been recognized or inferred, including imbricate thrust system, passive-roof duplex (triangle zone), fault-related folds, back-thrust system and pop-up structure. The NE-SW compressive stress from the Qinling orogenic belt and detachment layers in the covering strata are the two most important determinants of deformation style. After the collision between the North China block and Yangtze block at the end of the Middle Triassic, the northward intracontinental subduction along the southern edge of the Qinling orogenic belt was initiated, which led to the corresponding southward thrusting in the upper crust. The thrusting propagated towards the foreland through the Jurassic and extended to the southernmost part of the southern Daba Mountains around the end of the Early Cretaceous, with thrusting deformation to be preferentially developed along major detachment layers and progressing upwards from the Lower Sinian through the Lower Cambrian and Silurian to Middle-Lower Triassic. Translated from Geotectonica et Metallogenia, 2006, 30(3): 294–304 [译自: 大地构造与成矿学]     

Astronomical time scale for the Middle Oxfordian to Late Kimmeridgian in the Swiss and French Jura Mountains

Detailed investigation of facies and sedimentary structures reveals that, during the Middle Oxfordian to Late Kimmeridgian, the shallow carbonate platform of the Swiss and French Jura Mountains recorded high-frequency sea-level fluctuations quite faithfully. The cyclostratigraphic analysis within the established biostratigraphic and sequence-chronostratigraphic framework implies that the resulting hierarchically stacked depositional sequences formed in tune with the orbital cycles of precession (20 kyr) and eccentricity (100 and 400 kyr). The astronomical time scale presented here is based on the correlation of 19 platform sections and 4 hemipelagic sections from south-eastern France where good biostratigraphic control is available. The cyclostratigraphic interpretation suggests that the interval between sequence boundaries Ox4 and Kim1 (early Middle Oxfordian to earliest Kimmeridgian) lasted 3.2 myr and that the Kimmeridgian sensu gallico has a duration of 3.2 to 3.3 myr. The astronomical time scale proposed here is compared to time scales established by other authors in other regions and the discrepancies are discussed. Despite these discrepancies, there is a potential to estimate the durations of ammonite zones and depositional sequences more precisely and to better evaluate the rates of sedimentary, ecological and diagenetic processes. Editorial handling: Hanspeter Funk, Helmut Weissert, Stefan Bucher     

Responses of streamflow to climate change in the northern slope of Tianshan Mountains in Xinjiang: A case study of the Toutun River basin

A case study on the responses of streamflow to climate change in the Toutun River basin was carried out based on data analysis of streamflow, precipitation, and temperatures during the past 50 years.Temporal series of the streamflow change in the Toutun River basin was analyzed and tested using the Mann-Kendall nonparametric test. Results revealed that the annual runoff of the Toutun River had been in a monotonic decreasing trend for the past 50 years. Compared with the 1950s and 1960s, the annual runoff in the 1990s decreased by 4.0×105 m3 and 7.2×105 m3. The precipitation did not show monotonic trend during the past 50 years, but the annual temperature increased by 1.12℃ since the 1950s. Further data analysis indicated that the monthly runoff of the Toutun River decreased significantly from August to October, with precipitation displaying the similar pattern of seasonal change. Analysis suggests that the reduction of streamflow in the Toutun River basin is possibly caused by the seasonal change of precipitation, especially the precipitation reduction in summer, and temperature increases.     

Feedbacks between erosion and sediment transport in experimental bedrock channels

Natural bedrock rivers flow in self‐formed channels and form diverse erosional morphologies. The parameters that collectively define channel morphology (e.g. width, slope, bed roughness, bedrock exposure, sediment size distribution) all influence river incision rates and dynamically adjust in poorly understood ways to imposed fluid and sediment fluxes. To explore the mechanics of river incision, we conducted laboratory experiments in which the complexities of natural bedrock channels were reduced to a homogenous brittle substrate (sand and cement), a single sediment size primarily transported as bedload, a single erosion mechanism (abrasion) and sediment‐starved transport conditions. We find that patterns of erosion both create and are sensitive functions of the evolving bed topography because of feedbacks between the turbulent flow field, sediment transport and bottom roughness. Abrasion only occurs where sediment impacts the bed, and so positive feedback occurs between the sediment preferentially drawn to topographic lows by gravity and the further erosion of these lows. However, the spatial focusing of erosion results in tortuous flow paths and erosional forms (inner channels, scoops, potholes), which dissipate flow energy. This energy dissipation is a negative feedback that reduces sediment transport capacity, inhibiting further incision and ultimately leading to channel morphologies adjusted to just transport the imposed sediment load. Copyright © 2007 John Wiley & Sons, Ltd.     

Subduction of Continental Crust in the Early Palaeozoic North Qaidam Ultrahigh-Pressure Metamorphic Belt, NW China:Evidence from the Discovery of Coesite in the Belt

Coesite was discovered as inclusions in zircon separates from pelitic gneiss associated with a large eclogite body in the North Qaidam ultrahigh-pressure (UHP) terrane. Some graphite inclusions were also found. This finding suggested the occurrence of in-situ UHP metamorphism and that the terrane was most likely recrystallized at pressures below the diamond stability field. It supported other previous indirect UHP evidence, such as polycrystalline quartz inclusions in eclogitic garnet, quartz lamellae in omphacite and P-T estimates for both eclogite and garnet peridotite. The U-Pb and Sm-Nd ages of the North Qaidam eclogite indicated that subduction of continental crust occurred in the Early Palaeozoic, which probably recorded a collision between the Sino-Korean and Yangtze plates.     

On Continent-Continent Point-Collision and Ultrahigh-Pressure Metamorphism

Up to now it is known that almost all ultrahigh-pressure (UHP) metamorphism of non-impact origin occurred in continent-continent collisional orogenic belt, as has been evidenced by many outcrops in the eastern hemisphere. UHP metamorphic rocks are represented by coesite- and diamond-bearing eclogites and eclogite facies metamorphic rocks formed at 650-800℃ and 2.6-3.5 GPa, and most of the protoliths of UHP rocks are volcanic-sedimentary sequences of continental crust. From these it may be deduced that deep subduction of continental crust may have occurred. However, UHP rocks are exposed on the surface or occur near the surface now, which implies that they have been exhumed from great depths. The mechanism of deep subduction of continental crust and subsequent exhumation has been a hot topic of the research on continental dynamics, but there are divergent views. The focus of the dispute is how deep continental crust is subducted so that UHP rocks can be formed and what mechanism causes it to be subducte