新疆阿尔泰造山带构造作用的锆石裂变径迹分析

在新疆阿尔泰造山带所获得的19个锆石裂变径迹年龄变化于155-243Ma之间，明显地分为2组，分别对应于2个构造活动期，早期为155-189Ma，晚期为189-243Ma。这与磷灰石裂变径迹年龄反映的62-100Ma和100-160Ma两个构造期完全一致。早期和晚期构造活动期持续的时间分别为54-60Ma和34-38Ma，而这两个构造期之间的间隔时间，则从早到晚由83-89Ma变为89-93Ma。同时，锆石裂变径迹年龄与距特斯巴汗断裂和巴寨断裂的距离有关，反映这两条断裂带对区域构造演化的控制作用。     

Intragrain oxygen isotope zoning in titanite by SIMS: Cooling rates and fluid infiltration along the Carthage‐Colton Mylonite Zone,Adirondack Mountains,NY, USA

Oxygen isotopes are an attractive target for zoning studies because of the ubiquity of oxygen‐bearing minerals and the dependence of mineral ¹⁸O/¹⁶O ratios on temperature and fluid composition. In this study, subtle intragrain oxygen isotope zoning in titanite is resolved at the 10‐μm scale by secondary ion mass spectrometry. The patterns of δ¹⁸O zoning differ depending on microstructural context of individual grains and reflect multiple processes, including diffusive oxygen exchange, partial recrystallization, grain‐size reduction, and grain growth. Using the chronological framework provided by structural relations, these processes can be related to specific events during the Grenville orogeny. Titanite was sampled from two outcrops within the Carthage‐Colton Mylonite Zone (CCMZ), a long‐lived shear zone that ultimately accommodated exhumation of the Adirondack Highlands from beneath the Adirondack Lowlands during the Ottawan phase (1090–1020 Ma) of the Grenville orogeny. Titanite is hosted in the Diana metasyenite complex, which preserves three sequentially developed fabrics: an early NW‐dipping protomylonitic fabric (S₁) is crosscut by near‐vertical ultramylonitic shear zones (S₂), which are locally reoriented by a NNW‐dipping mylonitic fabric (S₃). Texturally early titanite (pre‐S₂) shows diffusion‐dominated δ¹⁸O zoning that records cooling from peak Ottawan, granulite‐facies conditions. Numerical diffusion models in the program Fast Grain Boundary yield good fits to observed δ¹⁸O profiles for cooling rates of 50 ± 20 °C Ma^?1, which are considerably faster than the 1–5 °C Ma^?1 cooling rates previously inferred for the Adirondack Highlands from regional thermochronology. High cooling rates are consistent with an episode of rapid shearing and exhumation along the CCMZ during gravitational collapse of the Ottawan orogen at c. 1050 Ma. Texturally later titanite (syn‐S₂) has higher overall δ¹⁸O and shows a transition from diffusion‐dominated to recrystallization‐dominated δ¹⁸O zoning, indicating infiltration of elevated‐δ¹⁸O fluids along S₂ shear zones and continued shearing below the blocking temperature for oxygen (~≤500 °C for grain sizes at the study site). The texturally latest titanite (post‐S₃) has growth‐dominated δ¹⁸O zoning, consistent with porphyroblastic grain growth following cessation of shearing along the Harrisville segment of the CCMZ.     

Late Cenomanian environmental conditions at the submerged Tatric Ridge,Central Western Carpathians during the period preceding Oceanic Anoxic Event 2 – A palaeontological and isotopic approach

Micropalaeontological and isotopic studies of the upper Cenomanian turbiditic/hemipelagic sediments from the High-Tatric unit (Central Western Carpathians; Polish part of the Tatra Mountains) has been undertaken to characterize the sedimentary conditions in the Tatric basin, a part of the Western Tethys, related to the interval preceding the late Cenomanian oceanic anoxic event (OAE2). The deposition of these sediments, including organic-rich layers (TOC up to 0.7%), corresponds to the Rotalipora cushmani foraminiferal Zone. Microfacial, foraminiferal and palynological analyses show that the sea floor was located at upper bathyal depths and the water column was poorly oxygenated. The intrabasinal carbonate material indicates moderate primary productivity with rare periods of upwellings. The scarcity of marine fossils in redeposited material and features of carbonate lithoclasts suggest very low productivity in the nearshore surface water, most probably due to a low-density hyposaline cap as surface runoff from the southern margin of the basin. The carbon isotopic study documents the negative values of δ¹³C_carb in the whole section as an effect of transfer of isotopically light carbon sourced from various sources. Such negative values of δ¹³C_carb are characteristic of the upper Cenomanian sediments, deposited in relatively shallow water basins, characterized by input of terrestrial organic matter and/or carbonate particles known from the Western Interior sections, the Atlantic coastal plain, the northwestern African margin, the eastern margin of the Apulian Platform and shelf sediments in the NW Europe and Tethyan Himalayas. Most probably, all of these events could be related to the global sea level fluctuations that occurred ca. 95.5–94.5 Ma comparing with the Haq (2014) eustatic curve.     

大兴安岭北段争光金矿床成因探讨:来自流体包裹体及稳定同位素的制约

争光浅成低温热液型金矿床位于大兴安岭成矿带北段,是多宝山矿集区内的一个重要矿床。文章通过流体包裹体和C_H_O_He_Ar同位素的系统研究,对该矿床成矿流体和矿床成因进行了深入探讨。矿床成矿作用可划分为4个主要阶段:石英_黄铁矿阶段(成矿前阶段)、石英_多金属硫化物阶段(主成矿阶段)、方解石_(石英)_多金属硫化物阶段(主成矿阶段)和方解石阶段(成矿后阶段)。流体包裹体研究表明,争光金矿床主要发育富液相流体包裹体。石英_黄铁矿阶段、方解石_(石英)_多金属硫化物阶段和方解石阶段流体包裹体的均一温度分别介于116~243℃(集中于150~170℃)、129~294℃(集中于140~160℃)和130~155℃(集中于130~150℃);w(NaCleq)分别介于0.9%~10.1%、1.2%~13.8%和2.7%~8.7%。成矿流体具有低温、低盐度、相对还原的特征,属H_2O_Na Cl体系。石英_黄铁矿阶段成矿流体的δD和δ18O分别为-127‰~-110‰和-5.9‰~0.6‰,蚀变围岩的δD值和δ18O值分别为-118‰~-108‰和6.3‰~7.9‰。方解石_(石英)_多金属硫化物阶段和方解石阶段方解石的δ~(13)C分别为-5.3‰~-2.0‰和-2.9‰~-2.2‰,δ18O分别为7.7‰~9.3‰和9.9‰~13.5‰。黄铁矿流体包裹体的~3He/~4He、~(40)Ar/~(36)Ar和~(40)Ar*/4He比值分别为1.75~3.06 Ra、683~1295和0.30~0.63。综合流体包裹体特征和稳定同位素组成,认为成矿早阶段成矿流体为大气降水与围岩发生水_岩反应后的演化水。随着成矿作用的进行,成矿流体变为大气降水与岩浆水的混合水,但仍以大气降水为主导。成矿流体与贫H_2S的流体混合和硫化物沉淀的共同作用可能是该矿床金沉淀的主要机制。     

中条山地区郭家沟基性-超基性岩体的岩石成因及地质意义

文章通过对中条山地区郭家沟基性-超基性岩体的岩石学、矿物学和岩石地球化学方面的分析研究,讨论了该岩体的形成时代、岩石成因、及其地质意义。郭家沟岩体侵入时代为元古代,可能与绛县群形成时代较为相近(2200Ma左右)。郭家沟岩体具有岩相分带现象,边缘相为辉长岩,向内渐变过渡为含长辉石岩、变余辉石岩(角闪石岩)等,在岩体的中心发育着磁铁透闪石岩;岩石中Mg O与其他主量元素线性相关,各类岩石地球化学特征较为相似,显示出岩石受分离结晶作用的影响,具有岩浆同源演化的趋势;岩石总体显示出低硅、低镁、高铁、高钛、高钙的特征,相对富集LREE和LILE,而亏损HREE和Nb、Ta、Zr、Y等高场强元素,轻重稀土分馏明显,具有较弱的Eu异常,V含量较高,具有阿拉斯加型侵入岩体和与火山弧相关的岩浆特征。从岩石组合及地球化学特征结合区域构造演化,认为岩体形成于大陆边缘弧的构造环境,从侧面也说明绛县群的形成环境应该是大陆边缘俯冲后的伸展环境,而非陆内裂谷。     

内蒙古赤峰市阿根他拉钠长斑岩型铁矿矿床地质特征与成因探讨

内蒙古赤峰市阿根他拉铁矿是一个可以小规模开采的铁矿与钠长石矿。铁矿所赋存的岩体为原生钠长斑岩,其可能由深部的花岗闪长岩岩浆演化而来。铁矿化可分为两个阶段,第一阶段为黑云母/绿泥石—石英—磁铁矿阶段,为本区主要的铁矿化阶段,形成网脉状—浸染状的磁铁矿矿石。该阶段成矿岩体为斑岩、网脉状矿化、伴生矿化组合与斑岩型矿床可类比及磁铁矿的(Ca+Al+Mn)—(Ti+V)图解位于斑岩型矿床中,表明该阶段具有类似于斑岩型矿床的特征。第二阶段为绿帘石—磁铁矿/赤铁矿阶段,形成可达工业品位的团块状磁铁矿/赤铁矿矿石。该阶段类似于矽卡岩型铁矿的团块状矿石,及磁铁矿的(Ca+Al+Mn)—(Ti+V)图解位于矽卡岩型铁铜矿床中,表明该阶段具有类似于矽卡岩型铁矿床的特征。将如上与钠长斑岩有关,前期表现为类似斑岩型矿床特征,后期表现为类似矽卡岩型铁矿床特征的铁矿,称为钠长斑岩型铁矿。这类铁矿应注重与绿帘石伴生的团块状铁矿的寻找。对比研究表明,钠长斑岩型铁矿明显有别于长江中下游的玢岩铁矿。     

松辽盆地西缘早白垩世伸展事件：流纹岩锆石U Pb年龄、地球化学研究

为研究松辽盆地西缘大兴安岭早白垩世火山岩的构造属性,对研究区内流纹岩开展锆石U-Pb测年和地球化学测定。锆石U-Pb定年结果显示,流纹岩形成于131.6±0.6~123.9±1.7Ma,属早白垩世。主量元素分析表明,流纹岩具高硅(SiO_2=69.08%~79.58%)、富碱(K_2O+Na_2O=5.93%~9.76%,平均为8.14),富钾(K_2O/Na_2O大于1.0,平均为2.14)、贫钙镁(平均CaO为0.60、MgO为0.27)和高FeOT/MgO(平均为6.77)比值的特征,属过铝质(A/CNK=1.35~1.78)高钾钙碱性—钾玄武岩系列岩石。据微量元素地球化学特征将其划分为两组:Ⅰ组流纹岩稀土元素总量较高(∑REE介于149.04×10~(-6)~213.18×10~(-6)之间,平均为172.35×10~(-6)),轻稀土元素(LREE)富集、轻重稀土元素分馏较强[(La/Yb)_N=4.89~11.87,平均为7.75)],中等—弱负铕异常(δEu=0.54~0.88,平均为0.70),配分曲线右倾模式,强烈富集大离子亲石元素(LILE)Rb,Ba,Th,K和亏损高场强元素(HFSE)_Nb,Ta,P和Ti;Ⅱ组流纹岩以稀土总量(∑REE平均为142.60×10~(-6))相对较低,具相对较强的负铕异常(δEu=0.05~0.46,平均为0.27),配分曲线相对较平缓以及Ba,Sr,P,Ti元素的强烈亏损与Ⅰ组流纹岩相区别,两组流纹岩地球化学成分相关性较好,二者均有低的Sr(206×10~(-6))和高Yb(大于2)含量,具壳源和造山后花岗岩的特征。结合最新资料及本文研究成果,初步认为研究区流纹岩为地壳部分熔融的产物,之后经历强烈的矿物分离结晶作用,与蒙古—鄂霍次克造山后伸展作用有关。     

东昆仑花石峡北部上二叠统格曲组源区特征:来自碎屑组成和岩石地球化学的证据

东昆仑南缘上二叠统（乐平统）格曲组为一套由砾岩、砂岩和钙质泥岩构成的扇三角洲-浅海碳酸盐台地相沉积组合,记录了东昆仑造山带海西-印支过渡期构造演化过程,是解析该构造演化过程的理想对象。通过分析花石峡北坦地克借地区格曲组碎屑岩的碎屑组成与主量、微量和稀土元素特征,探讨了其物源区属性。结果显示,砂岩类型为长石砂岩和岩屑长石砂岩,石英、长石和岩屑平均含量分别为50.9%、36.8%、12.4%,长石以钾长石为主,岩屑和砾石成分复杂。砂岩的SiO₂、Al₂O₃、TiO₂、TFe₂O₃、MgO、K₂O和Na₂O平均百分含量分别为62.06%、13.26%、0.44%、4.53%、3.02%、2.42%和3.18%;微量元素比值Th/Sc和Th/U较高,平均为1.06和7.71;稀土元素总量∑REE平均120.43×10-6,LREE/HREE和（La/Yb）_N均值分别为9.34和12,轻稀土相对富集,δEu平均为0.96,Eu异常不明显,REE特征与大陆岛弧背景区杂砂岩相似,与东昆仑地体加里东期俯冲-碰撞型火山弧花岗岩具有亲缘性。碎屑组分和主量、微量元素特征与判别图解揭示,格曲组砂岩物源区为海西旋回早期从东昆仑地体裂离的东昆南微地块,源岩以花岗岩为主,变质岩、沉积岩和酸性-基性火山岩较少,其中花岗岩形成构造背景为加里东期的大陆岛弧。结合区域地质和前人研究成果,认为格曲组为前陆盆地系统的隆后盆地沉积。     

天山南麓库车晚新生代褶皱-冲断带

库车褶皱冲断带位于天山南麓,由近东西走向的多条构造带组成。三叠系暗色泥岩、侏罗系煤层、古近系库姆格列木组膏盐层和新近系吉迪克组膏盐层构成库车褶皱冲断带的区域性主滑脱面。褶皱冲断带底面由北向南逐渐抬高。褶皱冲断带主体发育盖层滑脱-冲断构造(薄皮构造),基底卷入型冲断构造(厚皮构造)见于北缘的根带。新生界膏盐层之上构造变形以滑脱褶皱为特色,之下以冲断构造为特色。库车褶皱冲断带是印度-亚洲碰撞远程效应下,(南)天山晚新生代造山过程的产物。褶皱冲断带构造变形的动力来源主要是造山楔向塔里木盆地推进所形成的挤压构造应力。褶皱冲断带构造变形的起始时间为约23Ma,构造变形具有阶段式加速的特点,已经识别出约23Ma、约10Ma、5~2Ma和1~0Ma共4个变形加速期。褶皱冲断带的演化过程为前展式,褶皱冲断带前锋向南推进的同时,后缘持续变形。     

The Exhumation History of North Qaidam Thrust Belt Constrained by Apatite Fission Track Thermochronology: Implication for the Evolution of the Tibetan Plateau

Determining the spatio-temporal distribution of the deformation tied to the India-Eurasian convergence and the impact of pre-existing weaknesses on the Cenozoic crustal deformation is significant for understanding how the convergence between India and Eurasia contributed to the development of the Tibetan Plateau. The exhumation history of the northeastern Tibetan Plateau was addressed in this research using a new apatite fission track (AFT) study in the North Qaidam thrust belt (NQTB). Three granite samples collected from the Qaidam Shan pluton in the north tied to the Qaidam Shan thrust, with AFT ages clustering in the Eocene to Miocene. The other thirteen samples obtained from the Luliang Shan and Yuka plutons in the south related to the Luliang Shan thrust and they have showed predominantly the Cretaceous AFT ages. Related thermal history modeling based on grain ages and track lengths indicates rapid cooling events during the Eocene-early Oligocene and since late Miocene within the Qaidam Shan, in contrast to those in the Cretaceous and since the Oligocene-Miocene in the Luliang Shan and Yuka region. The results, combined with published the Cretaceous thermochronological ages in the Qaidam Shan region, suggest that the NQTB had undergo rapid exhumation during the accretions along the southern Asian Andean-type margin prior to the India-Eurasian collision. The Cenozoic deformation initially took place in the North Qaidam thrust belt by the Eocene, which is consistent with the recent claim that the deformation of the northeastern Tibetan Plateau initiated in the Eocene as a response to continental collision between India and Eurasia. The immediate deformation responding to the collision is tentatively attributed to the pre-existing weaknesses of the lithosphere, and therefore the deformation of the northeastern Tibetan Plateau should be regarded as a boundary-condition-dependent process.