从闪长质岩石包体角度探讨太行山——燕山造山带壳幔成矿作用

文中首次从闪长质岩包体的角度讨论了上地幔，中，下地壳成分及岩浆演化过程对成矿作用的影响，指出太行山－燕山造山带成矿作用及其区域成矿规律明显受到壳幔成矿体系的制     

The effect of mountainous topography on moisture exchange between the “surface” and the free atmosphere

Typical numerical weather and climate prediction models apply parameterizations to describe the subgrid-scale exchange of moisture, heat and momentum between the surface and the free atmosphere. To a large degree, the underlying assumptions are based on empirical knowledge obtained from measurements in the atmospheric boundary layer over flat and homogeneous topography. It is, however, still unclear what happens if the topography is complex and steep. Not only is the applicability of classical turbulence schemes questionable in principle over such terrain, but mountains additionally induce vertical fluxes on the meso-γ scale. Examples are thermally or mechanically driven valley winds, which are neither resolved nor parameterized by climate models but nevertheless contribute to vertical exchange. Attempts to quantify these processes and to evaluate their impact on climate simulations have so far been scarce. Here, results from a case study in the Riviera Valley in southern Switzerland are presented. In previous work, measurements from the MAP-Riviera field campaign have been used to evaluate and configure a high-resolution large-eddy simulation code (ARPS). This model is here applied with a horizontal grid spacing of 350 m to detect and quantify the relevant exchange processes between the valley atmosphere (i.e. the ground “surface” in a coarse model) and the free atmosphere aloft. As an example, vertical export of moisture is evaluated for three fair-weather summer days. The simulations show that moisture exchange with the free atmosphere is indeed no longer governed by turbulent motions alone. Other mechanisms become important, such as mass export due to topographic narrowing or the interaction of thermally driven cross-valley circulations. Under certain atmospheric conditions, these topographical-related mechanisms exceed the “classical” turbulent contributions a coarse model would see by several times. The study shows that conventional subgrid-scale parameterizations can indeed be far off from reality if applied over complex topography, and that large-eddy simulations could provide a helpful tool for their improvement.     

三维地震勘探激发参数选择与分析

文中介绍了山区进行三维地震勘探的重要性及其方法原理。以山西晋城煤业集团某勘探区为实例进行实地勘探和试验,并对试验结果进行了详细的分析,进一步验证了该方法的可行性。     

开平向斜—清凉山背斜地质构造成因分析

运用地质力学原理，揭示了开平向斜－清凉山背斜地质构造的成因。     

皖西大别山五大水库生态系统服务功能价值评估

根据皖西大别山5大水库水资源特征,将其水生态系统服务划分为直接使用价值和间接使用价值2大类8个小类,以2010年为评价基准年份,运用市场价值法、费用支出法、替代工程法等环境经济价值评估方法,对大别山5大水库生态系统服务功能价值定量评价。研究结果表明,2010年5大水库生态系统服务功能的总价值为60.59亿元,占当年六安市国内生产总值的8.95%,其中直接使用价值为19.62亿元,占总价值的32.41%;间接使用价值为40.97亿元,占总价值的67.59%。调蓄洪水和水资源蓄积的功能价值构成比例高,分别为34.32%和32.51%,水库在防御洪涝灾害和涵养水源方面具有重要的作用。     

Inversion of coseismic stress-triggered fault slips using borehole strainmeter observations

Coseismic stress-triggering is becoming a new hot spot of research. Coseismic strain steps recorded by borehole strainmeters are particularly valuable in studying coseismic stress-triggered fault slips. Based on the theory of dis location, one can invert the triggered fault slips with such data if he/she has a well understanding about the local faults. Genetic algorithm can be applied to significantly raise the efficiency of searching a best solution among all possibilities in this kind of inversion. A testifying check of the program and analyses of each parameter＇s influence may further enhance the reliability of inversion results. Taking complexity of geological structure into account, the inversion results should be regarded as the predominant property or a comprehensive effect of triggered local faults＇ activities. As an attempt, we inverted the assumingly active faults＇ slips triggered by the Ms=8.1 Kunlun Mountain earthquake over Beijing area.     

四川龙门山南段东缘泥石流

当地断裂众多，岩体破碎，崩塌滑坡遍布，加之是强震带和川西大暴雨中心区，相对高度３００—３５００ｍ，泥石流形成条件极为充分．泥石流沟汇水面积小，沟床比降陡，主沟长度短．绵竹汉旺后山泥石流综合治理后，可成为一个示例．     

中条山同善天窗铜矿类型及找矿新认识

在总结同善构造—剥蚀窗内成矿地质条件的前提下 ,运用成矿系列理论 ,把区内具有多种表现形式的变基性火山岩型、变砂岩型、大理岩型三大类铜矿分成了八种亚类 ,认为诸类铜矿与区内广泛发育的新太古代基性岩存在着成生联系 ,铜矿的形成经历了一个复杂的过程。早期的海底火山喷发带来的铁、铜、硫等成矿物质 ,经过最初的海水富集、火山活动末期的热液作用富集以及后来区域变质叠加富集进而形成了这一系列矿床。同时提出了新的找矿思路、找矿方法及找矿靶区。     

秦岭某钼矿区开发对东川河流域Cd的影响

为了探索矿业活动对河流水质产生的影响,以秦岭某大型钼矿区下游的东川河流域为研究对象,通过现场采样与室内测试的方法,分析了地表水、沉积物、岩矿样品中重金属Cd的含量特征。采用污染超标倍数法、地累积指数法及Hakanson潜在生态风险评价法分别对东川河流域的河水和底泥样品进行了污染现状评价和生态风险程度评价,最后讨论了Cd的来源。结果表明:东川河主沟16个河水采样点位中,有11个点位的Cd含量明显高于未受矿业活动影响的对照区各点位Cd含量值,Cd含量变异系数达到95.65%,并且从上游到下游各点位Cd含量呈偏态分布,说明东川河流域Cd受矿业活动影响显著。东川河主沟16个河水采样点中有15个Cd含量满足地表水Ⅱ类水标准,比重为93.75%,可以判断东川河整体水质较好。仅5号点位超Ⅱ类水质标准,污染超标倍数为1,为轻度污染。地累积指数分析结果表明,东川河主沟11个底泥样品均存在不同程度的污染:污染最严重的10号点位达到中度-强污染级别;污染最轻的8、9、13号点位为无污染-中度污染;大多数点位为中度污染。东川河主沟11件底泥样品重金属Cd的潜在生态危害指数平均值为120.27,表明东川河主沟底泥总体达到强生态风险程度。酸性矿山废水、原生地质背景、底泥释放、大气干湿降尘等是造成东川河流域Cd重金属污染的主要污染源。     

天目山千亩田泥炭腐殖化度记录的中全新世气候变化

以14C测年为基础,构建了天目山千亩田地区泥炭沼泽剖面年龄-深度模式曲线,通过该区的腐殖化度与烧失量分析研究,发现两者呈现出很好的相关性,共同记录了该地区4 200 aBP以来的气候变化,可划分出3个主要阶段:早期(4 135±40~3 200 aBP)泥炭腐殖化度偏低,指示气候湿热;中期(3 200~630 aBP)泥炭腐殖化度偏高,指示气候温凉偏干;晚期(630 aBP以来),泥炭腐殖化度偏低,气候温凉湿润。