VIIRS/DNB夜间灯光月度产品插补方法对比——以北京为例

新一代VIIRS/DNB(Visible Infrared Imaging Radiometer Suite Day/Night Band)夜间灯光数据因其具备更精细的时空分辨率、数据不存在饱和现象、不同年份数据可比性强等优点而迅速代替DMSP/OLS(Defense Meteorological Satellite Program's Operational Linescan System)夜间灯光数据成为新的研究热点。但由于杂散光的污染,VIIRS/DNB夏季数据数值缺失严重,致使数据在空间和时间上不连续,因此,插补缺失数据成为后续应用的前提。鉴于此,论文从插补结果异常值、与参照值对比、计算性能三个方面,系统比较了三次样条插值(样条)、三次Hermite插值(Hermite)、灰色预测模型(GM)、三次指数平滑法(指数)4种插补方法的适用性,以期为插补VIIRS/DNB夜间灯光数据提供方法选择的依据。研究结果表明：①异常值比较方面,Hermite法未出现异常值,另外3种算法仅出现少量异常值(0.02%~1.34%);②与参照值的对比方面,Hermite法与参考值接近程度最高,GM接近程度最低,样条法和指数法介于两者中间;③算法性能比较方面,4种方法都具备计算简单、容易编程的特点,但指数法的算法时长是另外3种方法的10倍以上。因此,综合多方表现,当插补月份前后两侧均有足够长的原始数据时,插补效果好、计算速度快、不会出现过冲现象的Hermite法最适宜,样条法次之;当插补月份仅单侧有足够长的数据时,适宜采用指数法(插补效果好、计算速度较慢)或GM(插补效果偏低、计算速度快)进行插补。     

A stochastic method for the prediction of icebreaker bow extreme stresses

It is well established that the ship-ice interaction process is quite complex and associated ice loads on the icebreaker hull is a stochastic process. Obviously, novel accurate statistical methods and models should be developed and applied to estimate extreme bow stresses.This paper studies icebreaker bow stresses based on measured distribution of ice thickness in the Arctic Ocean on the way to and from the North Pole. Since the vessel route was carefully selected searching for easier ice conditions, the Arctic Ocean crossing was not a straight linear but a meandering path. Thus, the specific ship route data was biased with respect to general ice statistics in the region, but true with respect to the route specific ice data encountered by a ship navigating in that region. Therefore the route specific ice thickness data is directly needed for ship design and navigation analysis. It is assumed that captains are competent and knowledgeable, and therefore will select a route that provides the most favourable ice conditions.This paper contributes to study of the newest Chinese self-designed polar icebreaker, serving the purpose of enhancing icebreaker operational reliability. Finite Element Method software package ANSYS/LS-DYNA has been employed to simulate bow stress pattern for a particular icebreaker operating in the Arctic Ocean. Extreme bow stresses were estimated using Naess-Gaidai method. The latter is a first application of Naess-Gaidai method to a distribution with lower bound. Thus this paper aims at introducing an efficient method of estimating route-specific icebreaker extreme bow stresses.     

联合BDS/GPS的北斗广域差分实时电离层延迟格网改正方法研究

研究并实现中国区域北斗广域差分实时电离层延迟格网改正算法,针对北斗单系统实时建立电离层延迟格网的不足,提出联合BDS/GPS的北斗广域差分实时电离层延迟改正方法。比较BDS、GPS以及BDS/GPS观测的实时电离层延迟格网,并利用北斗单频单点伪距定位进行精度验证。结果表明,在有效格网点覆盖充足的地区,BDS与GPS实时电离层延迟格网定位效果相当;而联合BDS/GPS观测的实时电离层延迟格网极大提高了偏远地区的单频定位精度与可定位历元数,也使原本单系统格网覆盖充足的地区定位效果得到进一步增强和稳定。     

浙江省台州-昌化深部构造特征探测

采用高分辨折射和宽角反射/折射综合地震探测方法,在浙江省中部沿黄岩、临海、东阳、桐庐、昌化进行深部构造探测,获得一条长约350km的速度结构剖面。探测结果表明,地壳结构具有明显的多层性,存在3个速度间断面;基底速度结构图像揭示了速度结构的横向非均匀性,这种不均匀性既对应于地质构造单元的分界线或断裂构造带,也反映出东西部构造特征的差异性。     

GPS/PWV时间序列特征提取方法的研究

针对GAMIT/GLOBK软件解算得到的4 a GPS/PWV时间序列的特征提取问题,提出基于滤波辅助的部分集成经验模态分解（PEEMD）与Hilbert谱分析相结合的特征提取方法。首先,在PEEMD方法的基础上,结合滤波辅助的PEEMD方法与Hilbert谱分析,建立GPS/PWV时间序列特征提取模型;然后,将所提出的方法应用于TNML测站4 a的GPS/PWV长时间序列和7 d的GPS/PWV短时间序列分析中,并将滤波辅助的PEEMD结果与传统的小波分解结果进行对比。结果表明,该特征提取方法能准确有效地提取出 GPS/PWV时间序列中的周年周期和日周期特征分量,滤波辅助的PEEMD分解结果与小波分解结果一致,且提取的特征分量与原始信号更加吻合。     

Comparisons of several evaporation/precipitation datasets for the Bohai Sea based on salinity simulation

Evaporation (E) rate and precipitation (P) rate are two significant meteorological elements required in the ocean baroclinic modeling as external forcings. However, there are some uncertainties in the currently used E/P rates datasets, especially in terms of the data quality. In this study, we collected E/P rates data from ERA-40, NCEP/NCAR Reanalysis, HOAPS for the Bohai Sea and nine routine stations around Laizhou Bay, and made comparisons among them. It was found that the differences in E/P rates between land and sea are remarkable, which was due to the difference in underlying surfaces. Therefore, the traditional way of using E/P rates acquired on land directly at sea is not correct. Since no final conclusion has been reached concerning the net water transport between the Bohai Sea and the Yellow Sea, it is unfeasible to judge the adequacy of the four kinds of data by using the water budget equation. However, the E/P rates at ERA-40 sea points were considered to be the optimal in terms of temporal/spatial coverage and resolution for the hindcast of salinity variation in the Bohai Sea. Besides, using the 3-D hydrodynamic model HAMSOM (HAMburg Shelf Ocean Model), we performed numerical experiments with different E/P datasets and found that the E/P rates at sea points from ERA-40 dataset are better than those from NCEP/NCAR Reanalysis dataset. If NCEP/NCAR Reanalysis E/P rates are to be used, they need to be adjusted and tested prior to simulation so that more close-to-reality salinity values can be reproduced.     

Baja California 边缘PC14 岩芯海水表层温度及生产力变化的百年尺度记录

加利福尼亚流是北太平洋环流的重要组成部分,它的变化对全球气候及碳循环有重要影响.对位于东北太平洋低纬区BajaCalifornia外海的PC14柱状样进行了有机地球化学分析,重建了过去14ka来这一地区百年尺度的海水表面温度及生产力变化,发现其存在明显的B/A(Bling-Aller)和YD(Younger Drays)事件,但B/A和YD事件温度变化幅度小于中纬度地区.与中纬度加利福尼亚流系早中全新世温度降低不同,PC14全新世温度无明显变化趋势.这些结果表明了东太平洋低纬地区对高纬地区的气候响应以及沿岸上升流和ENSO现象对加利福尼亚流系中纬和低纬地区的影响不同.从冰消期到全新世,PC14生产力呈现阶段上升趋势,指示了由E1 Nino气候向La Nifia气候的转化以及沿岸上升流加强的总体趋势.在全新世中后期(6.5-3.8ka)生产力的降低,则可能是受ENSO加强的影响.在B/A暖期,PC14生产力增加不多,但氧最小层强度增加,这表明生产力变化不是东太平洋边缘海的氧最小层强化的控制因素.     

高精度高性价比的GPS定向仪的设计

介绍了一种高精度、高性价比的GPS定位定向仪的设计及实现（〈1mil,2σ）方法,系统利用了实际应用中的有利约束条件,对基于LAMBDA方法的载波相位整周模糊度解算算法进行了改进,经过系统工程设计,在实际应用中实现了单频、高精度、快速定向数据的输出。可以满足绝大多数环境下的使用需求,大大降低了系统成本。     

Accuracy assessment of digital elevation models by means of robust statistical methods

Measures for the accuracy assessment of Digital Elevation Models (DEMs) are discussed and characteristics of DEMs derived from laser scanning and automated photogrammetry are presented. Such DEMs are very dense and relatively accurate in open terrain. Built-up and wooded areas, however, need automated filtering and classification in order to generate terrain (bare earth) data when Digital Terrain Models (DTMs) have to be produced. Automated processing of the raw data is not always successful. Systematic errors and many outliers at both methods (laser scanning and digital photogrammetry) may therefore be present in the data sets. We discuss requirements for the reference data with respect to accuracy and propose robust statistical methods as accuracy measures. Their use is illustrated by application at four practical examples. It is concluded that measures such as median, normalized median absolute deviation, and sample quantiles should be used in the accuracy assessment of such DEMs. Furthermore, the question is discussed how large a sample size is needed in order to obtain sufficiently precise estimates of the new accuracy measures and relevant formulae are presented.     

改进的P-SVM支持向量机与遥感数据分类

本文介绍了将P-SVM算法引入多光谱/高分辨率遥感数据的分类, 并且展示了卫星ASTER和航空ADS40数字影像分类的技术过程和结果验证。结果表明：P-SVM方法的分类精度不低于SVM, 并减少了时耗。