Triggered earthquakes and deep well activities

Earthquakes can be triggered by any significant perturbation of the hydrologic regime. In areas where potentially active faults are already close to failure, the increased pore pressure resulting from fluid injection, or, alternatively, the massive extraction of fluid or gas, can induce sufficient stress and/or strain changes that, with time, can lead to sudden catastrophic failure in a major earthquake. Injection-induced earthquakes typically result from the reduction in frictional strength along preexisting, nearby faults caused by the increased formation fluid pressure. Earthquakes associated with production appear to respond to more complex mechanisms of subsidence, crustal unloading, and poroelastic changes in response to applied strains induced by the massive withdrawal of subsurface material. As each of these different types of triggered events can occur up to several years after well activities have begun (or even several years after all well activities have stopped), this suggests that the actual triggering process may be a very complex combination of effects, particularly if both fluid extraction and injection have taken place locally. To date, more than thirty cases of earthquakes triggered by well activities can be documented throughout the United States and Canada. Based on these case histories, it is evident that, owing to preexisting stress conditions in the upper crust, certain areas tend to have higher probabilities of exhibiting such induced seismicity.     

二苯硫脲－甲基异丁酮泡塑富集液珠萃取比色法测定化探样品中的金银

在１０％ＨＣＩ介质中，采用二苯硫脲（ＤＰＴＵ）－甲基异丁酮（ＭＩＢＫ）泡沫塑料富集，以金试剂液珠萃取比色法测定了化探样品中的Ａｕ和Ａｇ。方法的检出限：Ａｕ０．５×１０￣－９；Ａｓ５×１０￣－９（１０ｇ称样）。利用此方法制备了“野外快速分析箱”，可在野外简陋条件下进行现场测定。     

Spatial distribution and bonding forms of heavy metals in sediments along the middle course of the River Elbe (km 287ċ390)

Sediments of eight groyne fields along the middle course of the River Elbe (river km 287?390) were geochemically studied. The 78 sediment samples were analysed for pH and grain size distribution. The grain size fraction < 2 μm was used for mineralogical and chemical analysis: semiquantitative clay mineral analysis; total element content (Al, Ca, Fe, K, Mn, Cd, Cr, Cu, Ni, Pb, Zn), total inorganic and organic C, and bonding form fractionation with a six‐step sequential chemical extraction. The latter was performed on selected samples (n = 32). The sediments along the Elbe's course are still contaminated with heavy metals far above the local geogenic background level. An enrichment factor of more than 15 was calculated for zinc. Cr and Ni are the elements with the lowest enrichment. The bonding form analysis of selected heavy metals shows a dominance of relatively immobile bonding forms, e. g. the moderately reducible and the residual fraction, which implies a relative low mobility potential. Only Zn poses a higher potential threat to the environment, since it has a higher percentage of the first three extracted phases: adsorbed, carbonate, and easily reducible fraction.     

抑制型离子色谱法同时测定水中锂和锶

对离子色谱法测定水中的锂、锶含量及其影响因素进行了研究。以甲烷磺酸为流动相，用IonPacCS12A阳离子色谱柱分离后，电导检测器同时测定矿泉水中锂和锶，其检出限分别为0．003mg／L和0．006mg／L。对Li^＋和Sr^2＋的离子色谱条件进行了优化，并对流动相的选择及干扰离子的影响进行了讨论。     

离子色谱法测定五氧化二铌和五氧化二钽中痕量氟氯和硫酸根离子的前处理方法

采用马弗炉将样品与NaOH混合进行熔融煅烧，热去离子水提取、离心、稀释后过OnGuard Ⅱ H柱和过滤膜进行前处理，抑制型电导离子色谱法检测，测定了Ta2O5和Nb2O5的氟离子、氯离子和硫酸根离子。该方法对三种被测阴离子的检测限（s／N=3）在0．15～0．70μg／g（以固体样品实际浓度计）或0．136～0．623μg／L（以溶液浓度计），标准曲线线性范围均在两个数量级以上，方法的精密度（RSD，n=7）小于5．46％，回收率为88％～106％，具有灵敏度高、选择性好、重现性佳、对环境友好等特点，用于实际样品的检测，结果令人满意。     

基于Hough变换的建筑物半自动提取

提出了一种基于Hough变换的建筑物半自动提取方法.该方法针对由人工给定建筑物的初始角点并通过统计屋顶主方向对Hough变换的搜索范围和搜索角度进行限制,从而稳定快速地提取出屋顶的边缘.然后利用最小二乘的方法对提取出的屋顶边缘进行精确对中,实现了对平顶直角建筑物以及人字形建筑物的有效提取.     

基于标点随机过程的遥感影像道路提取

在分析贝叶斯方法用于遥感影像目标提取技术的基础上．基于标点随机过程方法，利用线状地物的整体几何约束和地物之间的空间结构及相关关系对目标构建数学模型．提取线状地物．并以道路网的自动提取为例，详细阐述了此算法。     

数字图像处理在道路交通数据采集中的应用研究

主要研究数字图像处理技术在MDCS中对于交通标志信息自动识别的应用，通过多级图像提取和多种特征识别和匹配算法，提高交通标志识别的准确率，从而大大提高交通标志数据的采集和更新周期。