利用奇异谱分析提高极移中长期预报精度

由于空间大地观测数据传输耗时及处理过程复杂, 导致极移测量值的获取存在时延, 无法满足对高精度的极移预报值有重大需求的应用领域. 针对极移复杂的时变特性, 提出一种基于奇异谱分析(singular spectrum analysis, SSA)的预报方法. 首先用SSA分离提取极移时序中的高频组分与低频组分; 其次建立最小二乘(least square, LS)外推与自回归(AutoreGressive, AR)模型对极移高频和低频组分进行组合预报. 结果表明, SSA方法能够准确地分离和提取极移低频和高频组分, 对低频和高频组分组合预报可以显著改善极移的中长期(30--365d)预报精度, 与国际地球自转和参考系服务局(International Earth Rotation and Reference Systems Service, IERS)提供的A公报中的极移预报值相比, SSA方法对极移PMX分量(本初子午线方向)和PMY分量(西90$^\circ$子午线方向)的中长期预报精度改进最高分别可达45.97%和62.44%. 研究结果验证了SSA方法对极移中长期预报改进的有效性.     

Satellite-derived rainfall thresholds for landslide early warning in Bogowonto Catchment,Central Java,Indonesia

Satellite rainfall products for landslide early warning prediction have been spotlighted by several researchers, in the last couple of decades. This study investigates the use of TRMM and ERA-Interim data, for the determination of rainfall thresholds and the prediction of precipitation, respectively, to be used for landslide early warning purposes at the Bogowonto catchment, Central Java, Indonesia. A landslide inventory of 218 landslides for the period of 2003–2016 was compiled, and rainfall data were retrieved for the landslide locations, as given by 6 ground stations, TRMM, and ERA-Interim data. First, rainfall data from the three different sources was compared in terms of correlation and extreme precipitation indices. Second, a procedure for the calculation of rainfall thresholds for landslide occurrence was followed consisting of four steps: i) the TRMM-based rainfall data was reconstructed for selected dates and locations characterized by landslide occurrence and non-occurrence; ii) the antecedent daily rainfall was calculated for 3, 5, 10, 15, 20 and 30 days for the selected dates and locations; iii) two-parameter daily rainfall-antecedent rainfall thresholds were calculated for the aforementioned dates; after analysis of the curves the optimum number of antecedent rainfall days was selected; and (iv) empirical rainfall thresholds for landslide occurrence were determined. The procedure was repeated for the entire landslide dataset, differentiating between forested and built-up areas, and between landslide occurrence in four temporal periods, in relation to the monsoon. The results indicated that TRMM performs well for the detection of very heavy precipitation and can be used to indicate the extreme rainfall events that trigger landslides. On the contrary, as ERA-Interim failed to detect those events, its applicability for LEWS remains limited. The 15-day antecedent rainfall was indicated to mostly affect the landslide occurrence in the area. The rainfall thresholds vary for forested and built-up areas, as well as for the beginning, middle and end of the rainy season.     

中国大陆结构地震反应观测系统布设研究

本文简要介绍了结构地震反应观测研究的意义。并以中国地震局防灾大楼和北京市人大办公大楼结构地震反应观测系统为布设实例,阐述了中国大陆地区结构地震反应观测系统的两种布设方式。对两种方式进行了分析,指出简化布设中存在的问题,并提出了布设原则,用于指导结构地震反应观测系统的布设。     

Studying Resource-Dependent Communities Through a Social-Ecological Lens? Examining Complementarity with Existing Research Traditions in Canada

This article explores the suitability of Ostrom and colleagues' social-ecological systems framework (SESF) for the study of resource-dependent communities in Canada. Through a broad literature about resource-dependent communities in Canada, three main approaches are identified, named staples research, rural development, and sustainability studies. Each of these research traditions is analyzed with regards to a common set of criteria – focus, scale, methods, treatment of institutions, and treatment of environmental dimensions. Research in each category is compared and contrasted with the SESF approach, to identify areas of overlap and divergence. Results indicate that the SESF is unlikely to provide additional benefit in terms of in-depth of social analysis, however, it does provide a unique contribution in terms of its coupled approach to conceiving social and ecological systems and its ability to operationalize these relationships through structured variables.     

Strain analysis of a seismically imaged mass‐transport complex,offshore Uruguay

Strain style, magnitude and distribution within mass‐transport complexes (MTCs) are important for understanding the process evolution of submarine mass flows and for estimating their runout distances. Structural restoration and quantification of strain in gravitationally driven passive margins have been shown to approximately balance between updip extensional and downdip contractional domains; such an exercise has not yet been attempted for MTCs. We here interpret and structurally restore a shallowly buried (c. 1,500 mbsf) and well‐imaged MTC, offshore Uruguay using a high‐resolution (12.5 m vertical and 15 × 12.5 m horizontal resolution) three‐dimensional seismic‐reflection survey. This allows us to characterise and quantify vertical and lateral strain distribution within the deposit. Detailed seismic mapping and attribute analysis shows that the MTC is characterised by a complicated array of kinematic indicators, which vary spatially in style and concentration. Seismic‐attribute extractions reveal several previously undocumented fabrics preserved in the MTC, including internal shearing in the form of sub‐orthogonal shear zones, and fold‐thrust systems within the basal shear zone beneath rafted‐blocks. These features suggest multiple transport directions and phases of flow during emplacement. The MTC is characterised by a broadly tripartite strain distribution, with extensional (e.g. normal faults), translational and contractional (e.g. folds and thrusts) domains, along with a radial frontally emergent zone. We also show how strain is preferentially concentrated around intra‐MTC rafted‐blocks due to their kinematic interactions with the underlying basal shear zone. Overall, and even when volume loss within the frontally emergent zone is included, a strain difference between extension (1.6–1.9 km) and contraction (6.7–7.3 km) is calculated. We attribute this to a combination of distributed, sub‐seismic, ‘cryptic’ strain, likely related to de‐watering, grain‐scale deformation and related changes in bulk sediment volume. This work has implications for assessing MTCs strain distribution and provides a practical approach for evaluating structural interpretations within such deposits.     

Retrieving volume FeO and TiO_2 abundances of lunar regolith with CE-2 CELMS data using BPNN method

The volume FeO and TiO_2 abundances(FTAs) of lunar regolith can be more important for understanding the geological evolution of the Moon compared to the optical and gamma-ray results. In this paper, the volume FTAs are retrieved with microwave sounder(CELMS) data from the Chang'E-2 satellite using the back propagation neural network(BPNN) method. Firstly, a three-layered BPNN network with five-dimensional input is constructed by taking nonlinearity into account. Then, the brightness temperature(TB) and surface slope are set as the inputs and the volume FTAs are set as the outputs of the BPNN network.Thereafter, the BPNN network is trained with the corresponding parameters collected from Apollo, Luna,and Surveyor missions. Finally, the volume FTAs are retrieved with the trained BPNN network using the four-channel TBderived from the CELMS data and the surface slope estimated from Lunar Orbiter Laser Altimeter(LOLA) data. The rationality of the retrieved FTAs is verified by comparing with the Clementine UV-VIS results and Lunar Prospector(LP) GRS results. The retrieved volume FTAs enable us to re-evaluate the geological features of the lunar surface. Several important results are as follows. Firstly, very-low-Ti(<1.5 wt.%) basalts are the most spatially abundant, and the surfaces with TiO_2> 5 wt.% constitute less than 10% of the maria. Also, two linear relationships occur between the FeO abundance(FA) and the TiO_2 abundance before and after the threshold, 16 wt.% for FA. Secondly, a new perspective on mare volcanism is derived with the volume FTAs in several important mare basins, although this conclusion should be verified with more sources of data. Thirdly, FTAs in the lunar regolith change with depth to the uppermost surface,and the change is complex over the lunar surface. Finally, the distribution of volume FTAs hints that the highlands crust is probably homogeneous, at least in terms of the microwave thermophysical parameters.     

Farmer-based Rice Cropping Systems in the Poyang Lake Region,China: Analysis of Characteristics and Policy Implications

This paper examines the spatial characteristics of farmer/household behaviors in regional rice cropping systems (RCS), and the results provide necessary information for developing strategies that will maintain regional food security. Through field study and statistical analysis based on 402 households questionnaires finished in 2014-2015 in the Poyang Lake Region (PLR) of China, we arrived at two main conclusions. First, single- and double cropping rice were found across the study area, but showed a general distribution trend, with double cropping rice in the southeast part (especially in Jinxian county) and single cropping rice in the northwest (particularly in De’an county). Second, the household decisions concerning RCS varied in different parts of the PLR, but double cropping was the dominant type, with about 63.57% of the respondent households in the PLR cultivating double cropping rice. However, the multiple-cropping index of paddy rice was only 1.55. About 3% of interviewed households had altered their RCS during this period. Based on these findings, the local governments should guide farmers’ paddy field cultivation behaviors by increasing the comparative efficiency of rice production, promoting appropriate scale operations and land conversion, as well as optimizing rice growing conditions to improve the multiple cropping index and enhance food provision. Finally, land-use efficiency and more sustainable use of land resources should be improved.     

A comparative analysis of gridding systems for point-based land cover/use analysis

For spatial analyses, raster land cover/use maps are converted into points, where each point holds attribute of its corresponding land cover/use. However, these are not identical in terms of areas or shapes; thus assigning a point to each isolated shape is not an adequate solution and for that gridding is suggested. Square, hexagon and triangle are among the basic land use gridding systems where each of them has its own advantages in such process. This research aims to compare the systems in providing accurate representations of the original land cover/use maps, assess the data loss while increasing resolution and suggest suitable gridding system. The research finds the errors in area and feature numbers as criteria for selected classes. Modules that find out errors in each scale considering each criterion and class alone are proposed. The modules suggest both the best system for each criterion alone and for combined criteria.     

基于情境感知和序列模式挖掘的气象学习资源推荐算法

随着互联网的快速发展,气象部门职工作为学习者可以获得的学习资源得到极大丰富。信息超载导致检索合适的在线学习资源时遇到了困难;学习者在不同学习环境和序列访问模式上也有不同的学习需求。但是,现有的推荐系统,如基于内容的推荐和协同过滤,没有结合学习者的情境和序列访问模式,推荐结果准确度不高。本文提出了一种结合情境感知、序列模式挖掘和协同过滤算法的混合推荐算法来为学习者推荐学习资源。混合推荐算法中,情境感知被用来整合学习者的情境信息,如知识水平和学习目标;序列模式挖掘被用来对网络日志进行挖掘,发现学习者的序列访问模式;协同过滤被用来根据学习者的情境数据和序列访问模式为目标学习者计算预测并生成建议。实验和应用效果表明,该混合推荐算法推荐的质量和准确性方面优于其他推荐算法。     

Soft computing approach for real-time estimation of missing wave heights

This paper presents soft computing approach for estimation of missing wave heights at a particular location on a real-time basis using wave heights at other locations. Six such buoy networks are developed in Eastern Gulf of Mexico using soft computing techniques of Artificial Neural Networks (ANN) and Genetic Programming (GP). Wave heights at five stations are used to estimate wave height at the sixth station. Though ANN is now an established tool in time series analysis, use of GP in the field of time series forecasting/analysis particularly in the area of Ocean Engineering is relatively new and needs to be explored further. Both ANN and GP approach perform well in terms of accuracy of estimation as evident from values of various statistical parameters employed. The GP models work better in case of extreme events. Results of both approaches are also compared with the performance of large-scale continuous wave modeling/forecasting system WAVEWATCH III. The models are also applied on real time basis for 3 months in the year 2007. A software is developed using evolved GP codes (C++) as back end with Visual Basic as the Front End tool for real-time application of wave estimation model.