深水压力舱密封技术研究

管道屈曲技术试验过程当中,发现深水压力舱的出厂自带密封工艺耗时过长、密封效果不好、安全性不佳、返工现象普遍.针对这一现象,采用全新的密封工艺流程与方法:在前期处理中对螺柱编号与清理以防止螺母安装过程中的卡死现象;采用自创的精度控制方法防止漏水以及返工;根据不同的工作压力对密封技术进行梯度划分,选取不同的密封方案.经过实...     

石榴石橄榄岩的熔融实验及其地质意义

在20×10~9Pa和25×10~9Pa条件下,对石榴石橄榄岩进行的14次高温高压熔融实验研究表明,在1600℃时石榴石橄榄岩开始熔融(初熔),熔体中的SiO_2>70％,Na_2O+K_2O>8％,类似于A型花岗岩成分。本实验为地幔花岗岩的成因提供了证据。     

Experimental Study on Friction Coefficient Between Concrete and the Top Surface of Rubble Mound Foundation

Experimental studies on the friction coefficient between concrete and the top surface of a rubble mound foundation in China are reviewed. Through comparison of different test results, the development of this research is comprehensively analyzed. An experiment is carried out in the condition similar to prototype. The process curve of friction coefficient with the test block sliding is analyzed and a standard for determination of the friction coetfficient is defined. The variation features of the friction coefficient are analyzed on the basis of the present experimental results and other studies in China. It is shown that the friction coettfficient between concrete and the top surface of a rubble mound foundation decreases with the increase of the foundation pressure, and the friction coettqcient for a very fine leveling bed is smaller than that for a fine leveling bed.     

Plastic buckling of ring-stiffened conical shells under external hydrostatic pressure

The paper describes experimental tests carried out on three ring-stiffened cones that were tested to destruction under external hydrostatic pressure. The cones were carefully machined from EN1A Steel. All three cones failed by plastic non-symmetric bifurcation buckling in a mode commonly known as general instability. In this mode the entire ring-shell combination buckles bodily.The paper also provides a design chart using the results obtained from these three vessels, together with the results of six other vessels obtained from other tests. The design chart allows the possibility of obtaining a plastic knock down factor, so that the theoretical buckling pressures, based on elastic theory, can be divided by the plastic knockdown factor, to give the predicted buckling pressure. This method can also be used for the design of full-scale vessels.     

Dynamic analysis of a vertical plate exposed to breaking wave impact

From the experimental studies in recent years, it has become known that when a wave breaks directly on a vertical faced coastal structure, high magnitude impact pressures are produced. The theoretical and experimental studies show that the dynamic response of such structures under wave impact loading is closely dependent on the magnitude and duration of the load history. The dynamic analysis and design of a coastal structure can be succeeded provided the design load history for the wave impact is available. Since these types of data are very scarce, it is much more convenient to follow a method which is based on static analysis for the dynamic design procedure. Therefore, to facilitate the dynamic design of a vertical plate that is exposed to breaking wave impact, a multiplication factor called “dynamic magnification factor” is herein presented which is defined as the ratio of the maximum value of the dynamic response to that found by static analysis. The computational results of the present study show that the dynamic magnification factor is a useful ratio to transfer the results of static analysis to the dynamic design of a coastal plate for the maximum impact pressure conditions of p_max/γH₀≤18.     

风浪背景下舰船水压场信号的自适应AR模型预测滤波

为了有效地从风浪背景中检测舰船水压信号,首先根据舰船水压信号和波浪噪声的特点以时间序列的AR模型理论为依据,导出一种便于实现的自适应滤波器结构,并用NFTF自适应算法实现对舰船水压信号的预测滤波,取得了明显的效果.计算机仿真实验结果表明,给出的方法对抗波浪干扰具有良好的性能.     

The buckling of plastic oblate hemi-ellipsoidal dome shells under external hydrostatic pressure

The paper presents a theoretical and an experimental investigation into the buckling of seven oblate hemi-ellipsoidal dome shells under external hydrostatic pressure. Four of the shells were made in glass reinforced plastic and three were made from a thermosetting plastic called solid urethane plastic. All the vessels were tested to destruction. The theoretical study was made with the aid of a non-linear finite element solution, where both geometrical and material non-linearity were allowed for. Good agreement was found between experiment and theory for all the vessels. The very oblate domes failed axisymmetrically. Theoretical convergence was good for the more oblate domes but it was not as good as for the less oblate domes. This may have been because the less oblate domes did not fail in a classical axisymmetric manner as was expected. This work is of much importance in ocean engineering.     

北部湾地区不同相对密度的海砂力学特性分析

为探究相对密度和有效围压对饱和海砂力学特性的影响,利用GDS动态三轴试验仪,对广西北部湾地区海砂开展了一系列固结排水三轴剪切试验,分析了相对密度、有效围压对饱和海砂强度特征、体变特征、割线模量以及摩擦角的影响规律。结果表明：随着围压的减小或相对密度的增大,试样体积应变不断增大,而相对密度或有效围压的增加均会提高试样的峰值强度,有效围压与峰值强度之间呈现良好的线性增长关系。随着围压的减小或相对密度的增大,应力相对软化系数、剪胀系数均不断增大,且有效围压与应力相对软化系数、剪胀系数分别呈线性和半对数线性相关。割线模量随轴向应变的增加整体呈衰减趋势,各试验工况下轴向应变为5%时试样的割线模量相比于轴向应变0.164%衰减了80%~90%。饱和海砂的峰值摩擦角随相对密度的增加而增大,随有效围压的增大而减小,相对密度D_r为50%时有效围压σ_c为50 kPa对应的峰值摩擦角是σ_c为200 kPa的1.098倍。     

云南蒙自五里冲水库岩溶及其工程处理

五里冲水库个旧组（T2^cg)灰岩，岩溶极其发育，其中尤以洼地深、峰丛高、溶洞多又大，地下河管道单一较长、岩溶总体发育历史悠久为特点，以更新世以来岩溶最为发育，现今地下河管道主要形成于晚更新世至今。因区域地壳持续抬升，岩溶没有成层发育的规律，但自上向下递减现象明显。工程上五里冲水库是以帷幕高压灌浆技术为主辅以其它多种方法处理溶洞及封堵地下河，利用天然盲谷成库的一座无大坝中型水库。帷幕高压灌浆技术先、便捷、可靠。水库蓄水己达设计水位，发挥了效益。一年可向蒙自县供水8161万m^3，可增加灌溉面积10万亩，改善灌溉2.3万亩，向城市及工业供水1210万m^3，使蒙自水利化程度由37%提高到70%以上。     

天然高压矿物研究的新进展及其在地幔矿物学中的意义

对地表陨石坑岩石和陨石的冲击变质效应的研究, 是以往发现天然高压矿物的主要途径。α-PbO2 超斯石英、(Na,K,Ca)AlSi3O8-锰钡矿以及磷灰石高压同质多像变体等是几个近期在陨石中发现的天然高压相,这些高压相很可能存在于地幔之中。天然高压矿物的发现对地幔矿物学研究和发展起了推动作用。