导线测角精度超限问题的探讨

利用实例阐述了一、二级导线测量严密平差后，测角中误差超限问题，根据《规范》精度指标，分析了测角中误差超限的原因；提出一、二级导线测量严密平差后，没边、测角中误差限值的建议。     

宽观测带SAR图像入射角效应量化研究与校正

针对宽观测带SAR图像,在对入射角效应量化研究的基础上,提出了一种入射角效应按类校正方法。利用分水岭分割和区域标记技术实现地物取样,基于结合线性回归估计的余弦朗伯定律,实现对地物后向散射值的按类辐射校正。针对Envisat ASAR C波段HH极化数据的实验结果表明,入射角效应对雷达后向散射有明显的影响,含水量越高的地物类型,入射角效应越明显。利用本文方法进行入射角效应校正的效果优于绝对定标和一阶余弦校正的效果。     

Effect of sampling and linkage on fault length and length–displacement relationship

The power-law exponent (n) in the equation: D=cL ⁿ , with D = maximum displacement and L = fault length, would be affected by deviations of fault trace length. (1) Assuming n=1, numerical simulations on the effect of sampling and linkage on fault length and length–displacement relationship are done in this paper. The results show that: (a) uniform relative deviations, which means all faults within a dataset have the same relative deviation, do not affect the value of n; (b) deviations of the fault length due to unresolved fault tip decrease the values of n and the deviations of n increase with the increasing length deviations; (c) fault linkage and observed dimensions either increase or decrease the value of n depending on the distribution of deviations within a dataset; (d) mixed deviations of the fault lengths are either negative or positive and cause the values of n to either decrease or increase; (e) a dataset combined from two or more datasets with different values of c and orders of magnitude also cause the values of n to deviate. (2) Data including 19 datasets and spanning more than eight orders of fault length magnitudes (10⁻²–10⁵ m) collected from the published literature indicate that the values of n range from 0.55 to 1.5, the average value being 1.0813, and the peak value of n _d (double regression) is 1.0–1.1. Based on above results from the simulations and published data, we propose that the relationship between the maximum displacement and fault length in a single tectonic environment with uniform mechanical properties is linear, and the value of n deviated from 1 is mainly caused by the sampling and linkage effects.     

A surface complexation model for cadmium and lead adsorption onto diatom surface

This work is devoted to the physico-chemical study of cadmium and lead interaction with diatom–water interfaces for two marine planktonic (Thalassiosira weissflogii = TW, Skeletonema costatum = SC) and two freshwater periphytic species (Achnanthidium minutissimum = AMIN, Navicula minima = NMIN) by combining adsorption measurements with surface complexation modeling. Reversible adsorption experiments were performed at 20 °C after 3 h of exposure as a function of pH, metal concentration in solution, and ionic strength. While the shape of pH-dependent adsorption edge is similar among all four diatom species, the constant-pH adsorption isotherm and maximal binding capacities differ. These observations allowed us to construct a surface complexation model for cadmium and lead binding by diatom surfaces that postulates the constant capacitance of the electric double layer and considers Cd and Pb complexation with mainly carboxylic and, partially, silanol groups. Parameters of this model are in agreement with previous acid–base titration results and allow quantitative reproduction of all adsorption experiments.     

Site effects at Euroseistest—I. Determination of the valley structure and confrontation of observations with 1D analysis

This paper describes the process of construction of the 2D model of Volvi's geological structure and results of empirical and theoretical approaches to the evaluation of site response at Euroseistest. The construction of the 2D model is based on a re-interpretation of the available geophysical and geotechnical data in an effort to improve the definition of the subsoil structure at Euroseistest in terms of the most important parameters needed to model site response. The results of this re-interpretation are compared with a previous published 2D model of the same alluvial valley. Different analysis of the measurements and different criteria in the synthesis of data have led to a different model, even if both studies had access to the same field measurements. This underscores the fact that a model results of an interpretation and is not uniquely determined by the data, no matter how detailed they are. The well known subsoil structure opened the possibility to correlate the geometry and the dynamic properties of the 2D model with the results of site response determined from a detailed analysis of two events in frequency and time domains and 1D numerical modeling. The study of site response shows the important effect of the lateral variations on the ground motion and suggests that the contribution of locally generated surface waves to the resonant peak may be important. In the case of Volvi's graben, the limitations of the 1D approximation to simulate ground motion under complex soil conditions in both frequency and time domains are also shown. This paper lays the ground for a companion article dealing with 2D site effects in this basin.     

1999年台湾集集地震震源破裂过程

使用GPS同震位移资料和远场P波记录,研究了1999年台湾集集地震震源破裂过程．根据地质构造和余震分布引入了一个由弯曲断层面构造的三段“铲状”断层模型．在使用静态GPS位移资料反演集集地震的断层破裂滑动分布时,由于集集地震断层北部近地表破裂的复杂性,在位错模型中考虑拉张分量对地表同震位移的贡献,可更好地同时拟合GPS观测资料的水平和垂向分量．而纯剪切位错弹性半空间模型和分层地壳模型都无法同时拟合水平和垂向GPS观测资料．在此基础上,同时使用静力学同震位移资料和远场地震波形记录,反演集集地震的震源破裂过程．结果表明,一种垂直于断层面的“挤压性”(负)拉张分量几乎集中分布于地震断层的浅部和北部转折处,而这一带地表破裂远较没有(负)拉张分量出现的南部断层复杂．“冒起构造”的数字模拟表明,这种在集集地震破裂转折处及北部断裂带广为出现的典型破裂造成的地表位移可以用具有负拉张分量(挤压)的逆冲断层更好地模拟．而这种负拉张分量(挤压)的分布正是地震破裂性质和几何复杂性的综合反映,震源破裂过程也显示北部转折处破裂在空间和时间上的复杂性.高滑区域与余震分布表现为负相关.     

多核并行环境中矢量数据格式的转换算法

针对目前对VCT格式转换的并行算法研究较少的现状,该文以VCT向shapefile格式转换为例,探索多核并行环境中进行VCT格式向其他矢量数据格式快速转换的方法:在深入探索VCT与shapefile格式特点的基础上,通过构建索引、数据解析转换,完成由VCT向shapefile格式的转换;并设计出一种顾及负载均衡的数据划分方法,通过评估不同类型图层的复杂度实现不同类型矢量数据的均衡划分,实现了VCT向shapefile格式转换的并行算法。最后利用某地土地利用VCT文件进行算法测试,结果表明该算法转换结果正确,取得了良好的加速比,并基本达到负载均衡。     

Interpretation of charging on fracture or frictional slip surface of rocks

Fracturing and frictional sliding of quartz and granite under dry condition generates fractoluminescence, charged particle emission and electromagnetic radiation. Various kinds of experiments indicate that surface charge density on fracture or frictional slip surface of quartz and granite is 10⁻⁴ to 10⁻² C/m² which is larger than bound charges induced by the disappearance of piezoelectricity due to the release of stress. Hole and electron trapping centers, which is found in semiconductor devices with the Si–SiO₂ system, are causes of surface charging on fracture or frictional slip surface of quartz crystal. The quantity of the surface charge is enough to cause corona discharge that can generate earthquake lights. The mechanism considering the hole and electron trapping centers has a probability to explain why non-piezoelectric minerals or rocks generate electromagnetic phenomena. It can be one of origins of seismo-electromagnetic phenomena (SEP).     

地形面方法在渭河盆地活断层研究中的应用

本文主要依据地形图和航空照片解译，并经已有地质、钻孔资料验证及野外实地考察的方法来研究地形面及其变形特征，由此确定渭河盆地活断层的分布、最新活动特征及活动规律，为地震预报及地震危险性分析提供依据。     

REVIEWS OF GEOGRAPHIC SOFTWARE

Geographic Software Reviewed in this article: LIFE TABLES and the LESLIE MATRIX. CONDUIT MENTMAP2 . Lawrence W. Carstensen Jr . PC-MATLAB , Version 1.0. The Math Works, Inc. QUICKMAP , version 1.0. Sammamish Data Systems, Inc. SYSTAT: THE SYSTEM FOR STATISTICS , Version 2.1, Systat Inc. USA DISPLAY . Instant Tecall