Surface sensible heat flux over a deep moist convective region and its interplay with synoptic and mesoscale features

The surface parameters are being evaluated using a methodology which considers the vertical temperature structure of MONTBLEX ’90. For this 30 metre micrometeorological tower data are utilised. In this process, a concept of isolated layers has been introduced. The parameters have been evaluated following two successive iterative processes to give a consistent value both in the flux-profile relation and the related similarity relation. The heat flux obtained using the present methodology, is then utilised to examine its interplay with the synoptic as well as mesoscale features. The existence of such an interplay is observed.     

青藏高原地区地表及行星反射率

文章讨论了利用ISCCP卫星观测资料确定青藏高原地区地表反射率的方法，在无积雪地区和季节，地表反射率可以ISCCP可见光反射率为基础，在模式计算过程中，假定紫外反射率以及红外与可见光反射率的比值分别为常数。敏感性试验表明，由这两个假设所产生的误差并不显著。在有积雪地区或季节，地表平均反射率可直接由ISCCP可见光反射率表示。试验结果与地面实际观测作了比较，除沙漠区外，两者比较一致。文中还计算了高原晴天行星反射率。经与ERBE卫星观测比较，发现从5月至9月高原周围沙漠区气溶胶对辐射平衡有较显著的影响。而在其     

Species Composition and Some Ecological Notes on Diatom Communities of a Lotic Environment in Tarhunãh,Libya Artenzusammensetzung und einige ökologische Notizen über Diatomeengesellschaften eines lotischen Biotops in Tarhunãh/Libyen

Libya occupies a large part of the Sahara Desert, and is a predominantly arid country with extremely scarce freshwaters. Despite aridity, a distinct higher rainfall zone exists along its mediterranean coastal belt. A lotic environment (perennial stream) in Ain-Scersciara, Tarhunãh in northwest Libya was studied for the species composition of diatom communities and their ecological characteristics. The waters are generally alkaline (pH = 7.5) and of hard-water (conductivity = 2008 μS/cm) type. The epiphytic diatom growth on benthic filamentous algae was high (32 taxa) with Amphora veneta as a very common taxon. Gomphonema parvulum var. micropus was an important taxon found in scrapings from the leaves of macrophytes and stony substratum. Nitzschia and Navicula showed high species richness (9 taxa in each) followed by Gomphonema (6 taxa). The ecological attributes of the majority of taxa show an oligohalobe status and alkaliphilous indicator.     

Surface sealing as influenced by slope angle and position of simulated stones in the top layer of loose sediments

The influence of five different slope angles and two different positions of simulated stones in the top layer of a sandy and a silty sediment on surface sealing intensity is examined in the laboratory. Sealing intensity is assessed by studying changes of percolation rate through a sediment layer with simulated rainfall duration and by measuring cohesion of the 5 mm thick upper sediment layer, a measure of seal strength, by means of a torvane. Slope has a negative influence on sealing intensity. For a constant per cent of simulated stone cover, sealing intensity is lowest in the case of stones placed on the sediment surface compared to the case of stones pushed into the surface layer. Explanations for these findings are given and some implications are further discussed.     

A new technique for determining the surface level of salt marshes and other uncompacted sedimentary environments

The method described involves the use of an electro-optical distance measurer mounted on a theodolite. Observations are taken onto a series of acrylic reflectors, aligned at right angles to the line of sight, and slope distances and vertical and horizontal angles are recorded. From these data it is possible to obtain surface heights to an accuracy of ±0·5 cm at 200 m and to avoid any direct disturbance of the site under investigation.     

Growth Of The Summer Daytime Convective Boundary Layer At Anand

The heights of the daytime convective boundary layer (CBL), computed by a one-dimensional model for a bare soil surface at a semi-arid station,Anand, during the dry and hot summer month of May 1997, are presented. As input, the model requires surface heat flux, friction velocity and air temperature as functions of time. Temperature data at the one-metre level from a tower and sonic anemometer data at 9.5 m collected during the period 13–17 May 1997 in the Land Surface Processes Experiment (LASPEX-97) are used to compute hourly values of surface heat flux, friction velocity and Obukhov length following the operational method suggested by Holtslag and Van Ulden [J. Climate Appl. Meteorol. 22,517–529 (1983)]. The model has been tested with different values for the potential temperature gradient ( ) above the inversion. The model-estimated CBL heights comparefavourably with observed heights obtained from radiosonde ascents.     

永平水泄铜钴矿控矿因素

水泄铜钴矿区地质条件较为复杂,控矿因素较多,通过分析认为主要受断层及岩性控制,地层初始富集,构造及区域变质作用提供通道及热源。水的循环、溶解作用形成热卤水成矿。     

A new fault rupture scenario for the 2003 Mw 6.6 Bam earthquake, SE Iran: Insights from the high-resolution QuickBird imagery and field observations

The December 26, 2003 M_w 6.6 Bam earthquake is one of the most disastrous earthquakes in Iran. QuickBird panchromatic and multispectral satellite imagery with 61 cm and 2.4 m ground resolution, respectively provide new insights into the surface rupturing process associated with this earthquake. The results indicate that this earthquake produced a 2–5 km-wide surface rupture zone with a complex geometric pattern. A 10-km-long surface rupture zone developed along the pre-existing Bam fault trace. Two additional surface rupture zones, each 2–5 km long, are oblique to the pre-existing Bam fault in angles of 20–35°. An analysis of geometric and geomorphic features also shows that movement on the Bam fault is mainly right-lateral motion with some compressional component. This interpretation is consistent with field investigations, analysis of aftershocks as well as teleseismic inversion. Therefore, we suggest that the 2003 Bam earthquake occurred on the Bam fault, and that the surface ruptures oblique to the Bam fault are caused by secondary faulting such as synthetic shears (Reidel shears). Our fault model for the Bam earthquake provides a new tectonic scenario for explaining complex surface deformations associated with the Bam earthquake.     

Application of the normalized surface magnetic charge model to UXO discrimination in cases with overlapping signals

This paper presents an application of the normalized surface magnetic charge (NSMC) model to discriminate objects of interest, such as unexploded ordnance (UXO), from innocuous items in cases when UXO electromagnetic induction (EMI) responses are contaminated by signals from other objects. Over the entire EMI spectrum considered here (tens of Hertz up to several hundreds of kHz), the scattered magnetic field outside the object can be produced mathematically by equivalent magnetic charges. The amplitudes of these charges are determined from measurement data and normalized by the excitation field. The model takes into account the scatterer's heterogeneity and near- and far-field effects. For classification algorithms, the frequency spectrum of the total NSMC is proposed and investigated as a discriminant. The NSMC is combined with the differential evolution (DE) algorithm in a two-step inversion procedure. To illustrate the applicability of the DE–NSMC algorithm, blind test data are processed and analyzed for cases in which signals from nearby objects frequently overlap. The method was highly successful in distinguishing UXO from accompanying clutter.     

2D magnetic resonance tomography applied to karstic conduit imaging

Karstic conduits play a crucial role for water supply in many parts of the world. However, the imaging of such targets is generally a difficult task for most geophysical methods. Magnetic Resonance Sounding (MRS) is a geophysical method designed for imaging of water bearing structures. Initially, MRS was developed for characterizing horizontally stratified aquifers. However, when applying a 1D MRS measuring setup to the imaging of 2D–3D targets, the size of which may be much smaller than the loop, the accuracy and the lateral resolution may not be sufficient. We have studied the possibility of simultaneously processing several MRS aligned along a profile to perform a Magnetic Resonance Tomography (MRT). This work emphasizes the gain of resolution for 2D–3D imagery of MRT versus the interpolation of 1D inversion results of MRS along the same profile. Numerical modelling results show that the MRT response is sensitive to the size and location of the 2D target in the subsurface. Sensitivity studies reveal that by using the coincident transmitting/receiving (TX/RX) setup and shifting the loop around the anomaly area, the depth, section and position of a single karstic conduit with a size smaller than the MRS loop size can be resolved. The accuracy of the results depends on the noise level and signal level, the latter parameter being linked to the depth and volume of the karstic conduit and the water content in the limestone matrix. It was shown that when applying MRT to the localization of 2D anomalies such as karstic conduits, the inclination of the geomagnetic field, the orientation of the MRT profile and the angle of crossover of the conduit by the MRT profile must be taken into account. Otherwise additional errors in interpretation should be expected. A 2D inversion scheme was developed and tested. Both numerical and experimental results confirm the efficiency of the developed approach.