大井铜-锡多金属矿床地质特征及其成因

通过对大井铜-锡多金属矿床成矿地质环境、矿床地质特征以及对岩（矿）石同位素、稀土元素、成矿温度等地球化学和成矿物理化学环境的研究,认为,大井铜-锡多金属矿床为一典型的岩浆热液充填型矿床。与成矿有关的隐伏岩体受深部隐伏的深大断裂控制,可能与黄岗梁矽卡型铁-锡矿床同属一构造岩浆成矿带上不同成矿环境下形成的矿床。并认为,在该成矿带上及大井矿区深部仍有较大的找矿潜力。     

滇西腾冲地区勐连花岗岩体南段LA-ICP-MS 锆石U-Pb定年及其构造意义

高黎贡构造带属于冈底斯地块东缘,滇西高黎贡花岗岩是冈底斯构造活动重要的岩浆记录。对高黎贡构造带的勐连花岗岩体南段的蒲川花岗岩地球化学特征进行的研究表明,蒲川花岗岩主要属于钙碱性-高钾钙碱性花岗岩,并表现出较强的过铝质特点;稀土元素配分模式曲线均表现为向右陡倾的LREE富集模式,具较弱的Eu负异常;花岗岩具后碰撞的特征,形成于主碰撞之后地壳向后碰撞-陆内转换的构造环境。LA-ICP-MS锆石U-Pb定年表明,蒲川花岗岩形成于早白垩世（128.9Ma±2.4Ma）,年龄、地球化学特征与高黎贡构造带北部和中部一致,其形成可能是滇西怒江带碰撞作用的岩浆响应。     

南非主要金矿集区研究现状及存在问题

南非是世界上金矿石资源量最为丰富的国家,其金矿床主要产于东北部地区,主要有三种类型:1赋存于兰德盆地砾岩型建造中的"兰德"砾岩型金矿床,2产在绿岩带中的绿岩带型金矿床,和3主要与白云岩有关的白云岩型金矿床,以前两种类型为主。"兰德"砾岩型金矿床通常品位高,开采规模最大,目前采矿的深度最大,是南非最重要的矿床类型,其矿床成因长期以来存有争议,主要有两种观点,分别是砂矿模式和热液模式,就目前资料来看笔者等认为其代表了两个不同的矿化阶段;绿岩带型金矿床则以巴伯顿地区为代表,矿床具有规模大、易开采等特征,因此在南非金矿床开采中占有重要位置,其矿床主要赋存于石英脉或剪切带中,矿床成因主要有三种,分别是火山成矿模式、转换滑脱构造模式和构造交叉模式。     

金州朝阳断裂带的活动特点与地震

对比研究了金州、朝阳两断裂带的活动特点及分段特征，探讨了断裂带赋存的深部环境与地震孕育，发生的关系。     

武夷地区燕山期成矿特征及找矿方向

武夷及邻区燕山期成矿作用在环太平洋成矿带中具有四大特色：（１）成岩成矿在时空上从陆内向陆缘发展；（２）岩浆成矿作用具多层次造浆与多层次就位成矿；（３）华夏系列多字型复合构造控岩控矿；（４）成岩成矿具北北东向向洋分带与纬向分带叠加的“双向”分带。武夷地区是寻找火山－斑岩铜、金、锡、银铅锌等矿产的重要成矿带，又是找寻动热变质或花岗岩－剪切带型金矿床的有利地带。     

额尔古纳造山带构造演化与成矿作用

额尔古纳造山带属加里东期造山带。因该造山带发育了一系列燕山期铜多金属矿床,并且它位于着名的得尔布干深断裂带的西北侧,故也称为得尔布干成矿带。额尔古纳造山带属西伯利亚板块东南缘加里东期陆缘增生带。形成之后又经历了多期构造运动的改造,特别是燕山期沿得尔布干等北东向深断裂发生了大陆裂谷作用和强烈构造岩浆活动,使之最终形成了一系列不同类型的铜钼矿床和银多金属矿床。这些矿床在空间上构成“三层楼”结构。本文阐明了额尔古纳造山带成矿作用的重要地质因素,表明成矿作用是多期复杂地质构造作用的综合结果。     

Porphyry Copper Deposit Prognosis in the Middle Region of the Bangonghu–Nujiang Metallogenic Belt,Tibet, Using ASTER Remote Sensing Data

The B angonghu–N ujiang metallogenic belt is considered to be T ibet’s third copper belt after the Y ulong and G angdese copper belts. The D uolong gold‐rich porphyry copper deposit, located in the western part of the B angonghu–N ujiang belt was recently recognized as a superlarge prospect. The A dvanced S paceborne T hermal E mission and R eflection R adiometer (ASTER ) was used to characterize the D uolong porphyry deposit alteration area, and three methods, color enhancement, band ratio transformation, and spectral angle mapping, were utilized to extract the phyllic and argillic alteration zones, which are typically considered the most important predictors of porphyry copper. Seven prospecting areas, which match mapped alteration zones, were delineated in the D uolong deposit. In addition, an ASTER image of the eastern region of the B angonghu–N ujiang belt in the X iongmei area was used to extract alteration information, and an area with image characteristics similar to the D uobuza and B olong ore deposits was identified as a prospecting area. Numerous malachite outcrops were identified in the field, and both laboratory analysis and isotopic dating confirmed that the deposit had formed concurrently with the D uobuza deposit (119 M a). Geologic mapping at the 1:5000 scale was conducted in the area, and three types of ore‐bearing rocks were identified, indicating that this area has significant potential to host ore deposits. The discovery of the X iongmei copper mining area is significant for the B angonghu–N ujiang belt.     

Geometry and evolution of superposed folding in the Zawar lead-zinc mineralised belt,Rajasthan

The lead-zinc bearing Proterozoic rocks of Zawar, Rajasthan, show classic development of small-scale structures resulting from superposed folding and ductile shearing. The most penetrative deformation structure noted in the rocks is a schistosity (S ₁) axial planar to a phase of isoclinal folding (F ₁). The lineations which parallel the hinges ofF ₁ folds are deformed by a set of folds (F ₂) having vertical or very steep axial planes. At many places a crenulation cleavage (S ₂) has developed subparallel to the axial planes ofF ₂ folds, particularly in the psammopelitic rocks. The plunge and trend ofF ₂ folds vary widely over the area. Deformation ofF ₂ folds into hook-shaped geometry and development of another set of axial planar crenulation cleavage are the main imprints of the third generation folds (F ₃) in the region. In addition to these, there are at least two other sets of cleavage planes with corresponding folds in small scales. More common among these is a set of recumbent and reclined folds (F ₄), developed on steeply dipping early-formed planes. Kink bands and associated sharp-hinged folds represent the other set (F ₅). Two major refolded folds are recognizable in the map pattern of the Zawar mineralised belt. The larger of the two, the Main Zawar Fold (MZF), shows a broad hook-shaped geometry. The other large-scale structure is the Zawarmala fold, lying south-west of the MZF. Both the major structures show truncation of lithological units along their respective east ‘limbs’, and extreme variation in the width of formations. The MZF is primarily the result of superimposition ofF ₃ onF ₂.F ₁ folds are relatively smaller in scale and are recognizable in the quartzite unit which responded to deformation mainly by buckle shortening. Large-scale pinching-and-swelling that appears in the outcrop pattern seems to be a pre-F₂ feature. The structural evolutionary model worked out to explain the chronology of the deformational features and the large-scale out-crop pattern envisages extreme east-west shortening following formation ofF ₁ structures, resulting in the formation of tight and isoclinal antiforms (F ₂) with pinched-in synforms in between. These latter zones evolved into a number of ductile shear zones (DSZs). The east-west refolding of the large-scaleF ₂ isoclinal antiforms seems to be the consequence of a continuous deformation and resultant migration of folds along the DSZs. The main shear zone which wraps the Zawar folds followed a curved path. Because of the penetrative nature of theF ₂ movement, the early lineations which were at high angles to the later ones (as is evident in the west of Zawarmala), became subparallel to the trend ofF ₂ folding over a large part of the area. Further, the virtually coaxial nature ofF ₂ andF ₃ folds and the refolding ofF ₃ folds by a new set of N-S folds is an indication of continuous progressive deformation.     

Age, distribution, tectonics, and eustatic controls of the Paranense and Caribbean marine transgressions in southern Bolivia and Argentina

Marine transgression onto the South American continent took place at least twice in the Miocene along distinct paleogeographic corridors. The first event occurred between 15 and 13 Ma and the second between 10 and 5? Ma. Each event has particular dominant variables (tectonism, eustacy, sediment accumulation rate) that permitted the preservation of the record and development of the sea on the continent. The 15–13 Ma transgression was tectonically and eustatically controlled, flooding older sedimentary accommodation zones on the South American plate during a global high sea level, whereas the 105? Ma event was predominantly tectonically controlled, generated by tectonic loading created in the Cordillera Oriental fold-and-thrust belt. A new 7.72±0.31 Ma ⁴⁰Ar/³⁹Ar date from the Río Parapetí in Bolivia suggests that the 15–13 Ma transgression registered in Argentina produced no continental connection to the Caribbean transgression, registered in Bolivia, because of temporal constraints.     

华南巨型锑矿带的特征及其制约因素

华南巨型锑矿带位于中国南方扬子陆块与华夏陆块的接合过渡地段,锑矿床都产在沉积地层中,具有显著的层控性,常有整合的层状矿体出现,赋矿地层都显示异常高的锑丰度,充分显示了与沉积盆地演化密不可分的内在联系矿石的硫同位素受赋矿地层层位和沉积相的控制,碳同位素特征反映了深部因素与浅部过程的耦合,铅同位素则暗示研究区地层及其中锑矿化的亲缘关系和统一演化历史．锑是一个趋于在地壳浅部富集的中低温热液成矿元素,因此成熟度越高的地壳块段锑的丰度越高,锑矿产出概率也越大．华南巨型锑矿带的形成乃是扬子陆块南缘沉积盆地长期演化的结果,可能与这一岩石圈块段长期以来强烈的物质分异和再循环有关．