盾构辅助常压开仓技术在南宁地铁隧道中的应用

盾构开仓是盾构隧道施工中难以避免的一道工序,结合南宁地铁四号线总部基地站-飞龙路站区间隧道的盾构开仓实践经验,介绍了素桩加降水这一辅助常压开仓技术在南宁地铁隧道中成功应用的实例。在介绍工程应用背景的基础上,详细叙述了辅助开仓方法中素桩及降水施工的技术要点,可为南宁地区盾构开仓方案选择提供指导,也可为类似条件下盾构开仓方案的选择提供借鉴。     

花岗岩残积土动态冲击性能的SHPB试验研究

为研究花岗岩残积土的动态冲击性能,开展了高速冲击下的分离式霍普金森压杆（SHPB）试验,与常规应变率下的试验结果比较,分析了高应变率对花岗岩残积土的应力?应变特性和强度的影响。结果表明：低、高应变率下的花岗岩残积土的?-?a（轴向应力?轴向应变）曲线均呈现出软化型。随着应变率 增加,?-?a曲线向?a增大的方向移动,破坏应变?af增加。但高应变率下?af增加的程度更加明显。花岗岩残积土的峰值强度普遍具有应变率依赖性,二者可用直线关系拟合,但低、高应变率下的拟合关系并不一致。提出了率敏性因子m定量评价依赖性强弱。研究发现,随着应变率的提高,强度的应变率依赖性减弱,低应变率下的m为26.694,而高应变率下仅为0.013。相关试验结果指出,高速冲击荷载对土体总体有害。工程中应该采取合理措施控制冲击荷载的危害。该研究有助于深化花岗岩残积土动态冲击性能的理解,为相关工程的施工与设计提供技术参考。     

煤体静载破坏微震、电磁辐射及裂纹扩展特征研究

为研究型煤在单轴压缩破裂过程中产生的微震、电磁辐射信号与裂纹演化特征的对应关系,利用自主设计的低噪声静态加载试验系统,对0～0.25、0.25～0.5、0.5～1.0、1～2 mm共4种不同粒度的型煤进行了单轴压缩破坏试验,同步采集了煤样破坏过程中的微震、电磁辐射信号及破坏视频图像,提出了一种煤体裂纹快速提取方法并计算了型煤裂纹面积的变化规律。研究结果表明：型煤在单轴压缩过程中产生的微震、电磁辐射信号及裂纹面积在时域上具有良好的同步性。型煤破坏过程中裂纹面积随时间变化曲线可分为4个阶段。第1阶段为压实阶段,煤样所受应力值较小,其表面的裂纹面积以极为缓慢的速率增加。第2阶段为初始破裂阶段,随着应力的增加和内部弹性势能的积聚,型煤表面裂纹面积的增加速率较压实阶段有明显提高,伴随产生许多细小裂纹。第3阶段为加速破裂阶段,随着应力继续增加以及材料内部积聚弹性能的释放,试样变形过程加速,导致裂纹面积增速进一步增大。第4阶段为卸压阶段,试样的裂纹面积达到最大值,承载能力急剧降低,发生失稳破坏。     

复合载体夯扩桩在邳州地区的应用

介绍了复合载体夯扩桩加固机理、技术特点、适用条件及工艺要求。通过介绍邳州地区地层特点,分析了复合载体夯扩桩技术在邳州地区的应用情况并对工程进行了实例分析,得出进一步推广应用具有广阔的前景。     

Loading protocols for experimental seismic qualification of members in conventional and emerging steel frames

Quasi-static testing is one of the most commonly used experimental methods for examining the seismic performance of structural members. However, consistent loading protocols for experimental seismic qualification of members in emerging steel frames such as self-centering braced frames (SCBFs) as well as in some conventional ones including buckling-restrained braced frames (BRBFs) are still lacking. This paper aims to propose standardized loading protocols based on time-history dynamic analysis on a series of prototype building frames, including steel SCBFs, BRBFs, and moment-resisting frames (MRFs), where both far-field and near-fault earthquakes are considered. The methodology for the development of the loading protocols involves ground motion selection and scaling, design and analysis of prototype buildings, analysis results processing, and rainflow cycle counting, together with extra justification steps. The proposed loading protocols are consistently derived based on the MCE-level seismic hazard and 84^th percentile values of key seismic demand parameters. These parameters are number of damaging cycles N_t, maximum inter-story drift θ_max, inter-story drift range Δθ_i, sum of inter-story drift range ΣΔθ_i, and residual inter-story drift θ_r. The analysis confirms the variations in these seismic demands imposed on the different structural systems under different types of ground motions, highlighting the necessity of developing separate loading protocols for the different cases. The assumptions, decisions, and judgments made during the development of the loading protocols are elaborated, and the conditions and restrictions are outlined. The rationality of the proposed loading protocols is further justified through demonstrating the cumulative distribution function and energy dissipation demand of the systems.     

长江中下游典型浅水湖泊沉积物水界面磷与铁的耦合关系

目前普遍认为磷铁耦合关系是P迁移的主要机制,但大部分研究结果并未提供直接的原位证据.为了探索沉积物剖面磷(P)与铁(Fe)的耦合关系,利用Zr O-Chelex薄膜扩散梯度技术(ZrO-Chelex DGT),分别对太湖、巢湖、鄱阳湖和洞庭湖4个浅水湖泊沉积物有效态Fe和P进行高分辨采样和分析.结果表明,不同湖区有效态Fe和P浓度在沉积物-水界面处开始增加,之后波动变化,垂向异质性较强,但两者浓度变化同步.有效态P和Fe浓度的相关分析结果证明两者浓度具有显著的线性相关.室内厌氧培养实验进一步表明,Fe~(3+)的还原性促使Fe~(2+)与铁结合态磷的释放,促使DGT有效态P与Fe同步变化.该结果表明沉积物P的二次迁移和释放受Fe氧化还原过程的控制,为铁磷耦合关系提供了直接证据.     

Evaluation of force-based and displacement-based out-of-plane seismic assessment methods for unreinforced masonry walls through refined model simulations

The performance of force-based and displacement-based seismic assessment methods for the life-safety limit state check of out-of-plane loaded unreinforced masonry walls is evaluated on the basis of refined numerical simulations. For this purpose, a discrete element model of a vertically spanning wall is built and validated against experimental results from static and dynamic test conditions. The model is then analysed for a large range of wall configurations. For each configuration, a static pushover analysis and a series of incremental dynamic analyses are run, the latter permitting to determine the capacity of the wall under dynamic loading. The accuracy of the assessment methods in predicting the acceleration at which the walls collapse is evaluated. It is found that the displacement-based method is more accurate, robust, and safe than the force-based method. The comparison also shows that for walls characterised by a relatively high ratio of axial load to Euler's critical load, both assessment methods lead to an overestimation of the wall capacity. As a remedy, a modification to the methods based on a recently developed mechanical model is put forward and tested. For the force-based method, it is additionally suggested to set for walls with relatively high overburden ratios the behaviour factor equal to 1. To ensure reproducibility of this study, all input and output files of the numerical simulations are made publicly available.     

机械连接预应力实心方桩承台节点抗震性能试验研究

预应力管桩在高烈度抗震设防地区已禁用,而普通钢筋混凝土方桩成本较高。首先针对卡扣式机械连接预应力混凝土实心方桩、PHC管桩和普通钢筋混凝土方桩与承台处的节点进行拟静力试验,并利用试验数据针对Park-Ang损伤模型进行了修正,进行了损伤指数分析。研究结果表明:预应力方桩比普通钢筋混凝土方桩的抗裂性能明显好,而预应力混凝土实心方桩承台节点耗能能力和延性低于预应力管桩和普通钢筋混凝土方桩;截桩施工导致桩端部损失部分预应力,相比较未截桩试件屈服荷载和极限荷载均减小,节点裂缝开展较早,损伤较未截桩试件严重;增配普通钢筋试件的滞回曲线比较饱满,水平承载能力和位移延性得到提升,节点抗震性能得到提升与改善;预应力混凝土实心方桩损伤前期较小,而一旦发生损伤后,损伤指数发展较快。     

Real-time on-line test for MDOF systems

This paper presents a test system for conducting on-line tests in a real time and a series of real-time on-line tests conducted to verify the effectiveness of the system. The proposed system is characterized by (1) use of a Digital Signal Processor (DSP) now readily available, (2) adoption of the C language to ensure easy programming, and (3) separation of response analysis and displacement signal generation to apply the system for tests with complex structures. To create displacement signals successively without being interrupted by the computation of equations of motion, extrapolation and interpolation procedures using present and past target displacements are developed. Base-isolated building models were chosen for the real-time on-line test. The effectiveness of the extrapolation and interpolation procedures was demonstrated through a series of real-time on-line tests applied to the models treated as SDOF structures. A five-storey base-isolated building model (treated as a six DOF structure) was tested for various ground motions, and it was verified that the system is able to simulate earthquake responses involving large displacements and large velocities. The number of DOFs that can be handled in the proposed system was investigated, and it was found that the system is capable of performing the test with reasonable accuracy for up to 10 DOF structures with a range of response frequency not greater than 3·0 Hz, or 12 DOF structures with a range of response frequency not greater than 2·0 Hz. Copyright © 1999 John Wiley & Sons, Ltd.     

厚垫层-砂桩复合地基现场试验研究

以瓯江北口大桥南锚碇巨型沉井场地地基处理为科研背景,研究厚垫层-砂桩复合地基的适用性及其承载力的影响因素,针对不同的垫层材料、垫层厚度和砂桩间距共进行了9组静载试验。为得到砂桩施工对周围已完成砂桩的影响程度,还进行了砂桩施工相互影响试验。试验结果表明：厚垫层-砂桩加固软土地基效果非常好,是大型沉井地基处理较为理想的方式;垫层含水率、垫层材料和垫层厚度对其承载力的影响程度均大于砂桩间距;砂桩施工过程对周围已完成砂桩的影响和对周围土体的影响具有很大差别,利用传统沉桩挤土理论分析砂桩施工对周围已完成砂桩的影响将产生较大偏差;砂桩施工对周围已完成砂桩会产生较大影响,最大影响范围主要集中在地表以下1/3桩长范围内,影响程度与土层的种类和性质有密切关系,土性越好,影响程度越小;可利用增大砂桩间距和已有砂桩的阻隔效应减小影响程度。