Automatic equipment to monitor groundwater radon

Prototype instrumentation, able to automatically measure groundwater radon content variations, is presented. The equipment is made of stainless steel and has spherical valves with automatic and pneumatic control. The deemanation of the gases from the water is obtained by evacuating a suitable expansion chamber. The instrumentation can make discrete sampling ranging from 1 per hour to 1 per 99 hours. The equipment was tested in the laboratory: the efficiency was measured by means of a²⁶⁶Ra solution. A mean value of (0.65±0.07) count/s/Bq was obtained. A calibration test was carried out by comparing countings from the automatic equipment with those obtained by the standard laboratory cell. Results of an operational check over a period of approximately one year indicate that variations in radon at the calibration site are attributable more to meteorological than to tectonic causes.     

地下水非稳定流的LTFAM算法

渗流域内应用拉普拉斯变换(LT)建立相应的有限分析(FAM)方程,顾及渗流域内地下水流的初始条件和边界条件,可在LT空间构成一个封闭的以水头像函数为变量的线性方程组。将此方程组所得的解,通过Stehfest数值反演公式,可归化为时间域的解(水头)。由于时间t被隐含在数值方程内,从而克服了传统数值法按时段(△t)逐步迭代的缺陷,提高了计算效率,也为用嵌入法建立地下水流管理模型提供了一条捷径。     

论四川盆地三叠系地下水水文地质条件

四川盆地三叠系地下水可划分出碎屑岩孔隙裂隙和碳酸盐岩岩溶裂隙两大储集类型。按此处构造开启程度和埋深条件等的不同,下中三叠统地下水有沉积变质水和渗入淋滤水两种基本成因类型,水动力特征各异。沉积变质水处于深埋封闭条件,受地静压力驱动控制;渗入淋滤水分布于背斜露头区和浅部地区,受静水压力驱动控制。并由此控制了盆地三叠系盐类的保存条件。     

The ＂CO2-rich gas vents＂ of Mt. Amiata volcano （Tuscany, Central Italy）： Geochemistry,genetic mechanism and hazard evaluation

Mt. Amiata （Southern Tuscany, Central Italy） is an extinct Quaternary volcano located in an area still marked by high heat-flow that is caused by deep seated （6-10 km） hot masses related to Pliocene magmatic activity. The anomalous geothermal gradient gives rise, within the Mesozoic limestone formation （Tuscan series）, to geothermal systems that fed the Ca-SO4 thermal springs characterizing this area. Besides of thermal fluids, several cold, dry CO2-rich gas emissions seep out on the NE flank of the volcano. These gas vents mostly consist of large sub-circular craters at variable depth and diameter （5-15 m and 10-50 m, respectively）, and represent a serious hazard for the local population, as testified by the several asphyxia casualties that have been repeatedly occurred within these morphological depressions. In this work, the chemical and isotopic compositions of the Mt. Amiata ＂CO2-rich gas vents＂ and the estimation of both the CO2 flux from the soil and the CO2 distribution in air of their surroundings, has been carried out in order to： （1） assess the origin of gases, （2） recognize the mechanism of formation for these gas emissions and their relationship with local tectonics, and （3） to evaluate the CO2 hazard in the high flux emanations. The chemical composition of the gases is largely dominated by CO2 （up to 98 % by vol） and shows relatively high concentrations of N2, CH4 and H2S （up to 1.1%, 0.9% and 3.9 % by vol, respectively）. These features, coupled with the carbon and nitrogen isotopic signatures, suggest that the origin of the main gas compounds may be related to the contribution of deep （i.e., thermometamorphic processes on carbonate formations for CO2） and shallow （i.e. thermal decomposition of organic material for CH4, N2 and H2S） sources.     

XANES analysis of the mechanisms of arsenic removal in biological iron and manganese treatment unit

Biological iron and manganese removal utilizing indigenous iron and manganese oxidizing bacteria （IRB hereafter） in groundwater can also be applied to arsenic removal according to our pilot-scale test. The arsenic removal probably occurred through sorption and complexation of arsenic to iron and manganese oxides formed by enzymic action of IRB. We investigated the chemical properties of iron and manganese oxides in IRB floc and the valence state of arsenic sorbed to the floc to clarify the mechanisms of the arsenic [especially As （Ⅲ）] removal. The floc samples were collected from two drinking water plants using IRB （Jyoyo and Yamatokoriyama, Japan）, and our pilot - scale test site where arsenic and iron removal using IRB is under way （Mukoh, Japan）. The Jyoyo and Yamatokoriyama IRB floc samples were subjected to As （Ⅲ） and As（Ⅴ） sorption experiments. The elemental composition of the floc samples was measured. XANES spectra were collected on As, Fe and Mn K-edges at synchrotron radiation facility Spring 8 （Hyogo, Japan）. FT-IR and the X-ray diffraction spectra of the samples were also obtained. The IRB floc contained ca. 35 % Fe, 0.3%-3.5% Mn and 2%-6% P. The samples were highly amorphous and contained ferrihidrites and hydrated iron phosphate. According to XANES analyses of IRB, As associated with IRB was in ＋5 valence state when As （Ⅲ） （or As （Ⅴ）） was added in laboratory sorption test, Fe in ＋3 valence state, and Mn a mixture of＋3 and ＋4 valence states. Small shift was observed in the XANES spectra of IRB on As K-edge as the equilibration time of the sorption experiment was increased. Gradual oxidation of a small amount of As （Ⅲ） associated with IRB or change in arsenic binding with sorption site were the probable mechanism.     

Analysis of the effect of geology, soil properties, and land use on groundwater quality using multivariate statistical and GIS methods

The regional survey of groundwater used as a small water supply system was performed to know the effect of geology, soil properties and land use on groundwater quality at Nonsan City, Korea. A total of 126 groundwater samples were collected and analyzed at the study area. The multivariate statistical methods, principal components analysis and discriminant analysis, and GIS technique were used for the quantitative interpretation of groundwater quality. The study area is mainly composed of Precambrian gneiss, Jurassic granite, and Cretaceous volcanics, and metasedimentary rocks of the Ogcheon zone. The land use was grouped as paddy, upland, grassland, resident, point source, industrial area, and water system. The soil properties were classified as 4 major groups, Entisols, Alfisols, Inceptisols, and Ultisols, by the degree of development, and reclassified as 11 subgroups. The modified and simplified geologic map, soil map, and land use map were made by using ARCGIS soft-ware. The area of geology, soil property, and land use affecting the groundwater quality for each well were also calculated by ARCGIS soft-ware to acquire the quantitative parameters for multivariate statistical analysis. The monitoring results of groundwater in the study area showed that 13%-21% of the groundwater samples exceeded the portable water guideline and the main causes were turbidity, bacteria, arsenic and nitrate-N. The spatial distribution of each component showed the close relationship between groundwater quality and geology reflecting the topography, land use.     

Comparative study of sampling methods and in situ and laboratory analysis for shallow-water submarine hydrothermal systems

A primary aim for sampling of submarine hydrothermal vents is to minimize inclusion of ambient seawater. Here, we compare the results of three different sampling methods (air displacement, two-valve bottle, and syringes) for shallow submarine systems. Mixing of hydrothermal fluid with seawater is unavoidable; however, calculations based on linear mixing models allow estimation of the hydrothermal fluid end-member composition. The results show that sampling with a two-valve bottle and syringes are the best options because they allow collection of samples with a large proportion of hydrothermal fluid. Additionally, we compare the results of in situ and laboratory analyses of the fluid samples, and demonstrate that determination of chemical composition in situ is the best option for some components, as re-equilibration affects some component concentrations (i.e. bicarbonate). Conversely, silica determination in situ usually underestimates the concentration in the fluid, as it does not account for polymeric silica. Other components can be measured either in the field or in the laboratory.     

Morphotectonics and incision of the Kaoping submarine canyon, SW Taiwan orogenic wedge

The Kaoping submarine canyon developed on the frontal orogenic wedge off SW Taiwan and is the largest one among others. The canyon begins at the mouth of the Kaoping River, crosses the narrow shelf and broad slope region, and finally merges into the northern Manila Trench for a distance of about 260 km. Using reflection seismic sections and bathymetric mapping this paper reveals the geomorphic characteristics of the Kaoping Canyon strongly related to structural and sedimentary processes. The combined morphometry statistics analysis, seismic interpretations of structures and examinations of detailed bathymetric charts indicate that regional canyon morphology is strongly linked to intrusions of mud diapirs in the upper reach of the canyon and thrust faulting in the middle and lower reaches which produce two prominent morphological breaks of the course of the Kaoping Canyon with two sharp bends. Although excavation of floor and enlargement of the Kaoping Canyon are mainly attributed to downslope erosion of seabed, incision of this canyon is also strongly complicated by mud diapiric intrusions (upper reach), westward thrust faults (middle reach), and regional base level tilting (lower reach). The resultant cross-sectional morphology along the Kaoping Canyon changes considerably, ranging from U-shaped, broad V-shaped, to irregular troughs. The Kaoping Canyon may be served as a variant of canyon model of active margins with a distinct morphology of two sharp bends along the canyon course associated with structure deformation.