柴达木盆地及邻区侏罗纪原型盆地恢复及油气勘探前景

侏罗系是柴达木盆地最重要的源储层系之一。通过野外地质、剖面实测、地震解释、显微构造分析等大量系列资料的综合应用与分析,认为研究区自中生代以来,经历了印支期右行逆冲-走滑构造运动、早—中侏罗世伸展运动、早白垩世北西-南东向挤压及新生代南北向挤压运动,它们与早侏罗世至中侏罗世早期(小煤沟组至大煤沟组)在NE向伸展应力场作用下形成的断陷盆地、中侏罗世晚期至晚侏罗世(彩石岭组—洪水沟组)热力沉降坳陷盆地、早白垩世南北向挤压坳陷盆地密切相关。侏罗纪原型盆地发育三类沉积边界,即盆缘不整合边界(缓坡型和陡坡型边界)、盆内正断层边界、后期逆断层改造边界。不同的现存盆地边界类型对原型盆地恢复的作用不同。侏罗纪盆地以东昆仑构造带为界具有"北陆南洋"的古地理格局,柴达木地区的侏罗纪盆地主要发育在沿岸造山带和岛弧带的山前坳陷以及薄弱的柴北缘加里东俯冲碰撞带之上,形成相对分隔的独立盆地群。柴达木早、中、晚侏罗世原型盆地的分布因受到古特提斯洋向北偏东方向的俯冲作用和阿尔金断裂左旋走滑作用的影响,其沉积中心和沉积范围呈现出从早到晚向东北方向逐渐迁移的规律。早侏罗世盆地的沉积沉降中心主要位于柴北缘西部的冷湖—马海一带,中侏罗世盆地的沉积沉降中心主要位于柴北缘中段的大柴旦—怀头他拉一带,而晚侏罗世盆地的沉积沉降中心主要位于德令哈—乌兰一带。     

Scale effects in food environment research: Implications from assessing socioeconomic dimensions of supermarket accessibility in an eight-county region of South Carolina

Choice of neighborhood scale affects associations between environmental attributes and health-related outcomes. This phenomenon, a part of the modifiable areal unit problem, has been described fully in geography but not as it relates to food environment research. Using two administrative-based geographic boundaries (census tracts and block groups), supermarket geographic measures (density, cumulative opportunity and distance to nearest) were created to examine differences by scale and associations between three common U.S. Census–based socioeconomic status (SES) characteristics (median household income, percentage of population living below poverty and percentage of population with at least a high school education) and a summary neighborhood SES z-score in an eight-county region of South Carolina. General linear mixed-models were used. Overall, both supermarket density and cumulative opportunity were higher when using census tract boundaries compared to block groups. In analytic models, higher median household income was significantly associated with lower neighborhood supermarket density and lower cumulative opportunity using either the census tract or block group boundaries, and neighborhood poverty was positively associated with supermarket density and cumulative opportunity. Both median household income and percent high school education were positively associated with distance to nearest supermarket using either boundary definition, whereas neighborhood poverty had an inverse association. Findings from this study support the premise that supermarket measures can differ by choice of geographic scale and can influence associations between measures. Researchers should consider the most appropriate geographic scale carefully when conducting food environment studies.     

Deep structure of the Amur lithospheric Plate border zone

Based on the study of the deep Amur Plate border structure, seismogravimetric (density) and geoelectric sections of the plate lithosphere crossing geologically and seismically defined plate boundaries are compiled to construct a three-dimensional model of its lithosphere. The model demonstrates the almost ring structure of the plate with its inner part dipping for 50 km and uplifted fringing. The plate boundary zone consists of orogenic belts (Mongol-Okhotsk, Selenga-Stanovoi, Transbaikal, and Sikhote-Alin) and margins of the Siberian and North China platforms. The plate boundaries are described by mantle diapirism models with a largely bilateral inclined dip of its bordering belts.     

Direct finite element method for nonlinear earthquake analysis of concrete dams: Simplification,modeling, and practical application

A direct finite element (FE) method for nonlinear response history analysis of semi-unbounded dam-water-foundation systems has recently been presented. The analysis procedure employs standard viscous-damper absorbing boundaries to model the semi-unbounded foundation and fluid domains and specifies the seismic input as effective earthquake forces—determined from a control motion defined at the foundation surface—at these boundaries. Presented in this paper are several simplifications to this direct FE method that greatly facilitates its implementation in commercial FE software. Also addressed is the modeling of the principal nonlinear mechanisms for concrete dams, calibration of damping in the numerical model to ensure consistency with values measured at actual dams, and practical procedures for implementation of the direct FE method with a commercial FE program.     

颗粒离散单元法动力人工边界设置方法

采用颗粒离散单元法进行动力计算时,人工截断边界上需设置吸收边界条件,以防止波的反射。鉴于颗粒离散单元数值计算模型的人工边界上颗粒单元半径大小不一、边界面凸凹不平,在连续介质的黏性、黏弹性、自由场边界条件方程基础之上,推导出适用于离散介质的等效方程。在离散介质的黏性边界条件等效方程中引入微调系数,提出比值迭代法以快速确定其最优值,以实现对波的最佳吸收。采用二维颗粒离散单元计算软件PFC2D,分别建立黏性、黏弹性、自由场边界条件相关数值分析模型,探讨颗粒分布模式对黏性边界上颗粒单元半径、速度分布及比值迭代过程的影响;采用外源波动算例及经典Lamb问题算例验证黏弹性边界设置方法的正确性;通过隧洞算例检验提出的自由场边界条件设置方法的正确性。     

基于Monte Carlo模拟的三维剖面地质界线不确定性分析

三维剖面地质界线是构建三维地质结构模型的重要基础数据,其不确定性会影响三维模型的几何形态和属性分布。以单一分布为假设前提的统计学不确定性分析方法掩盖了其他概率分布特征对模型的影响。突破单一误差分布条件的假设前提,本文使用Monte Carlo方法模拟了不同概率分布情况下地质剖面数据中地质界线的抽样采集,以及地质界线空间分布的不确定性;依托地质界线空间位置与地质属性的耦合关系,提出了用地质属性概率分布实现地质界线空间不确定性的定量可视化,并结合实际地质剖面探讨了多种概率分布条件下地质界线的空间不确定性。实例研究表明,基于Monte Carlo模拟的不确定性分析方法可以突破单一误差分布假设条件,结合地质属性概率可充分揭示出建模数据的内在不确定性与模型外在要素形态之间的耦合关系。     

Sharp spatially constrained inversion with applications to transient electromagnetic data

Time‐domain electromagnetic data are conveniently inverted by using smoothly varying 1D models with fixed vertical discretization. The vertical smoothness of the obtained models stems from the application of Occam‐type regularization constraints, which are meant to address the ill‐posedness of the problem. An important side effect of such regularization, however, is that horizontal layer boundaries can no longer be accurately reproduced as the model is required to be smooth. This issue can be overcome by inverting for fewer layers with variable thicknesses; nevertheless, to decide on a particular and constant number of layers for the parameterization of a large survey inversion can be equally problematic. Here, we present a focusing regularization technique to obtain the best of both methodologies. The new focusing approach allows for accurate reconstruction of resistivity distributions using a fixed vertical discretization while preserving the capability to reproduce horizontal boundaries. The formulation is flexible and can be coupled with traditional lateral/spatial smoothness constraints in order to resolve interfaces in stratified soils with no additional hypothesis about the number of layers. The method relies on minimizing the number of layers of non‐vanishing resistivity gradient, instead of minimizing the norm of the model variation itself. This approach ensures that the results are consistent with the measured data while favouring, at the same time, the retrieval of horizontal abrupt changes. In addition, the focusing regularization can also be applied in the horizontal direction in order to promote the reconstruction of lateral boundaries such as faults. We present the theoretical framework of our regularization methodology and illustrate its capabilities by means of both synthetic and field data sets. We further demonstrate how the concept has been integrated in our existing spatially constrained inversion formalism and show its application to large‐scale time‐domain electromagnetic data inversions.     

移动荷载下三维半空间动力安定性下限分析

针对交通移动荷载,基于第一动力安定性理论预测了弹塑性半无限空间动力安定性下限值。通过建立无限元边界的三维动力有限元模型,研究了移动荷载作用下弹塑性半无限空间的动应力分布,构造了稳态动应力下的残余应力场,基于残余应力场的构造提出了动力安定性下限值的预测方法,分析了交通动应力下的安定性下限值以及车辆移动速度对安定性的影响,同时分析了均布荷载和Hertz荷载分布对动力安定性下限值的影响。当荷载移动速度低于Rayleigh波速时,安定性极限值随着速度的增加而增加,而当速度超过Rayleigh波速时,随着速度的增加而减小。研究还发现,当荷载和总重相等时采用圆形均布荷载和Hertz荷载的安定性极限值较为相似。     

基于钻孔数据任意边域地层分界面B-Rep建模研究

对相邻钻孔数据的类型进行了分析,对不同连续性和规则性的地层分界面进行了建模.考虑地层分界面的光滑性和整体控制性,运用边界表示法(B-Rep)和B样条曲面重构地层分界面,为地层建模提供了一种新的方法.建模研究表明:在钻孔数据前处理算法的基础上,B-Rep能够建立连续型、非连续型、空洞型等任意边域的地层分界面.     

PAN graphs An aid to GIS analysis

Abstract

Many data structures are possible for the storage of topological information for computer-based maps. The PAN graph is here suggested as an aid in the selection of a strategy appropriate to the application. Examples are given for the mapping of triangular networks and Thiessen polygons. Application of the technique is appropriate to both education in, and design of, spatial data structures for automated cartography and geographical information systems