贵州独山中深盆统不整合的发现及其意义

黔南中泥盆统独山组鸡窝寨段底部存在的古风化壳层和其之上的底砾岩,为一次地亮相对上升、海平面下降的上升运动（独山抬升）,表明独山组内存在着沉积间断。建议将此古风化壳之上的原＂独山组鸡窝寨段＂修订为＂鸡窝寨组＂,代表中泥盆世晚期较独山组更大海侵的以碳酸盐岩为主的沉积。     

天然火山作用探测华北下地壳组成、结构及其形成过程

与中上地壳相比，对下地壳组成、结构的认识受限于样品的获取，然而天然火山作用携带的下地壳捕虏体可以为了解下地壳提供关键样品。华北克拉通是世界上最古老的克拉通之一，显生宙以来的火山作用携带有丰富的下地壳捕虏体，为探测华北下地壳组成、结构及其形成过程提供了可能。通过对这些捕虏体定深、定性及定年的综合研究，构建了以信阳，莒南，汉诺坝和女山等典型地区为代表的下地壳组成、结构剖面模型。这些剖面表明，华北克拉通下地壳具有分层的特点，且上老下新，暗示可能与底侵作用有关。其中捕虏体的锆石U- Pb年龄和Hf同位素的研究，揭示了该克拉通下地壳复杂的形成与演化过程：最古老的组成部分可能老至~4. 0 Ga冥古宙，此后经历了3. 80~3. 65 Ga古太古代的再造作用，2. 8~2. 5 Ga 新太古代和2. 3~1. 8 Ga 古元古代的增生与再造共存，同时还经历了显生宙以来包括462~220 Ma，140~90 Ma和47~45 Ma的增生与再造事件。     

南海海盆区莫霍面分布规律及其对深部钻探的意义

钻遇莫霍面是人类一直以来的梦想。深海海底是地球上离莫霍面最近的地方，目前有研究推测南海是世界上莫霍面深度最浅的海域之一，但缺乏足够的直接证据。深反射地震探测可以直接揭示岩石圈的构造形态，是莫霍面探测的重要手段。本文基于长达15000 km的深反射多道地震剖面的解释、处理、制图和分析，结合前人的研究，形成了南海海盆区莫霍面反射特征和空间分布的初步认识。① 南海东部次海盆南部早期经历了较快速扩张，岩浆供应充足，受扩张停止后岩浆活动影响较小，基底平坦，地质构造相对简单，同时洋壳地震速度结构不存在异常，且有较强的广角莫霍面反射波和可识别的地幔顶部折射波，具备莫霍面钻探的基本条件。② 南海海盆不同区域的莫霍面反射强度存在较大差异。其中东部次海盆莫霍面反射最为强烈且清晰，西北次海盆次之，西南次海盆仅有零星出现的清晰莫霍面反射且可信度不高。③ 识别南海海盆区莫霍面地震反射长度超过3500 km，首次形成了海盆区深度域莫霍面地震反射空间分布图。与重力反演的莫霍面深度相比，利用深反射多道地震计算的莫霍面深度细节更为丰富，并且可以在垂向上清晰刻画莫霍面的结构。整体上，南海海盆区莫霍面地震反射强烈和可信度高的区域中，深度较浅的区域之一是东部次海盆南部，最浅处仅约9. 5 km，其中水深4. 01 km，洋壳厚度仅5. 54 km。综合判断，东部次海盆南部是南海重要的莫霍面钻探备选区，这对南海莫霍面钻探选址具有重要意义。     

High-resolution sequence stratigraphy of the Lower Triassic ‘Buntsandstein’ in the Netherlands and northwestern Germany

Detailed log correlations of the largely fluvio-lacustrine Lower Triassic Buntsandstein (Late Permian-Early Anisian), carried out on 80 wells in the Dutch onshore and offshore areas, can be linked to northwest-German high-resolution sequence stratigraphy. The correlations show that cyclic sedimentation occurred in large parts of the basin. Seven 1st-order sequences are recognised, namely the Main Claystone, Rogenstein, Volpriehausen, Detfurth, Hardegsen, Solling and Lower Röt Sequences. They are overlain by the lower part of the Upper Röt–Lower Muschelkalk Sequence. Distinct sequence boundaries have been identified at the bases of four sequences: Volpriehausen, Detfurth, Solling and Upper Röt. The higher-order sequences consist of fining-upwards cycles with a thickness of up to tens of metres. The sequences are laterally persistent and have a characteristic expression on gamma-ray and sonic logs. In the Lower Buntsandstein, they display a uniform character throughout most of the area, with only minor differences in thickness or lithology. NNE-oriented lows and swells were formed during deposition of the Volpriehausen, Detfurth and Hardegsen Sequences. Uplift prior to the deposition of the Solling Sequence caused deep erosion on the swells in the basin and minor erosion in the lows. The high-resolution sequences probably represent alternating, relatively wet and dry climatic periods, with a periodicity of about 100 000 years. An analysis of the sequences suggests that their reduced thickness on the swells is mainly the effect of erosion. This is supported by analyses of the accumulation patterns and rates.     

Sedimentary Features of Shallow Ancient River Channels on the Northern Shelf of the South China Sea

Quaternary buried ancient river channels are widespread in the shallow-level sediments of the northern shelf of the South China Sea. The sedimentary sequence mainly of fluvial deposits comprise an important component part of the low-stand system tract and transgressive system tract in the study region. The plannar variation and spatial association of the sedimentary features such as incised valley fillings, deltaic foreset wedges and block slides of shelf-marginal fans reflect the palaeogeographic environment during the fall of the regional sea level in the northern part of the South China Sea. Based on the high-resolution seismic reflection data and gelogical data from boreholes, the present paper makes an integrated interpretation of the Quaternary ancient river channels in the shallow sediments of the study area, studies the sedimentary features of the ancient channels such as their spatial distribution, seismic facies reflection indicators, sedimentary facies and sand -body types, and discusses thei     

南极长城站地区现代环境地球化学特征

本文通过环境背景值、风化壳地球化学、对流层(大气气溶胶)地球化学和人为地球化学异常,初步探讨了南极长城站地区的现代环境地球化学特征。分析表明:环境要素固有的地球化学性质、区域环境条件和自然环境演变之间具有深刻的内在联系。     

云南大地热流及地热地质问题

本文报道了云南20多个大地热流测试数据。据热流分布特点并参考前人有关资料,结合地球物理测深资料、岩石热物性与放射性生热率测试数据,对各区地壳深度范围的温度、热流配分组成作了粗略分析,划分出各有特征的若干地质-热流区。云南普遍地热偏高(滇东南小范围除外)的主要原因是新构造运动强烈;怒江以西近代岩浆活动亦强烈,具有典型的板块交汇带的基本地热特点     

Strength and stability of frictional sliding of gabbro gouge at elevated temperatures

To investigate the strength of frictional sliding and stability of mafic lower crust, we conducted experiments on oven-dried gabbro gouge of 1 mm thick sandwiched between country rock pieces (with gouge inclined 35° to the sample axis) at slip rates of 1.22 × 10^− 3 mm/s and 1.22 × 10^− 4 mm/s and elevated temperatures up to 615 °C. Special attention has been paid to whether transition from velocity weakening to velocity strengthening occurs due to the elevation of temperature.Two series of experiments were conducted with normal stresses of 200 MPa and 300 MPa, respectively. For both normal stresses, the friction strengths are comparable at least up to 510 °C, with no significant weakening effect of increasing temperature. Comparison of our results with Byerlee's rule on a strike slip fault with a specific temperature profile in the Zhangbei region of North China shows that the strength given by experiments are around that given by Byerlee's rule and a little greater in the high temperature range.At 200 MPa normal stress, the steady-state rate dependence a − b shows only positive values, probably still in the “run-in” process where velocity strengthening is a common feature. With a normal stress of 300 MPa, the values of steady-state rate dependence decreases systematically with increasing temperature, and stick-slip occurred at 615 °C. Considering the limited displacement, limited normal stress applied and the effect of normal stress for the temperatures above 420 °C, it is inferred here that velocity weakening may be the typical behaviour at higher normal stress for temperature above 420 °C and at least up to 615 °C, which covers most of the temperature range in the lower crust of geologically stable continental interior. For a dry mafic lower crust in cool continental interiors where frictional sliding prevails over plastic flow, unstable slip nucleation may occur to generate earthquakes.     

3-D seismic structure of the source area of the 1993 Latur, India, earthquake and its implications for rupture nucleations

The Latur earthquake (M_w 6.1) of 29 September 1993 is a rare stable continental region (SCR) earthquake that occurred on a previously unknown blind fault. In this study, we determined detailed three-dimensional (3-D) P- and S-wave velocity (V_p, V_s) and Poisson's ratio (σ) structures by inverting the first P- and S-wave high-quality arrival time data from 142 aftershocks that were recorded by a network of temporary seismic stations. The source zone of the Latur earthquake shows strong lateral heterogeneities in V_p, V_s and σ structures, extending in a volume of about 90 × 90 × 15 km³. The mainshock occurred within, but near the boundary, of a low-V_p, high-V_s and low-σ zone. This suggests that the structural asperities at the mainshock hypocenter are associated with a partially fluid-saturated fractured rock in a previously unknown source zone with intersecting fault surfaces. This might have triggered the 1993 Latur mainshock and its aftershock sequence. Our results are in good agreement with other geophysical studies that suggest high conductivity and high concentration of radiogenic helium gas beneath the source zone of the Latur earthquake. Our study provides an additional evidence for the presence of fluid related anomaly at the hidden source zone of the Latur earthquake in the SCR and helps us understand the genesis of damaging earthquakes in the SCR of the world.     

Seismic lamination and anisotropy of the Lower Continental Crust

Seismic lamination in the lower crust associated with marked anisotropy has been observed at various locations. Three of these locations were investigated by specially designed experiments in the near vertical and in the wide-angle range, that is the Urach and the Black Forrest area, both belonging to the Moldanubian, a collapsed Variscan terrane in southern Germany, and in the Donbas Basin, a rift inside the East European (Ukrainian) craton. In these three cases, a firm relationship between lower crust seismic lamination and anisotropy is found. There are more cases of lower-crustal lamination and anisotropy, e.g. from the Basin and Range province (western US) and from central Tibet, not revealed by seismic wide-angle measurements, but by teleseismic receiver function studies with a P–S conversion at the Moho. Other cases of lamination and anisotropy are from exhumed lower crustal rocks in Calabria (southern Italy), and Val Sesia and Val Strona (Ivrea area, Northern Italy). We demonstrate that rocks in the lower continental crust, apart from differing in composition, differ from the upper mantle both in terms of seismic lamination (observed in the near-vertical range) and in the type of anisotropy. Compared to upper mantle rocks exhibiting mainly orthorhombic symmetry, the symmetry of the rocks constituting the lower crust is either axial or orthorhombic and basically a result of preferred crystallographic orientation of major minerals (biotite, muscovite, hornblende). We argue that the generation of seismic lamination and anisotropy in the lower crust is a consequence of the same tectonic process, that is, ductile deformation in a warm and low-viscosity lower crust. This process takes place preferably in areas of extension. Heterogeneous rock units are formed that are generally felsic in composition, but that contain intercalations of mafic intrusions. The latter have acted as heat sources and provide the necessary seismic impedance contrasts. The observed seismic anisotropy is attributed to lattice preferred orientation (LPO) of major minerals, in particular of mica and hornblende, but also of olivine. A transversely isotropic symmetry system, such as expected for sub-horizontal layering, is found in only half of the field studies. Azimuthal anisotropy is encountered in the rest of the cases. This indicates differences in the horizontal components of tectonic strain, which finally give rise to differences in the evolution of the rock fabric.