Dynamic performance of twin curved cable‐stayed bridges

The dynamic behaviour of two curved cable‐stayed bridges, recently constructed in northern Italy, has been investigated by full‐scale testing and theoretical models. Two different excitation techniques were employed in the dynamic tests: traffic‐induced ambient vibrations and free vibrations. Since the modal behaviour identified from the two types of test are very well correlated and a greater number of normal modes was detected during ambient vibration tests, the validity of the ambient vibration survey is assessed in view of future monitoring. For both bridges, 11 vibration modes were identified in the frequency range of 0ndash;10Hz, being a one‐to‐one correspondence between the observed modes of the two bridges. Successively, the information obtained from the field tests was used to validate and improve 3D finite elements so that the dynamic performance of the two systems were assessed and compared based on both the experimental results and the updated theoretical models. Copyright © 2003 John Wiley & Sons, Ltd.     

Seismic tests on reinforced concrete and steel frames retrofitted with dissipative braces

Seismic tests have been conducted on two 3‐storey structures protected with pressurized fluid‐viscous spring damper devices. One of the structures was a reinforced concrete frame with clay elements in the slabs, while the other one was a steel frame with steel/concrete composite slabs. The spring dampers were installed through K bracing in between the floors. The tests were performed by means of the pseudodynamic method, which allowed the use of large and full‐size specimens, and by implementing a specific compensation strategy for the strain‐rate effect at the devices. The test results allowed the verification of the adequacy of the attachment system as well as the comparison of the behaviour of the unprotected buildings with several protected configurations, showing the benefits of the application of the devices and the characteristics of their performance. The response of the protected structures was always safer than that of the unprotected ones mainly due to a significant increase of equivalent damping. The increase in the damping ratio depends on the level of deformation. Copyright © 2004 John Wiley & Sons, Ltd.     

雾探测器现场对比试验方法研究

简单介绍了WT-1型雾探测器的结构和现场试验情况，对试验期间(2001年12月1日至2002年5月31日)所获取的数据进行了统计分析，计算了试验期间雾探测器数据的缺测率、与人工观测数据及芬兰同类产品的测量结果之间的相关系数，三者之间的相符率，以及数据随时间的变化趋势。以数据处理结果为依据，客观地阐述了雾探测器的优缺点，以及与目前世界上普遍认可的芬兰能见度仪之间的差距，同时也提出了雾探测器改进的一些建议。     

砂土液化判别方法可靠性评价

在进行液化评价简化法与规范液化判别方法对比基础上，利用液化概率的对数回归方程，讨论了规范液化判别方法的可靠性。研究结果表明，我国规范液化判别方法其液化概率变动较大，对于烈度 Ⅶ 度，规范法的液化概率在0.17～0.42间，小于简化法概率0.36～0.43，偏保守。对于烈度 Ⅷ 度和 Ⅸ 度近地表场地，规范法的液化概率高达0.65～0.70，远远高于简化法的液化概率，安全裕度不够。对于含粘粒土质液化评价，规范方法的液化概率总体上都较简化法高，特别是烈度Ⅷ度高粘粒含量其液化概率为0.9。     

变形监测基准点的稳定性检验

基准点的稳定性评价，是变形观测数据处理时不可忽视的重要内容。该文对基准点构网和不构网2种情况时的数据处理方法进行了探讨。     

载荷试验确定基床系数修正方法的讨论

Winkler地基模型是目前工程界应用最广的一种地基模型，但对其关键参数——基床系数k的确定，许多文献的表述并不一致。该文在大量试验资料的基础上，通过对该问题的深入研究，阐明了通过载荷试验确定基床系数修正方法的有关概念。对于砂性土地基，载荷板试验得出的基准基床系数仅需要进行基础大小修正，而对于粘性土地基，则需要进行基础大小和基础形状两项修正。     

天津泰达地区粉土振动液化特性的研究

本文以动三轴试验和原位测试数据为基础，以天津地区砂性土为例，探讨砂性土振动液化机理及孔隙水压力变化规律，采用多种方法分析判别砂性土液化，为高烈度地区重要工程建筑抗震设计提供重要数据。     

Evaluating accuracy for two empirical methods in predicting settlement of drilled shafts

Several theoretical, empirical and semi-empirical methods are available in the literature to predict settlement of drilled shafts in sandy soils. In the Arabian Gulf countries, specifically in the United Arab Emirates, equations and procedure from the rest of the world are being used in analysis and design of drilled shafts without proper validation. It is the aim of this study to assess the applicability and evaluate the accuracy of two well known, and commonly used methods for pile prediction in the United Arab Emirates (UAE), namely Vesic (1977) and Poulos (1979), via comparison with data from field pile load tests conducted on shafts drilled in the region. Some of these tests were conducted for the purpose of this study, while others were made available through the courtesy of International Piling Contractors who are active in the region (e.g. Bauer International and Swiss Borings). Pile load test data were analyzed to back-calculate the model parameters related to settlement under different loading stages. Geological data and soil properties were obtained from studies conducted at the relevant sites. An effort is made to correlate soil properties with the prediction models. Statistical analysis is conducted to assess the accuracy of the results obtained from the two methods at different stages of loading via those obtained from pile load tests. Moreover, a detailed parametric study is conducted to assess the effect of the related parameters on the predicted pile settlement and the estimated settlement at different stages of loading. The study concluded with a recommendation of the most appropriate models and procedures to be followed for predicting the settlement of drilled shafts in the UAE, together with useful charts and correlation relations. Results showed that settlement values predicted by Vesic (1977) and Poulos (1979) overestimates the true values. This revised version was published online in July 2006 with corrections to the Cover Date.     

Bearing capacity of unsaturated expansive soils

It is difficult to determine the bearing capacity of a foundation in unsaturated expansive soil, although this is most important. The bearing capacity of unsaturated expansive soil is related to the drying and wetting environment. Swelling pressure occurs when the soil volume change is constrained as an expansive soil is inundated. The expansive lateral pressure, induced by the swelling pressure is similar to the passive earth pressure. By considering the effect of the expansive lateral pressure in Terzaghi's bearing capacity formula, the bearing capacity of unsaturated expansive soil is derived. Because it is very difficult to measure suction in situ, the bearing capacity is expressed using the expansive lateral pressure offers a feasible approach to calculate the bearing capacity of a foundation in unsaturated expansive soil, when suction is not measured. Plate load tests to measure the bearing capacity in situ were performed for the foundation in natural soil and saturated soil immersed by water. The verification of the bearing capacity formulae presented in this paper is conducted by comparing the predicted results with the results of the plate load tests on unsaturated expansive soils in Handan and Bingxia, China.     

Weights of Evidence Modeling of Mineral Potential: A Case Study Using Small Number of Prospects,Abra, Philippines

Weights of evidence (WofE) modeling usually is applied to map mineral potential in areas with large number of deposits/prospects. In this paper, WofE modeling is applied to a case study area measuring about 920 km² with 12 known porphyry copper prospects. A pixel size of 100 m × 100 m was used in the spatial data analyses to represent in a raster-based GIS lateral extents of prospects and of geological features considered as spatial evidence. Predictor maps were created based on (a) estimates of studentized values of positive spatial association between prospects and spatial evidence; (b) proportion of number of prospects in zones where spatial evidence is present; and (c) geological interpretations of positive spatial association between prospects and spatial evidence. Uncertainty because of missing geochemical evidence is shown to have an influence on tests of assumption of conditional independence (CI) among predictor maps with respect to prospects. For the final predictive model, assumption of CI is rejected based on omnibus test but is accepted based on a new omnibus test. The final predictive model, which delineates 30% of study area as zones with potential for porphyry copper, has 83% success rate and 73% prediction rate. The results demonstrate plausibility of WofE modeling of mineral potential in large areas with small number of mineral prospects.