东白令海的刺黄盖鲽渔场海洋学与渔业生物学特征

本文概述了东白令海形成刺黄盖鲽渔场的海洋学特征,并结合现场调查的标样侧重分析了刺黄盖鲽的渔业生物学特征,本文还概略地讨论了该鱼与渔业资源的关系。     

On the estimation of mooring line characteristic resistance for reliability analysis

The main aim of this work is to derive a correct formulation for the characteristic resistance of a mooring line segment with lognormally distributed component resistances and substitute an equation proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] in a paper published in this journal, which is not correct. The mooring line is considered as a series system and the resistances of individual components of a line segment are statistically independent and identically distributed; furthermore, the case of normally distributed component resistances is also discussed. A comparison with the corresponding equation proposed by DNV-OS-E301 is given. Results show that the formula proposed by Vazquez-Hernandez et al. [Vazquez-Hernandez AO, Ellwanger GB, Sagrilo LVS. Reliability-based comparative study for mooring lines design criteria. Appl Ocean Res 2006; 28(6):398–406] overestimates quite significantly the characteristic resistance of a mooring line segment.     

A dynamic response analysis of tension leg platforms including hydrodynamic interaction in regular waves

A numerical procedure is described for predicting the motion and structural responses of tension leg platforms (TLPs) in waves. The developed numerical approach, in a TLP is assumed to be flexible instead of rigid, is based on a combination of the three dimensional source distribution method and the finite-element method. The hydrodynamic interactions among TLP members, such as columns and pontoons, are included in the motion and structural response analysis. Numerical results are compared with the experimental and numerical ones. The results of comparison confirmed the validity of the proposed approach.     

Reliability-based comparative study for mooring lines design criteria

The characteristic environmental load effect for the design of mooring systems of floating units can be defined by means of three procedures: (a) the one associated to an extreme sea state with a given return period, (b) the worst one from a set of sea states on a contour line associated to a return period or (c) the extreme one based on response statistics for a long-term period. This work presents the result of a reliability-based partial safety factor calibration study for a LRFD mooring line design criteria considering the three approaches mentioned above. The calibration exercise is applied to three FPSOs considering North Sea environmental conditions and different water depths: 200, 800 and 3000 m. The mooring systems investigated take into account mooring lines made up of chains and polyester ropes. It is shown that, among all cases investigated, the design procedure based on the long-term response is the one that presents less scattered reliability indices around the target level.     

Action mechanism of geotextile-reinforced cushion under breakwater on soft ground

Various measures including material experiments, centrifuge modeling tests and FEM numerical analyses were performed to study systematically the action mechanism of the geotextile-reinforced cushion under breakwater on soft ground and the effects of the strata characterization and the reinforcement condition on the stability of the breakwater-ground system. In the aspect of controlling the deformation, the geotextile-reinforced cushion under breakwater constrains the lateral displacement of both the embankment and the ground. From the viewpoint of stress, the reinforcement suppressed the range of high stress level in the system. In general, the weaker the ground is and the greater the modulus of the geotextile is, the more effective the reinforcement is. The tensile force in the geotextile is greater in the range of the main part of the embankment.     

A methodology for assessing the reliability of taut and slack mooring systems against instability

In the present study, a methodology for reliability assessment of slack and taut mooring systems against instability has been presented. For this purpose, first, stability analysis of slack and taut mooring systems has been carried out and instable regions are obtained using procedure available in the literature. Having known the instable region(s), methodology for reliability assessment has been proposed which is based on Monte Carlo Simulation technique. After using the proposed methodology, probabilities of failure and reliability indices has been obtained for the above systems. Some parametric studies, such as, effect of lower and upper limits of instability and effect of frequency range of generations are also included to obtain the results of practical interest.     

软土海岸地区测量控制点标志的设立

分析了软土、湿地、滩涂地区特殊地理环境对测量控制点的影响;主要探讨了此类地区控制点标志的设计、施工。借助于建筑桩基技术和道桥施工方法,首次成功实现了某三角洲湿地滩涂地区统一布网。几年来,结合滩涂湿地测量、海岸防护和滩涂开发工程对部分控制点进行了初步检测,给出了部分检测数据。应用和检测均表明:桩基标石可较好地解决软土、湿地、滩涂地区控制点布设难题,显著提高软土海岸地区测量控制点标志的稳固性,从而延长控制网的可使用期。     

Study on Key Technology of Using Shell Sand as Backfill for Sea Reclamation

1 .IntroductionEpicontinental sea or land could formfromcontinental shelf because of the decreasing sea levelduring Quaternary.There is a large-area shell sand deposit more than ten meters thick in the neriticzone of China .To use the abundant marine shell sandresource as engineering material for ocean engi-neering and port engineeringis veryimportant .Sand (Gred and Bjorn,1999) ,fine sand (Zhangetal .,2002) , mediumand coarse sand (Qiuet al .,1995) ,highly weathered stone ballast (Zhanetal…     

Structural monitoring of offshore platforms using impulse and relaxation response

Monitoring offshore platforms, long span bridges, high rise buildings, TV towers and other similar structures is essential for ensuring their safety in service. Continuous monitoring assumes even greater significance in the case of offshore platforms, which are highly susceptible to damage due to the corrosive environment and the continuous action of waves. Also, since a major part of the structure is under water and covered by marine growth, even a trained diver cannot easily detect damage in the structure. In the present work, vibration criterion is adopted for structural monitoring of jacket platforms. Artificial excitation of these structures is not always practicable and ambient excitation due to wind and waves may not be sufficient for collecting the required vibration data. Alternate methods can be adopted for the same purpose, for example, the application of an impact or a sudden relaxation of an applied force for exciting the structure. For jacket platforms, impact can be applied by gently pushing the structure at the fender while relaxation can be accomplished by pulling the structure and then suddenly releasing it using a tug or a supply vessel in both cases. The present study is an experimental investigation on a laboratory model of a jacket platform, for exploring the feasibility of adapting vibration responses due to impulse and relaxation, for structural monitoring. Effects of damage in six members of the platform as well as changes in deck masses were studied. A finite element model of the structure was used to analyze all the cases for comparison of the results as well as system identification. A data acquisition and analysis procedure for obtaining the response signatures of the platform due to the impulse and relaxation procedure was also developed for possible adoption in on-line monitoring of offshore platforms. From the study, it has been concluded that both impulse and relaxation responses are useful tools for monitoring offshore jacket platforms. The present work forms the basis for the development of an automated, on-line monitoring system for offshore platforms, using neural networks.