Preservation of Palaeoproterozoic early Svecofennian structures in the Orijärvi area, SW Finland—Evidence for polyphase strain partitioning

The predominantly migmatitic Palaeoproterozoic Uusimaa belt preserves early lower-grade Svecofennian structures in the Orijärvi area in SW Finland. This study aims at explaining the deformational history responsible for its preservation and also at defining the age of the early Svecofennian deformation. Detailed structural analysis reveals that the preservation was enabled by polyphase strain partitioning, which initiated during the early Svecofennian D₂ deformation, 1875 Ma ago, as revealed by ion microprobe U–Pb data on zircons from granodioritic and intermediate syn-D₂ intrusive dykes. The D₂ structures were low-strain upright folds at high crustal levels and sub-horizontal high-strain folds at deeper crustal levels. The sub-horizontal D₂ structures were refolded into upright folds during the subsequent late Svecofennian D₃ deformation, whereas the upright D₂ structures behaved as almost rigid blocks that caused strain partitioning into high-strain zones along the block margins. This accounts for the low cumulative strain in specific parts of the Orijärvi area. Further strain partitioning during D₄ caused reverse dip-slip movements along regional-scale shear zones. Crustal depth controlled the metamorphic grade during D₂, when local migmatisation took place at deep crustal levels. Later metamorphic overprint during D₃ deformation is evident from post-D₂ growth of sillimanite and a second generation of andalusite.Similarities in the structural patterns between the Orijärvi area and the Tampere-Vammala area (100 km to the north) suggest that irrespective of the age of the later overprint, subsequent deformation was localised along the margins of the early formed upright domains, while the low-grade rocks within the domains were preserved.     

基坑工程降水渗流场特性分析

基于Biot固结理论和Terzaghi有效应力原理,采用有限元法对深基坑工程降水渗流场进行应力场与渗流场耦合的数值模拟。结合南京九华山隧道基坑工程降水实例,分析了基坑降水水位线的形状、流速分布及地表沉降规律;比较了降水井不同布置、井深对基坑渗流场及周围地表沉降的影响,其结果有助于进一步了解地下水与土体相互作用机理,并为基坑工程降水井的设计提供可靠的指导。     

塔西台地寒武纪沉积环境演化与海陆耦合

碳酸盐岩台地作为陆地与深海间的过渡带,其沉积记录了海洋和邻近陆地的演化。结合已有的沉积学工作,对塔里木盆地西部台地寒武系碳酸盐岩进行全岩及酸不溶物地球化学研究。塔西台地寒武纪主要发育局限台地、局限-蒸发台地或蒸发台地相沉积。碳酸盐岩的地球化学特征主要受沉积环境和成岩作用影响,对研究区寒武系白云岩来说,其元素组成极易受沉积微相的控制,氧同位素组成则很可能已被成岩作用改造,仅原生、准同生白云岩的Sr/Ba、Fe/Mn和C同位素可反映沉积相演化对应的古盐度、离岸距离等沉积环境特征的变化,酸不溶物化学蚀变指数（CIA值）则指示邻近陆地的化学风化强度与气候特征。寒武纪时期,塔西台地在相对海平面较高时发育局限台地相沉积,以水体盐度较低、沉积环境离岸较远和生物活动相对较弱为特征,陆地化学风化强度适中,气候温暖湿润;在相对海平面较低时发育蒸发台地相沉积,具有水体盐度较高、沉积环境离岸较近和生物活动相对较强等特点,陆地化学风化强烈,气候炎热极端;在相对海平面适中时发育局限-蒸发台地,沉积环境和邻近陆地的特征介于前述二者之间。沉积相演化对应的较长周期的海陆演化可能主要受全球海平面升降及宏观气候变化控制,具体表现为相对海平面升降所导致的海相沉积环境的变化,以及气候变化引起的陆地化学风化强度的变化。寒武纪塔西台地所处区域的海洋-陆地演化具有高度耦合的特征。     

真三轴气固耦合煤体渗流试验系统的研制及应用

为了更真实地模拟煤岩在掘进巷道迎头等环境下的应力状态,研究三向应力环境下煤岩的损伤变形及瓦斯渗流情况,自主研发了真三轴气-固耦合煤体渗流试验系统。该装置主要由真三轴压力室、液压伺服系统、气体渗流系统和监测与控制系统组成,采用的试件尺寸为200 mm×100 mm×100 mm,可施加的最大轴压(?1)为70 MPa、最大侧压（?2）为35 MPa、最大侧压（?3）为10 MPa、最大瓦斯压力为6 MPa。该装置具有以下特点：(1) ?1、?2采用刚性压头加载,?3采用柔性加载,三向应力分别独立加载;(2) 设计了刚柔性压头及传压滑杆,使得?1与?2方向压头在同时加载过程中互不干扰;(3) 通过伺服液压系统控制加载功能,使得装置性能稳定,应力与位移加载精确,易于控制;(4) 气体渗流系统采用蜂窝孔对试件进行面通气,确保试件进气端瓦斯压力均匀分布;(5) 采用多种高精度传感器进行监测,实时记录煤体所受应力值、变形量及瓦斯渗流量。用两种不同应力路径下的渗流试验对该系统准确性和可靠性进行了验证,结果表明,该装置性能稳定可靠。该装置可用于揭示煤与瓦斯在三向应力条件下的耦合作用机制,为防治瓦斯灾害及研究瓦斯抽采提供了可靠的试验基础。     

9: Processes of tectonism, magmatism and mineralization: Lessons from Europe

Metallogenic provinces in Europe range in age from the Archaean to the Neogene. Deposit types include porphyry copper and epithermal Cu–Au, volcanic-hosted massive sulphide (VMS), orogenic gold, Fe-oxide–Cu–Au, anorthosite Fe–Ti-oxide and sediment-hosted base-metal deposits. Most of them formed during short-lived magmatic events in a wide range of tectonic settings; many can be related to specific tectonic processes such as subduction, hinge retreat, accretion of island arcs, continental collision, lithosphere delamination or slab tear. In contrast, most sediment-hosted deposits in Europe evolved in extensional, continental settings over significant periods of time. In Europe, as elsewhere, ore formation is an integral part of the geodynamic evolution of the Earth's crust and mantle. Many tectonic settings create conditions conducive to the generation of water-rich magma, but the generation of ore deposits appears to be restricted to locations and short periods of change in temperature and stress, imposed by transitory plate motions. Crustal influence is evident in the strong structural controls on the location and morphology of many ore deposits in Europe. Crustal-scale fault–fracture systems, many involving strike-slip elements, have provided the fabric for major plumbing systems. Rapid uplift, as in metamorphic core complexes, and hydraulic fracturing can generate or focus magmatic–hydrothermal fluid flow that may be active for time spans significantly less than a million years. Once a hydrologically stable flow is established, ore formation is strongly dependent on the steep temperature and pressure gradients experienced by the fluid, particularly within the upper crust. In Europe, significant fracture porosity deep in the crystalline basement (1%) is not only important for magmatic–hydrothermal systems, but allows brines to circulate down through sedimentary basins and then episodically upward, expelled seismically to produce sediment-hosted base-metal deposits and Kupferschiefer copper deposits. Emerging research, stimulated by GEODE, can improve the predicting power of numerical simulations of ore-forming processes and help discover the presence of orebodies beneath barren overburden.     

Influence of tectonic structures on the Hope Slide, British Columbia, Canada

The Hope Slide, which occurred on January 9, 1965, involved an estimated 47-Mm³ of meta-volcanics and intrusive rocks. Previous workers reported the presence of tectonic structures (faults and shear zones) along the failure surface at the Hope Slide. These tectonic features were investigated in detail to assess their effects on rock-mass quality and the related implications for slope stability. This paper integrates basic field and laboratory concepts from structural and engineering geology. Subdividing the failure area into structural domains allowed distinct discontinuity sets to be associated with specific tectonic structures. The Geological Strength Index (GSI) was used to estimate the rock-mass damage related to the tectonic structures. Low GSI values were seen to outline tectonic damage zones. Point-load tests were used to characterise the compressive strength of rocks adjacent to the tectonic structures. Strength anisotropy, tentatively attributed to damage caused by a large shear zone, was observed in greenstone samples. Seepage zones along the failure surface were observed preferentially along shallow discontinuities that dipped downslope and in rock masses of good quality (GSI > 40). An alternative morphology of the slope failure is proposed by distinguishing between the extent of the surficial damage due to the rock-slope failure and the zone of failed material (depletion zone). For the first time, a kinematic mechanism for the Hope Slide is proposed, based on a preliminary 3-dimensional block model. A pre-1965 DEM was produced from estimates of material lost and gained as reported by previous workers. The pre-1965 DEM revealed that the tectonic structures recognised during fieldwork bounded the material that failed in the 1965 event.     

阿姆河右岸东南部吉萨尔山前中下侏罗统构造格架及成因分析

以现有地质及地震资料为基础,对阿姆河右岸区块东南部靠近吉萨尔山前地区的中下侏罗统主要构造特征进行探讨,一方面有利于促进该区中下侏罗统油气勘探,同时也有利于深化对造山带向盆地过渡的山前地区构造变形规律的认识。研究表明：该区中下侏罗统整体表现为由三列近似呈雁行状排列的NE向背斜带组成的褶皱-冲断构造。从控制背斜构造发育的断裂活动特征看,东部山前断层表现为由南东向北西方向逆冲,活动强度大,向西逆断层运动的强度逐渐减弱,且由南向北西部断层的逆冲运动方向发生反向变化,在研究区的北部发育典型的构造三角带。西部背斜带可视为断裂运动方式由南向北变化导致的调节构造。沿构造带走向,三列背斜构造高点由南向北逐渐升高。通过对中下侏罗统构造变形与上覆地层构造特征的比较,结合该区侏罗系沉积特征,认为中下侏罗统构造变形是与上覆地层构造变形共同形成于新近纪喜山期统一的区域构造运动背景下。其主要构造变形机制是晚古近-新近纪以来,在印度板块、阿拉伯板块和欧亚板块碰撞远程效应影响下,受吉萨尔山脉的隆升挤压和研究区北部NW向的大型断裂如布哈拉断裂、曼格什拉克断裂的右旋压扭共同作用而成。     

新疆库车地区秋里塔格构造带成因分析

秋里塔格构造带位于库车前陆逆冲带前锋,区域构造位置介于库车坳陷三叠-侏罗系烃源岩生排烃中心与塔北前缘隆起带之间,第三系广泛分布两套膏盐岩层,发育多套储盖组合和复杂的构造样式,石油地质条件非常优越.本文在分析3个区带的变形特征基础上,探讨了盐上层和盐下层的构造成因,认为盐上层的构造成因与盐层的流动性有关,西段变形比东段强烈;盐下层构造成因东、西差异较大,东段与盐层的塑性变形无关,西段则受其影响.