均匀离散分布的平面应变过程和Fry法应变测量

本文运用 Apple Macitonsh 计算机对无应变的均匀离散点分布进行系列平面应变模拟,应变叠加模式分别采用具普遍意义的成岩压实+顺层缩短(LPS)+压溶作用和成岩压实+简单剪切+压溶作用。对各应变阶段的变形点分布进行相应的 Fry 法应变测量,并配合低变形砂岩样品的 Fry 法应变分析实例.证实 Fry 法应变测量方法为一非常有用的应变测量方法,其结果不仅能较好地揭示全岩总应变特征,而且能揭示出许多应变叠加的信息,Fry 法揭示的全岩有限应变椭球主面的方位也较为真实可靠。而 Fry 法运用于应变分布不均匀的劈理化岩石中时,能揭示不同变形域的应变特征,从而达到应变分解的目的。     

Comparison of two extensometric stations in Hungary

Quartz-tube extensometers are used to measure rock deformations in two geodynamic observatories in Hungary in order to contribute to the investigation of recent tectonic movements on the area of the Pannonian Basin. One of the observatories is situated on the border of the Alps at Sopronbánfalva and is set in the metamorphic (gneiss) material of the mountains. The other station is in the basically karstic environment of the Mátyáshegy (Mátyás Hill) near Budapest. The aim of this paper is to investigate how the local conditions, such as structure of the observatory, topography or geologic features of the surrounding rocks, lead to additional or modified deformations of the extensometric stations. Data collected over eight years were processed and analysed to compare the observatories taking into account geologic, lithologic and topograpic properties of the measurement sites. Tidal and coherence analysis of the continuous strain measurements revealed that the instrument at Sopronbánfalva is more sensitive to atmospheric pressure loading than the extensometer at Mátyáshegy. Signal to noise values from the data processing of the short period variations support the higher stability of tidal strain measurements at Mátyáshegy. The strain rates measured by extensometers in both observatories are in good agreement with the strain rates inferred from GPS measurements of the Hungarian GPS Geodynamic Reference Network and the Central European GPS Reference Network.     

形变,应变短临前兆标志体系

建立各手段的前兆异常标志,从而组合各类前兆标志体系是“八五”地震短临预报攻关研究项目的重要目标之一。本文以形变,应变手段的主要研究对象,初步建立了一个形变应变短临前兆标志体系,并总结出了各种异常的判别标志,为利用系统优化理论和专家系统理论进一步研究形变应前兆系统和地震之间的关系,从而为提高中短期地震预报的水平打下了一定的基础。     

新疆钻孔应变异常特征及其与地震三要素关系研究

将新疆高精度钻孔应变仪１０年来观测到的应变异常划分为趋势异常、短期异常、临震异常三类，并对这三种异常的特征进行了分析总结．认为，地震三要素与应变异常参量关系密切，震级与异常量级、震中距有着确定性关系。     

基于数字图像测量系统的三轴试样变形研究

基于亚像素角点检测的图像测量技术能够记录试样表面方块角点每一时刻的位移,从而获得试样的表面应变场。将基于试样表面6行方块分别计算的应变与基于全部6行方块的整体平均计算得到的结果进行比较,显示中间4行方块区域的变形基本不受端部约束影响。还对采用试样上、中、下三个部分与整个试样的测量结果获得的应力与应变特性进行了对比分析。该方法能够测量任意时刻试样的轴向应变场,通过轴向应变场的变化可以准确地描述试样剪切带的产生、发展以及完全形成的全过程。     

大华北浅源地震与日本海西部及我国东北深震的关系

分析了大华北浅源地震与日本海西部及我国东北深震的关系,认为本世纪来日本海西部—我国东北深震经历了5个相对活跃期,大华北各地震区相应经历这5个活跃期的影响期。根据大华北M≧6级浅源地震与深震活动的相关性,建立了太平洋板块楔形俯冲带端部重大深震事件导致大华北浅源M≧6级地震发生的板块俯冲模型,应变波传播速度约94km/年,地表视速度约100km/年。重大深震事件突出、模型稳定性强,预测实验表明模型公式可做大华北地震监测参考。用本模型可以解释浅源地震迁移、各地震区地震与深震活动相关等现象。     

3-D shell analysis of cylindrical underground structures under seismic shear (S) wave action

The 3-D shell theory is employed in order to provide a new perspective to earthquake-induced strains in long cylindrical underground structures, when soil-structure interaction can be ignored. In this way, it is possible to derive analytical expressions for the distribution along the cross-section of axial, hoop and shear strains and also proceed to their consistent superposition in order to obtain the corresponding principal and von Mises strains. The resulting analytical solutions are verified against the results of 3-D dynamic FEM analyses. Seismic design strains are consequently established after optimization of the analytical solutions against the random angles which define the direction of wave propagation relative to the longitudinal structure axis, the direction of particle motion and the location on the structure cross-section. The basic approach is demonstrated herein for harmonic shear (S) waves with plane front, propagating in a homogeneous half-space or in a two layer profile, where soft soil overlays the bedrock.     

变形岩石磁性各向异性及其应变相关性的模拟

本文介绍处于弱磁场中的磁性砂岩人工样品,在三种应变作用下磁化率各向异性特征的研究结果.结果表明,磁化率椭球与应变椭球之间,显示了密切的相关性.文中并对上述情况下,磁化率各向异性特征及剩磁特征,从机理上进行了分析.     

Creep of saturated materials as a chemically enhanced rate‐dependent damage process

Material behaviour that exhibits characteristics of creep induced by a spontaneous mineral dissolution enhanced by material damage is studied. It is believed that the characteristic rates of the chemical processes involved determine the time‐rate dependence of the resulting strain. A basic model of a combined chemo‐plastic softening and chemically enhanced deviatoric strain hardening for saturated geomaterials is presented. Chemical softening is postulated to occur as a consequence of the net mass removal resulting from dissolution and precipitation of specific minerals occurring at the damage‐generated inter‐phase interfaces. Closed and open systems are discussed. In the former case, deformation at constant stress results entirely from a local compensation mechanism between the chemical softening and strain hardening. The classical three stages of creep are interpreted in terms of mechanisms of dissolution and precipitation, as well as the variation in the reaction surface areas involved in the mass exchange. In an open system, the above local mechanism is enhanced by the removal of mass via diffusion of species affecting the mass balance. Such a system is addressed via a boundary value problem as shown in an example. Copyright © 2007 John Wiley & Sons, Ltd.     

Short-lived polyphase deformation during crustal thickening and exhumation of a collisional orogen (Ribeira Belt,Brazil)

The Ribeira Belt (Brazil) is a Neoproterozoic collisional-related feature that was located in a south-central position in West Gondwana. We present quantitative data on finite strain, flow vorticity and deformation temperatures for the Curitiba Terrane, a major segment of the southern Ribeira Belt. Six deformation phases (D₁-D₆) related with crustal thickening and exhumation were recognized. D₁ and D₂-related microstructures are preserved exclusively within porphyroblasts, in part grown during stages of high-pressure (∼9–12 kbar) isobaric heating after crustal thickening. D₃ phase was active from peak metamorphism attained in contrasting crustal levels (810–400 °C), to the early stage of exhumation (500–400 °C), as indicated by petrological, microstructural and quartz c-axis fabric evidence. Kinematic vorticity results indicate that the SL₃ mylonitic fabric resulted from a simple shear-dominated deformation related with westward thrusting. North-verging overturned D₄ folds with E-W-trending subhorizontal axes derived from a pure shear-dominated deformation. Regional D₅ open folds with subvertical axes and NNE-SSW-trending traces were produced by indentation tectonics. D₆ phase comprises retrograde orogen-parallel transcurrent shear zones related with scape tectonics. Geochronological data indicate that D₃-D₆ phases occurred between 584 and 580 Ma, suggesting a fast exhumation rate of ∼8 mm/year for the deepest rocks from the southern Ribeira Belt.