火山岩坡残积土地区暴雨滑坡泥石流的形成机理

暴雨条件诱发的浅层坡残积土质斜坡破坏的机理受控于土体在低有效围压条件下的应力应变特性。1993年11月4～5日,香港大屿山地区特大局部性暴雨导致在120km2范围内产生自然滑坡泥石流800余处,且绝大多数发生于火山岩风化坡残积土地区。本文对火山岩风化坡残积土开展了室内偏压固结不排水剪和偏压固结常剪应力排水剪试验,揭示了该类土的应力应变特性;在此基础上,分析了暴雨滑坡泥石流的形成机理和过程。     

郯庐断裂带肥东北部文集地区构造岩类型与构造变形分析

位于郯庐断裂带中南部的肥东地区是郯庐断裂带内韧性剪切带出露的主体区域之一。本文从肥东北部文集地区的构造岩组成及其变形入手,通过详细的野外观测、室内显微构造变形分析来确定该地区构造变形的几何学形态及其涡度、有限应变、分维度、差异应力、应变速率等参数。研究区主要出露角闪岩相肥东变质杂岩,构造岩以糜棱岩和糜棱岩化片麻岩为主,岩石变形强烈。根据极摩尔圆法得到的运动学涡度值为0.729~0.870,指示区域内的韧性剪切活动以简单剪切为主。几何学形态上,肥东北部文集地区构造整体呈一背形展出,其枢纽走向NE-SW,轴面倾向SE,物质及变形强度等方面均表现出一定的规律和对称性。研究区内动态重结晶石英颗粒边界具有统计学上的自相似性,其分维值D在1.143~1.208之间,且自背形核部向两翼,颗粒粒径增大,分维值减小。差异应力Δσ介于17.86~55.18MPa之间,应变速率ε值在1.960×10^-13~7.330×10^-12s^-1之间,且背形核部差异应力和应变速率较两翼大,呈近似对称性分布。通过对比以上构造参数可以发现,区内差异应力和应变速率表现出一定的正相关性,自核部向两翼二者均呈减小趋势;动态重结晶石英颗粒则与应变速率呈负相关性,即核部颗粒细小、两翼增大。本文从几何学、运动学以及显微构造变形分析等方面对该区构造变形展开精细化研究,借此来分析肥东北部地区郯庐断裂带的构造形态和运动学特征,这对进一步认识郯庐断裂带的演化过程及构造模型的建立有着重要的意义。     

Short-lived polyphase deformation during crustal thickening and exhumation of a collisional orogen (Ribeira Belt,Brazil)

The Ribeira Belt (Brazil) is a Neoproterozoic collisional-related feature that was located in a south-central position in West Gondwana. We present quantitative data on finite strain, flow vorticity and deformation temperatures for the Curitiba Terrane, a major segment of the southern Ribeira Belt. Six deformation phases (D₁-D₆) related with crustal thickening and exhumation were recognized. D₁ and D₂-related microstructures are preserved exclusively within porphyroblasts, in part grown during stages of high-pressure (∼9–12 kbar) isobaric heating after crustal thickening. D₃ phase was active from peak metamorphism attained in contrasting crustal levels (810–400 °C), to the early stage of exhumation (500–400 °C), as indicated by petrological, microstructural and quartz c-axis fabric evidence. Kinematic vorticity results indicate that the SL₃ mylonitic fabric resulted from a simple shear-dominated deformation related with westward thrusting. North-verging overturned D₄ folds with E-W-trending subhorizontal axes derived from a pure shear-dominated deformation. Regional D₅ open folds with subvertical axes and NNE-SSW-trending traces were produced by indentation tectonics. D₆ phase comprises retrograde orogen-parallel transcurrent shear zones related with scape tectonics. Geochronological data indicate that D₃-D₆ phases occurred between 584 and 580 Ma, suggesting a fast exhumation rate of ∼8 mm/year for the deepest rocks from the southern Ribeira Belt.     

Strain partitioning into dry and wet zones and the formation of Ca-rich myrmekite in syntectonic syenites: A case for melt-assisted dissolution-replacement creep under granulite facies conditions

The formation of Ca-rich myrmekites is described in syntectonic syenites crystallized and progressively deformed under granulite facies conditions. The syenites are found in high- and low-strain zones where microstructure and mineral composition are compared. Heterogeneously distributed water-rich, late-magmatic liquids were responsible for strain partitioning into dry and wet high-strain zones at outcrop scale, where contrasting deformation mechanisms are reported. In dry high-strain zones K-feldspar and clinopyroxene are recrystallized under high-T conditions. In wet high-strain zones, the de-stabilization of clinopyroxene and pervasive replacement of relatively undeformed K-feldspar porphyroclasts by myrmekite and subordinate micrographic intergrowths indicate dissolution-replacement creep as the main deformation mechanism. The reworking of these intergrowths is observed and is considered to contribute significantly to the development of the mylonitic foliation and banding. A model is proposed for strain partitioning relating a positive feedback between myrmekite-forming reaction, continuous inflow of late-magmatic liquids and dissolution-replacement creep in the wet zone at the expenses of original mineralogy preserved in the dry zones. Melt-assisted dissolution-replacement creep in syntectonic environments under granulite-facies conditions may extend the field of operation of dissolution-replacement creep, changing significantly the rheology of the lower continental crust.     

均匀离散分布的平面应变过程和Fry法应变测量

本文运用 Apple Macitonsh 计算机对无应变的均匀离散点分布进行系列平面应变模拟,应变叠加模式分别采用具普遍意义的成岩压实+顺层缩短(LPS)+压溶作用和成岩压实+简单剪切+压溶作用。对各应变阶段的变形点分布进行相应的 Fry 法应变测量,并配合低变形砂岩样品的 Fry 法应变分析实例.证实 Fry 法应变测量方法为一非常有用的应变测量方法,其结果不仅能较好地揭示全岩总应变特征,而且能揭示出许多应变叠加的信息,Fry 法揭示的全岩有限应变椭球主面的方位也较为真实可靠。而 Fry 法运用于应变分布不均匀的劈理化岩石中时,能揭示不同变形域的应变特征,从而达到应变分解的目的。     

地震过程中形变能的演化特征

本文利用非线性理论分析了震前形变能随时间的演化关系，导出了应力与应变的本构关系为非线性时的突变演化模型。最后利用青海门源６．４级地震前后的跨断层形变资料，计算了非线性形变的演化过程。取得如下认识：１．震前形变能的演化过程是不稳定过程；２．形变能的突变发生在非平衡区；３．门源地震前后的跨断层地形变资料的计算结果与理论分析基本一致。     

新疆钻孔应变异常特征及其与地震三要素关系研究

将新疆高精度钻孔应变仪１０年来观测到的应变异常划分为趋势异常、短期异常、临震异常三类，并对这三种异常的特征进行了分析总结．认为，地震三要素与应变异常参量关系密切，震级与异常量级、震中距有着确定性关系。     

粘滑失稳及其物理场时空分布的实验研究

摩擦滑动的物理场实验研究表明：（１）能量空间分布的差异是失稳的重要条件，单发型大事件常发生于高能量向低能量的突变带或高能量背景区内的相对低能量区；（２）单发型大事件的孕育过程常常经历若干个能量输入输出循环，产生多个前兆阶段，并在失稳前源区常有一个弱化过程。小震或群发型事件失稳前常常只有一个能量积累与强化的过程，失稳前兆阶段性反映较差；（３）粘滑失稳时断层的位错与声发射的大小未见明显关系     

典型构造背景应变场特征及其演化趋势

在外力作用下，一定的构造形式周围会产生特定的应变图象。其形态特征在失稳过程中会发生变化。研究应变图象的特征及其变化有助于鉴别失稳前兆，预测变形发展趋势。受构造形式控制，应变场在空间分布上可以划分为若干区域。在变形与失稳过程中，各个区域既有不同的变形行为，也相互影响、相互制约，构成一个紧密联系的动态体系。因此，应当全面观测应变场图象的时间与空间动态演化过程，从中获取失稳前兆，分析失稳机制     

应变能释放随时间变化的聚类方法研究

由于线性回归模型应用的广泛性，本文设定样品集的趋势是线性的，在用最优分割法对地震活动性类研究的基础上引进线性模型，扩大了最优分割法在地震活动性分类中的应用，将降类问题与建模问题有机地结合起来，去揭示地震活动性中的某种内在规律，这对于探索地震预报，研究地震发生的规律性有一定的实际意义。