An experimental study on water entry of asymmetric wedges

The aim of the paper is to provide an experimental reference for investigation of asymmetric water entry of wedges. Parameters of the study include initial deadrise angle, inclination angle and impact speed. Initial deadrise angles of the wedges were 20° and 30° with inclination angles ranging from 0° to 15° in 5° increments. Wedges were freely fallen from three different heights. Time histories of impact pressure and body acceleration were recorded. Sampling rate of measurements were set to 25 KHz. Main configuration of each test including mass of the wedge and water level were kept unchanged during all experiments. Additionally, several calibration tests were conducted to assess the repeatability and accuracy of the recorded data. The experimental results are compared with different entry theories and other available experiments. The comparison shows a reasonable agreement and indicates that the inclination angle can dramatically affect the impact pressure experienced by the wedges. Finally, the results show that the traditional asymmetric theories are not appropriate for all inclination angles.     

小入射角下海浪后向散射系数不对称性和各向异性分析验证

基于北京遥测技术研究所机载波谱仪实测数据以及ECMWF提供的风场数据,分析了不同风速条件下小入射角海浪平均后向散射系数不对称性与各向异性随入射角的变化特性,并对导致这一现象的原因进行了初步分析。结果表明:小入射角下,海浪平均后向散射系数随入射角增大呈现递减趋势并在18°时达到某一稳定值,之后基本维持不变;海浪后向散射系数不对称性与各向异性均随入射角增大呈现递增趋势,同样在18°增大至某一稳定值,之后基本维持不变;低风速条件下,海浪不对称性和各向异性与风速有关,且风速越大不对称性与各向异性越明显。     

基于Hyperion高光谱数据和随机森林方法的岩性分类与分析

探索利用高光谱数据的岩性填图新方法是遥感地质应用领域的重要需求之一。本文运用随机森林方法和EO-1Hyperion高光谱数据,对新疆塔里木西北部柯坪地区的局部区域进行岩性分类,并对相关问题进行分析。分别利用光谱特征以及加入光谱一阶导数特征进行岩性分类,并对不同特征对岩性分类的重要性进行分析,同时与现有的基于光谱角制图方法(SAM)进行比较。结果表明,与SAM方法相比,随机森林方法得到了更高精度的岩性分类结果,是一种有效可行的岩性分类方法。根据特征重要性的排序,蓝绿光波段、短波红外波段以及相应的一阶导数特征对研究区Hyperion数据的沉积岩岩性分类贡献更大。     

植被高光谱特征分析及其病害信息提取研究

高光谱(hyperspectral)遥感是20世纪末地球观测系统中最重要的技术突破之一。根据植被高光谱数据的植被冠层光谱反射特征和诊断性光谱吸收特征,利用光谱连续统去除法,探讨光谱一阶微分反射比(FDR)和从连续统去除的光谱吸收特征中获得的波段深度(BD)、连续统去除后微分反射比(CRDR)、波段深度比(BDR)和归一化波段深度指数(NBDI)等光谱特征参量。结合多时相的条锈病小麦PHI航空高光谱影像,分析条锈病对小麦光谱的影响及其光谱特征,并运用光谱特征参量和波谱角制图(SAM)技术监测和识别小麦条锈病。     

弹性波阻抗在时移地震中的应用分析

常规声波波阻抗由于缺乏横波的信息,使得它对于流体的变化很不敏感,而弹性波阻抗反演,除了与纵波速度,密度有关之外,还与横波速度、入射角度有关,由于考虑了AVO(Amplitude Variation with Offset)效应,使得对流体和岩性的预测能力增强.本文将弹性波阻抗反演应用于时移地震中,采用AVA(Amplitude Variation with Angle)约束稀疏脉冲反演来进行弹性波阻抗反演,得到纵横波阻抗等弹性参数,通过交会图分析,将弹性参数转换为油藏参数,如预测含水饱和度的变化,通过本方法可增强对储层流体的预测,提高储层管理能力.     

大深度载人潜水器低速大漂角模糊滑模航向控制研究

通过模型试验测量大深度载人潜水器低速大漂角运动时所受到的非线性水动力。基于一种新的模糊滑模控制策略,为潜水器设计了鲁棒航向控制器。在不同的漂角子区间内分别设计局部镇定的滑模控制器,然后通过Takagi-Sugeno模糊推理系统将它们光滑连接,得到模糊滑模控制。仿真计算结果充分显示了该控制策略的有效性。     

五圆柱体结构群绕流特性及互扰效应研究

基于Fluent流体计算平台,运用大涡模拟方法对亚临界雷诺数Re=3900下“X”形排列五圆柱体结构群三维绕流特性进行研究,主要分析来流攻角α与间距比L/D两个关键参数对五圆柱体结构群的尾流区三维涡结构演化与流体力系数的影响,并揭示其内在流动互扰机理。研究表明:来流攻角和间距比的变化对五圆柱体结构群流动控制及互扰效应的影响显著。在小间距比工况下,观察到柱体群间隙区域内流体高速流动的现象,导致五圆柱体之间的互扰作用十分强烈。间隙流对中间圆柱体和下游圆柱体有较强的冲击作用,对其表面的流体力分布特性有显著的影响。另外,大间距比工况下,当α=0°与L/D≥5.0工况时,柱体群尾流效应强于其间隙流效应。当α=22.5°与L/D=7.0时,位于下游与中间处的圆柱体流体绕流特性存在较大差异。而当α=45°与L/D≥6.0时,位于上游与中间处的圆柱体尾流区均会产生正负交替的漩涡结构。     

The potential of Pléiades images with high angle of incidence for reconstructing the coastal cliff face in Normandy (France)

To monitor chalk cliff face along the Normandy coast (NW France) which is prone to erosion, we tested the potential of cliff face 3D reconstruction using pairs of images with high angle of incidence at different dates from the agile Pléiades satellites. The verticality aspect of the cliff face brings difficulties in the 3D reconstruction process. Furthermore, the studied area is challenging mainly because the cliff face is north-oriented (shadow). Pléiades images were acquired over several days (multi-date stereoscopic method) with requested incidence angles until 40°. 3D reconstructions of the cliff face were compared using two software: ASP® and ERDAS IMAGINE®. Our results are twofold. Firstly, despite ASP® provides denser point clouds than ERDAS IMAGINE® (an average of 1.60 points/m² from 40° incidence angle stereoscopic pairs on the whole cliff face of Varengeville-sur-Mer against 0.77 points/m² respectively), ERDAS IMAGINE® provides more reliable point clouds than ASP® (precision assessment on the Varengeville-sur-Mer cliff face of 0.31 m ± 2.53 and 0.39 m ± 4.24 respectively), with a better spatial distribution over the cliff face and a better representation of the cliff face shape. Secondly, the quality of 3D reconstructions depends mostly on the amount of noise from raw images and on the shadow intensity on the cliff face (radiometric quality of images).     

无定向导线的粗差检验

介绍了先求定向角γ和连接角δ,进而计算多边形内角和闭合差的粗差检验方法。通过大量实例证明这种方法是完全可靠的。     

图像重建块迭代算法中松弛参数选取的研究

在图像重建中,Landweber迭代算法是图像重建算法中的重要方法.本文将针对Landweber分块迭代算法中松弛参数的选取进行研究.在重建过程中采取对投影矩阵按投影角度分块的方法,选取特定的松弛参数.通过数值实验得出结论:对于按角度分块的块迭代算法,松弛参数选取为λ乘以块矩阵与其共轭转置矩阵乘积的最大特征值分之一,当采集完全投影数据,且λ接近(1/6)～(1/7)时效果最好.另外,本文按角度分块的做法和松弛参数的选取方法对于有限角度图像重建问题也是可行的.