基于光谱角匹配算法的水体信息提取研究

针对水体信息提取时,传统算法不能较好地解决山体阴影被误提为水体的问题,引入多用于高光谱数据处理的光谱角匹配算法,以Land-sat8 OLI(band1-band7)为数据源,以黄河小浪底水库周边区域为实验区,开展水体信息提取研究,结果显示:水体指数法和波段关系提取的结果中有大量的山体阴影信息,提取精度不超过30%,而光谱角匹配法提取结果受阴影的影响较小,提取精度在99%以上。     

基于NGM(1,1,k,c)模型和改进切线角的危岩变形预测

针对危岩变形预测问题,本文以非齐次指数序列的灰色模型(NGM)作为危岩变形预测的基本模型,通过对望霞危岩变形的分析结果显示,NGM(1,1,k,c)模型拟合效果明显优于GM(1,1)模型,说明危岩变形趋势更接近于非齐次指数序列。利用NGM(1,1,k,c)模型结合改进切线角可对危岩变形趋势进行分析预测,可作为危岩稳定性和发展趋势的评估依据。     

城市点云的区域生长三角网构建方法

成熟的倾斜摄影测量及密集匹配技术可获取密集的城市点云,对点云进行三角网构建是真三维建模的关键技术之一。提出了基于区域生长的三角网构建方法,使用双约束条件提高点云的搜索效率,基于点边表数据结构进行网格生长,利用夹角约束和三角形孔洞修补优化网格。实验证明,该方法获取的三角网能够准确地表达楼体、桥状建筑等在内的城市实体,网格优化后的孔洞比例约为1‰并且该方法具有一定的抗噪能力。     

Smoothing and re-roughening processes: The geometric evolution of a single fault zone

The geometry of a fault zone exerts a major control on earthquake rupture processes and source parameters. Observations previously compiled from multiple faults suggest that fault surface shape evolves with displacement, but the specific processes driving the evolution of fault geometry within a single fault zone are not well understood. Here, we characterize the deformation history and geometry of an extraordinarily well-exposed fault using maps of cross-sectional exposures constructed with the Structure from Motion photogrammetric method. The La Quinta Fault, located in southern California, experienced at least three phases of deformation. Multiple layers of ultracataclasite formed during the most recent phase. Crosscutting relations between the layers define the evolution of the structures and demonstrate that new layers formed successively during the deformation history. Wear processes such as grain plucking from one layer into a younger layer and truncation of asperities at layer edges indicate that the layers were slip zones and the contacts between them slip surfaces. Slip surfaces that were not reactivated or modified after they were abandoned exhibit self-affine geometry, preserving the fault roughness from different stages of faulting. Roughness varies little between surfaces, except the last slip zone to form in the fault, which is the smoothest. This layer contains a distinct mineral assemblage, indicating that the composition of the fault rock exerts a control on roughness. In contrast, the similar roughness of the older slip zones, which have comparable mineralogy but clearly crosscut one another, suggests that as the fault matured the roughness of the active slip surface stayed approximately constant. Wear processes affected these layers, so for roughness to stay constant the roughening and smoothing effects of fault slip must have been approximately balanced. These observations suggest fault surface evolution occurs by nucleation of new surfaces and wear by competing smoothing and re-roughening processes.     

顾及拓扑与尖角的分类矢量数据分组压缩算法

针对现有拆分重组法对存在复杂内环以及复杂相交岛屿多边形的分类矢量数据的压缩结果中包含裂缝、重叠及大量尖锐夹角的问题,提出了一种顾及拓扑一致性与尖角的分组压缩方法。依据分类矢量数据中多边形与多边形及其内环的相交关系对矢量矢量数据分组,以修正后拆分重组法结合直接分割法和间接分割法对分类矢量数据分组压缩,压缩结果中不存在裂缝与重叠现象,维护了分类矢量数据的拓扑一致性;通过取回尖角点前后被删除的点,解决了压缩结果中尖角过多的问题。以Landsat8遥感影像分类矢量数据实验验证了文章算法,并与直接分割法、间接分割法、拆分重组法进行了对比分析,验证了本文方法的有效性。     

An experimental study on water entry of asymmetric wedges

The aim of the paper is to provide an experimental reference for investigation of asymmetric water entry of wedges. Parameters of the study include initial deadrise angle, inclination angle and impact speed. Initial deadrise angles of the wedges were 20° and 30° with inclination angles ranging from 0° to 15° in 5° increments. Wedges were freely fallen from three different heights. Time histories of impact pressure and body acceleration were recorded. Sampling rate of measurements were set to 25 KHz. Main configuration of each test including mass of the wedge and water level were kept unchanged during all experiments. Additionally, several calibration tests were conducted to assess the repeatability and accuracy of the recorded data. The experimental results are compared with different entry theories and other available experiments. The comparison shows a reasonable agreement and indicates that the inclination angle can dramatically affect the impact pressure experienced by the wedges. Finally, the results show that the traditional asymmetric theories are not appropriate for all inclination angles.     

基于Hyperion高光谱数据和随机森林方法的岩性分类与分析

探索利用高光谱数据的岩性填图新方法是遥感地质应用领域的重要需求之一。本文运用随机森林方法和EO-1Hyperion高光谱数据,对新疆塔里木西北部柯坪地区的局部区域进行岩性分类,并对相关问题进行分析。分别利用光谱特征以及加入光谱一阶导数特征进行岩性分类,并对不同特征对岩性分类的重要性进行分析,同时与现有的基于光谱角制图方法(SAM)进行比较。结果表明,与SAM方法相比,随机森林方法得到了更高精度的岩性分类结果,是一种有效可行的岩性分类方法。根据特征重要性的排序,蓝绿光波段、短波红外波段以及相应的一阶导数特征对研究区Hyperion数据的沉积岩岩性分类贡献更大。     

植被高光谱特征分析及其病害信息提取研究

高光谱(hyperspectral)遥感是20世纪末地球观测系统中最重要的技术突破之一。根据植被高光谱数据的植被冠层光谱反射特征和诊断性光谱吸收特征,利用光谱连续统去除法,探讨光谱一阶微分反射比(FDR)和从连续统去除的光谱吸收特征中获得的波段深度(BD)、连续统去除后微分反射比(CRDR)、波段深度比(BDR)和归一化波段深度指数(NBDI)等光谱特征参量。结合多时相的条锈病小麦PHI航空高光谱影像,分析条锈病对小麦光谱的影响及其光谱特征,并运用光谱特征参量和波谱角制图(SAM)技术监测和识别小麦条锈病。     

弹性波阻抗在时移地震中的应用分析

常规声波波阻抗由于缺乏横波的信息,使得它对于流体的变化很不敏感,而弹性波阻抗反演,除了与纵波速度,密度有关之外,还与横波速度、入射角度有关,由于考虑了AVO(Amplitude Variation with Offset)效应,使得对流体和岩性的预测能力增强.本文将弹性波阻抗反演应用于时移地震中,采用AVA(Amplitude Variation with Angle)约束稀疏脉冲反演来进行弹性波阻抗反演,得到纵横波阻抗等弹性参数,通过交会图分析,将弹性参数转换为油藏参数,如预测含水饱和度的变化,通过本方法可增强对储层流体的预测,提高储层管理能力.     

The potential of Pléiades images with high angle of incidence for reconstructing the coastal cliff face in Normandy (France)

To monitor chalk cliff face along the Normandy coast (NW France) which is prone to erosion, we tested the potential of cliff face 3D reconstruction using pairs of images with high angle of incidence at different dates from the agile Pléiades satellites. The verticality aspect of the cliff face brings difficulties in the 3D reconstruction process. Furthermore, the studied area is challenging mainly because the cliff face is north-oriented (shadow). Pléiades images were acquired over several days (multi-date stereoscopic method) with requested incidence angles until 40°. 3D reconstructions of the cliff face were compared using two software: ASP® and ERDAS IMAGINE®. Our results are twofold. Firstly, despite ASP® provides denser point clouds than ERDAS IMAGINE® (an average of 1.60 points/m² from 40° incidence angle stereoscopic pairs on the whole cliff face of Varengeville-sur-Mer against 0.77 points/m² respectively), ERDAS IMAGINE® provides more reliable point clouds than ASP® (precision assessment on the Varengeville-sur-Mer cliff face of 0.31 m ± 2.53 and 0.39 m ± 4.24 respectively), with a better spatial distribution over the cliff face and a better representation of the cliff face shape. Secondly, the quality of 3D reconstructions depends mostly on the amount of noise from raw images and on the shadow intensity on the cliff face (radiometric quality of images).