浅谈孔压静力触探

本文简单介绍了孔压触探所用设备及准备工作,对孔压触探探头的饱和过程和JTY-3A型静探数据采集仪的操作步骤进行了说明,最后提出了测试有关要求及注意事项。     

滑坡灾害防治工程中施工组织设计对工程投资概算影响的研究

本文通过对具体地质灾害防治工程初步设计阶段的施工组织设计与工程投资概算之间关系分析, 指出施工组织对工程投资概算的影响不小于工程设计和地质勘查资料的影响, 施工组织设计对概算可靠度的提高有很重要的意义。     

Mapping multiple tree species classes using a hierarchical procedure with optimized node variables and thresholds based on high spatial resolution satellite data

ABSTRACT

Tree species distribution mapping using remotely sensed data has long been an important research area. However, previous studies have rarely established a comprehensive and efficient classification procedure to obtain an accurate result. This study proposes a hierarchical classification procedure with optimized node variables and thresholds to classify tree species based on high spatial resolution satellite imagery. A classification tree structure consisting of parent and leaf nodes was designed based on user experience and visual interpretation. Spectral, textural, and topographic variables were extracted based on pre-segmented images. The random forest algorithm was used to select variables by ranking the impact of all variables. An iterating approach was used to optimize variables and thresholds in each loop by comprehensively considering the test accuracy and selected variables. The threshold range for each selected variable was determined by a statistical method considering the mean and standard deviation for two subnode types at each parent node. Classification of tree species was implemented using the optimized variables and thresholds. The results show that (1) the proposed procedure can accurately map the tree species distribution, with an overall accuracy of over 86% for both training and test stages; (2) critical variables for each class can be identified using this proposed procedure, and optimal variables of most tree plantation nodes are spectra related; (3) the overall forest classification accuracy using the proposed method is more accurate than that using the random forest (RF) and classification and regression tree (CART). The proposed approach provides results with 3.21% and 7.56% higher overall land cover classification accuracy and 4.68% and 10.28% higher overall forest classification accuracy than RF and CART, respectively.     

浅水流动计算中—阶有限体积法Osher格式的实现

近年来,一阶有限体积法Osher格式已在二维浅水明流的一批模型问题和应用实例中获得成功。本文首次讨论其算法实现的种种问题。核心是建立单元水力模型-阶梯流,在数学上可用一类特殊的黎曼问题来描述。将该问题化作气体动力学中的黎曼问题近似求解,然后对结果加以校正。还在理论分析和数值试验的基础上详细讨论了各种外部边界条件、内部边界和动边界的处理,构成完整的算法。     

放射性地层学的探讨

探讨了放射性地层的划分原则和单位、界线、放射性地层对比、放射性异常的概念以及放射性地层工作程序和研究方法,提出在区调中开展放射性地层研究的建议。     

RGMAP系统在1:5万矿调中的应用

采用数字填图系统(RGMAP)开展区域地质矿产调查,已成为今后工作的必须手段.针对15万矿调中路线地质矿产调查、化探异常查证、矿(化)点踏查和检查评价等传统的矿产调查工作内容,就如何充分利用数字填图系统提供的数据模型与"3S"技术平台,提高矿调工作效率与精度,结合野外数据采集与室内数据综合应用进行了尝试性地探讨.     

有序样品聚类的最优分割应用程序开发

在地层划分、蚀变、矿化、圈定矿体的研究中，有序样品聚类的最优分割法——数学处理方法是一个十分有效的方法，而该方法的数据处理是一个复杂而繁琐的过程。为了有志于地质研究的爱好者，根据最优分割的数学处理原理，将最优分割法编制成易于为非计算机专业人员所利用的处理软件，并免费共享。该程序使用方便，操作简单，只要按文中说明加以编辑，即可投入使用。     

强垂直温度梯度条件下强对流天气分析与潜势预报

采用19年3~9月常规探空观测资料,对南昌ΔT850-500≥27℃这种强垂直温度梯度与江西强对流天气过程的关系进行了相关分析,并将区域强对流天气、局部强对流天气、无强对流天气的3类情况下的中低层气压、温度、湿度、风场及稳定度进行分类合成分析,结果表明:当南昌ΔT850-500≥27℃时,且有天气系统作为触发条件时,江西强对流天气发生的概率达85%;中低层低槽和切变等影响系统、江南华南暖湿气流、河套地区的冷空气都有利于江西强对流天气出现。对典型个例的探空曲线和对流有效位能分析表明:强垂直温度梯度结合中低层高湿度是强对流天气发生的重要条件。在强对流天气潜势预报中,强垂直温度梯度有时比对流有效位能更有指示性。根据上述分析结果,建立了相应的预报流程,并在业务试用中取得较好的效果。     

Factors influencing determination of shale classification indices and their correlation to mechanical properties

The influence of sample preparation procedure on the measured classification indices such as clay-size fraction, liquid limit, and plastic limit of shales was investigated. Shale samples covering a wide range of composition and plasticity were tested using standard and modified preparation procedures to yield quantitative data required for this investigation. The study specifies the range of shale plasticity in which the measured values of clay-size fraction and liquid limit are sensitive to hydrometer specimen size and rehydration time, respectively. The study also revealed that the degree of shale particle disaggregation has an important influence on the measured clay-size fraction and liquid limit. This influence is maximized for shales with intermediate plasticity and can be interpreted in terms of particle size and shape. Correlations were established between classification indices derived from standard and modified sample preparation procedures. It is recommended to use these correlations to adjust shale classification indices derived from standard sample preparation procedures usually utilized by commercial laboratories. Such correlations help in creating a universally followed procedure for better estimation of shale engineering properties and reliable interpretation of case histories involving shale formations.     

浅谈应用软件安装程序的制作

本文论述了一个安装程序应具备的基本功能,介绍了常用的安装程序制作工具及其特点,并以流行的安装程序制作工具InstallShield为例,结合实例介绍了制作应用软件安装程序的方法与步骤。