MapX与Oracle Spatial技术集成应用--以青岛海岸带地质信息系统开发为例

介绍了“青岛市海岸带地质信息系统”开发研制的关键技术。运用Mapinfo软件及其拓展组件MapX作为系统GIS开发平台,Oracle Spatial作为数据库技术平台,Visual Basic作为二次开发工具,将GIS的空间分析、可视化查询和Oracle数据管理功能有机集成,开发出具有空间数据库和空间分析功能兼备的信息应用系统。上述技术也可在其它领域推广应用。     

变形监测数据处理方法的对比分析

本文介绍了长江中下游水患区沉降监测工程概况,对研究变形监测点位稳定性的方法做了分析研究。主要内容包括:利用最近三年的洞庭湖周边地区的水准数据,依次采用稳健估计法,平均间隙法,单点位移分量法对所选水准基准点的稳定性作定量分析并进行比较得出相关结论。     

Formulation of a unified constitutive model for clays and sands

This paper presents a new generalized effective stress model, referred to as MIT-S1, which is capable of predicting the rate independent, effective stress–strain–strength behaviour of uncemented soils over a wide range of confining pressures and densities. Freshly deposited sand specimens compressed from different initial formation densities approach a unique condition at high stress levels, referred to as the limiting compression curve (LCC), which is linear in a double logarithmic void ratio, e, mean effective stress space, p′. The model describes irrecoverable, plastic strains which develop throughout first loading using a simple four-parameter elasto-plastic model. The shear stiffness and strength properties of sands in the LCC regime can be normalized by the effective confining pressure and hence can be unified qualitatively, with the well-known behaviour of clays that are normally consolidated from a slurry condition along the virgin consolidation line (VCL). At lower confining pressures, the model characterizes the effects of formation density and fabric on the shear behaviour of sands through a number of key features: (a) void ratio is treated as a separate state variable in the incrementally linearized elasto-plastic formulation: (b) kinematic hardening describing the evolution of anisotropic stress–strain properties: (c) an aperture hardening function controls dilation as a function of ‘formation density’; and (d) the use of a single lemniscate-shaped yield surface with non-associated flow. These features enable the model to describe characteristic transitions from dilative to contractive shear response of sands as the confining pressure increases. This paper summarizes the procedures used to select input parameters for clays and sands, while a companion paper compares model predictions with measured data to illustrate the model capability for describing the shear behaviour of clays and sands. Copyright © 1999 John Wiley & Sons, Ltd.     

Solar radiative output and its variability: evidence and mechanisms

Electromagnetic radiation from the Sun is Earths primary energy source. Space-based radiometric measurements in the past two decades have begun to establish the nature, magnitude and origins of its variability. An 11-year cycle with peak-to-peak amplitude of order 0.1 % is now well established in recent total solar irradiance observations, as are larger variations of order 0.2 % associated with the Suns 27-day rotation period. The ultraviolet, visible and infrared spectral regions all participate in these variations, with larger changes at shorter wavelengths. Linkages of solar radiative output variations with solar magnetism are clearly identified. Active regions alter the local radiance, and their wavelength-dependent contrasts relative to the quiet Sun control the relative spectrum of irradiance variability. Solar radiative output also responds to sub-surface convection and to eruptive events on the Sun. On the shortest time scales, total irradiance exhibits five minute fluctuations of amplitude %, and can increase to as much as 0.015 % during the very largest solar flares. Unknown is whether multi-decadal changes in solar activity produce longer-term irradiance variations larger than observed thus far in the contemporary epoch. Empirical associations with solar activity proxies suggest reduced total solar irradiance during the anomalously low activity in the seventeenth century Maunder Minimum relative to the present. Uncertainties in understanding the physical relationships between direct magnetic modulation of solar radiative output and heliospheric modulation of cosmogenic proxies preclude definitive historical irradiance estimates, as yet.Received: 26 August 2004, Published online: 16 November 2004 Correspondence to: Claus Fröhlich     

空间异质性定量研究方法

空间异质性是景观生态学定量化研究的核心,其定量研究方法包括景观综合图、数学模型和地学信息图谱.本文概括总结了景观综合图的内容和定量化指标,分析了这种定量化方法的优势和局限;对数学模型的复杂性、优点和与景观综合图的互补性作了简要分析,指出了数学模型研究需要进一步探讨和重视的问题;通过对地学信息图谱三个阶段(景观制图实验,图谱概念的提出和地学信息图谱理论的形成)的回顾和对其特点的分析,我们认为地学信息图谱综合了景观综合图和抽象的数学模型可以提供的互补信息,吸收了两者的优点,是空间异质性的综合定量研究方法.     

基于MapX的工程测量信息系统设计与实现

采用GIS管理测量数据是提高城市勘测效率的重要基础。本文介绍了利用MapX组件开发广州市建设工程测量信息系统,实现了建设工程测量图形与属性数据之间的双向查询。侧重研究建设工程测量的数据组织形式,以及空间信息和属性信息之间的关联。实验证明,利用MapX组件能高效地建造建设工程测量信息系统;系统中的空间数据结构设计合理,能较好地实现建设工程测量数据的录入、查询以及综合管理等系统要求。     

GPU加速的改进PAM聚类算法研究与应用

空间聚类是空间数据挖掘的重要方法,而K-Medoids是一种常用的空间聚类算法。K-Medoids聚类算法存在初始点选择问题,而且计算复杂。为了提高算法的有效性和时间效率,本文结合模拟退火算法思想,改进了传统的K-Medoids算法PAM,提出一种基于GPU计算的并行模拟退火PAM算法。类比矩阵乘法运算,定义了一种新的矩阵计算方法,可以有效减少数据在GPU全局内存和共享内存之间的传输,提高了算法在GPU中的执行效率。利用模拟退火算法搜索聚类中心点,保证了聚类结果的全局最优性。基于不同的数据集,将串行和并行模拟退火PAM算法以及已有的遗传PAM算法进行比较,结果表明并行模拟退火PAM算法聚类结果正确,且时间效率高。最后,应用本文改进算法对贵州省安监系统的安全监管隐患数据进行聚类分析,发现了隐患聚集中心,相关结果对政府的决策具有一定的实际应用价值。     

A multi-equation spatial econometric model,with application to EU manufacturing productivity growth

A multi-equation spatial econometric model is used to explain variations across EU regions in manufacturing productivity growth based on recent theoretical developments in urban economics and economic geography. The paper shows that temporal and spatial parameter homogeneity is an unrealistic assumption, contrary to what is typically assumed in the literature. Constraints are imposed on parameters across time periods and between core and peripheral regions of the EU, with the significant loss of fit providing overwhelming evidence of parameter heterogeneity, although the final model does highlight increasing returns to scale, which is a central feature of contemporary theory.      

An alternative deduction of the hill-type surfaces of the spatial 3-body problem

In the present paper, inequalities stronger than Sundman's and the best possible zero velocity surfaces of the spatial 3-body problem first obtained by Saari (1987) are deduced using a modified version of the transformation developed by Zare (1976). The notion of inertia ellipsoid is used to show the equivalence of the present authors' result to that of Saari's.     

强震前地磁总场F02测值的空间相关特征研究

收集全国102个地磁台站2008年至2015年数字化地磁资料, 运用地磁空间相关法计算每日凌晨02时各台站地磁总场F之间的空间相关系数。 在使用相同的异常判别标准的情况下, 研究时段的17个中强地震中发现在2009年9月19日陕西宁强5.1级地震, 2011年11月1日四川青川5.4级地震, 2013年1月23日辽宁灯塔5.1级地震, 2013年7月22日甘肃岷县6.6级地震和2013年10月31日吉林前郭5.5级地震前均具有较为明显的空间相关低值异常现象。 通过总结5个震例的异常特征, 笔者发现其异常形态极其相似, 且平均的异常持续时间为20天, 而地震就发生在异常开始后3个月内; 同时, 地震发生在异常集中区中心附近, 且这个异常区域大小在500 km左右。 这一研究结果对于进一步分析地震前地磁空间相关异常特征积累了丰富的资料。