Alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands)

Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper.     

Deciphering polymetamorphic episodes in high-grade metamorphic orogens: Constraints from PbSL, Sm/Nd and Lu/Hf garnet dating of low- to high-grade metasedimentary rocks from the Kaoko belt (Namibia)

Three dating techniques for metamorphic minerals using the Sm–Nd, Lu–Hf and Pb isotope systems are combined and interpreted in context with detailed petrologic data from crustal segments in NW Namibia. The combination of isochron ages using these different approaches is a valuable tool to testify for the validity of metamorphic mineral dating. Here, PbSL, Lu–Hf and Sm–Nd garnet ages obtained on low- to medium-grade metasedimentary rocks from the Central Kaoko Zone of the Neoproterozoic Kaoko belt (NW Namibia) indicate that these samples were metamorphosed at around 550–560 Ma. On the other hand, granulite facies metasedimentary rocks from the Western Kaoko Zone underwent two phases of high-grade metamorphism, one at ca. 660–625 Ma and another at ca. 550 Ma providing substantial evidence that the 660–625 Ma-event was indeed a major tectonothermal episode in the Kaoko belt. Our age data suggest that interpreting metamorphic ages by applying a single dating method only is not reliable enough when studying complex metamorphic systems. However, a combination of all three dating techniques used here provides a reliable basis for geochronological age interpretation.     

Revised age of proximal deposits in the Zagros foreland basin and implications for Cenozoic evolution of the High Zagros

The regionally extensive, coarse-grained Bakhtiyari Formation represents the youngest synorogenic fill in the Zagros foreland basin of Iran. The Bakhtiyari is present throughout the Zagros fold-thrust belt and consists of conglomerate with subordinate sandstone and marl. The formation is up to 3000 m thick and was deposited in foredeep and wedge-top depocenters flanked by fold-thrust structures. Although the Bakhtiyari concordantly overlies Miocene deposits in foreland regions, an angular unconformity above tilted Paleozoic to Miocene rocks is expressed in the hinterland (High Zagros).

The Bakhtiyari Formation has been widely considered to be a regional sheet of Pliocene–Pleistocene conglomerate deposited during and after major late Miocene–Pliocene shortening. It is further believed that rapid fold growth and Bakhtiyari deposition commenced simultaneously across the fold-thrust belt, with limited migration from hinterland (NE) to foreland (SW). Thus, the Bakhtiyari is generally interpreted as an unmistakable time indicator for shortening and surface uplift across the Zagros. However, new structural and stratigraphic data show that the most-proximal Bakhtiyari exposures, in the High Zagros south of Shahr-kord, were deposited during the early Miocene and probably Oligocene. In this locality, a coarse-grained Bakhtiyari succession several hundred meters thick contains gray marl, limestone, and sandstone with diagnostic marine pelecypod, gastropod, coral, and coralline algae fossils. Foraminiferal and palynological species indicate deposition during early Miocene time. However, the lower Miocene marine interval lies in angular unconformity above ~ 150 m of Bakhtiyari conglomerate that, in turn, unconformably caps an Oligocene marine sequence. These relationships attest to syndepositional deformation and suggest that the oldest Bakhtiyari conglomerate could be Oligocene in age.

The new age information constrains the timing of initial foreland-basin development and proximal Bakhtiyari deposition in the Zagros hinterland. These findings reveal that structural evolution of the High Zagros was underway by early Miocene and probably Oligocene time, earlier than commonly envisioned. The age of the Bakhtiyari Formation in the High Zagros contrasts significantly with the Pliocene–Quaternary Bakhtiyari deposits near the modern deformation front, suggesting a long-term (> 20 Myr) advance of deformation toward the foreland.     

湘中奥陶纪锰矿带成矿特征及资源前景

湘中奥陶纪沉积锰矿带位于湖南省安化县、桃江县、宁乡县境内,呈近EW向展布,矿带内锰矿以质量好而著称。该成矿带的成锰沉积盆地受控于加里东期张性断裂系统,为一断陷盆地。盆地内发育一组NW向同沉积断裂,形成了一系列断陷槽,控制了沉积岩相的分布。锰矿主要产于盆地中心亚相的黑色页岩夹碳酸锰矿微相内。据矿带中锰矿的地质和地球化学特征以及微量元素和碳、氧、锶同位素组成,笔者认为,该锰矿属于热水沉积成因。综合对比表明,该成矿带具有良好的成矿条件和值得注意的资源潜力,有可能发展为大型锰成矿带。     

阿尔金南缘构造带西段辉绿岩墙群的地球化学特征及构造环境

对阿尔金南缘构造带西段辉绿岩墙群的岩石学和地球化学的详细研究表明,该区辉绿岩墙群为拉斑系列岩石,其主量元素以中等TiO2(1.19%～1.59%)、高MgO(5.51%～7.88%)、贫K2O(0.04%～0.84%)和P2O5(0.10%～0.20%)、Na2OK2O为特征;高场强元素(HFSE)丰度特征显示其为E-MORB型或过渡型玄武岩质岩石;稀土元素总量相对较高,轻重稀土元素分馏不显著[(La/Yb)N=1.93～3.61,LREE/HREE=3.01～4.10],在球粒陨石标准化配分模式图上呈略富集型.结合玄武岩构造环境判别图解综合分析推测,它们可能形成于一种裂谷向MORB环境过渡的构造环境,即初始小洋盆构造环境.     

辽宁省海洋环境保护与海岸带可持续开发利用

在分析综合辽宁省海岸带调查和沿海经济贝类污染监测资料基础上，根据辽宁海岸带水质，沉积物和生物污染现状及发展趋势。针对所存在的问题，讨论了辽宁省海洋污染特别是赤潮对海洋资源的破坏，并在组织机构，地方立法，海岸带环境保护规划，污染源控制与整体环境改进，监测方案等方面提出了建设海上辽宁、加强辽宁省海洋环境保护与海岸可持续开发利用的建议。     

浙江省海岛沿岸水域微生物生态分布

文章报道了浙江海岛沿岸水域中异养细菌、氨化细菌和反硝化细菌的数量分布及异养细菌的种群组成。结果表明：本调查海区异养细菌的数量较多，其数量分布范围在２．０４×１０４～８．３６×１０６个／ｄｍ３之间；氨化细菌数量分布范围在３．０×１０３～１．１×１０６个／ｄｍ３之间；反硝化细菌的数量分布范围在３．０×１０２～１．１－１０６个／ｄｍ３之间。细菌的数量与环境中营养盐的浓度之间存在密切关系。在不同的海区异养细菌的种群组成存在一定的差异，在浙北海区，革兰氏阴性菌所占比例为４１．６％，在浙中海区为４６．９％，在浙南海区为６４．９％。     

亚热带沿海景观的旅游保护性开发及建设探讨--以福建沿海为例

依据地貌学和风景学的角度,福建沿海景观以闽江口和九龙江口为界可分为3个景观亚区,并具有多样性与复杂性、动态性与脆弱性和关联性与分异性等特征.本文运用景观生态的原理研究沿海景观的构成与格局,在沿海景观的分类和特征概括的基础上,探讨福建沿海景观旅游开发与建设的模式.通过维护沿海景观系统的稳定,优化沿海各景观亚区的分布格局,提高沿海景观的整体舒适性和挖掘文化景观的内涵等应对措施以实现福建沿海旅游的科学发展.     

深圳发展东部滨海旅游度假区的前景探析

深圳具备优良的海滨旅游资源，但其滨海旅游特色一直体现得不够充分，滨海度假旅游品牌在全国以至海外的影响力还很有限。深圳最近对东部滨海地区的发展进行了总体规划，根据深圳东部滨海地区发展现状和发展规划，就开发深圳东部滨海旅游度假胜地、将东部滨海旅游度假区打造成为具有国际水准的、以滨海休闲度假为特色的黄金海岸旅游胜地提出了的几点建议。     

基于非期望产出的中国滨海旅游生态效率评价——以我国沿海城市为例

旅游生态效率是反映旅游经济与旅游环境双向效应(bi-effect)的重要判断指标。本文基于非期望产出视角,采用超效率SBM模型,评价了我国东部沿海18个主要滨海旅游城市的旅游生态效率,并分析了其时空演变特征。研究结果表明:(1)中国东部沿海18市滨海旅游生态效率整体呈中等水平,平均值处于0.727～0.894,阶段特征明显,呈现前期平稳发展,中期下降,后期回升的发展趋势;(2)各城市滨海旅游生态效率水平差异显著,分为下行风险型,持续成长型,稳定型和波动型4种发展类型。平均效率值最高为天津,最低为三亚;(3)分解效率均值中纯技术效率较高,规模效率次之,技术进步是影响综合效率的主要因素;(4)投入冗余和非期望产出冗余已经成为阻碍滨海旅游生态效率进步的关键因素。