Determination of Sr/Sr mass-dependent isotopic fractionation and radiogenic isotope variation of Sr/Sr in the Neoproterozoic Doushantuo Formation

We measured both mass-dependent isotope fractionation of δ⁸⁸Sr (⁸⁸Sr/⁸⁶Sr) and radiogenic isotopic variation of Sr (⁸⁷Sr/⁸⁶Sr) for the Neoproterozoic Doushantuo Formation that deposited as a cap carbonate immediately above the Marinoan-related Nantuo Tillite. The δ⁸⁸Sr and ⁸⁷Sr/⁸⁶Sr compositions showed three remarkable characteristics: (1) high radiogenic ⁸⁷Sr/⁸⁶Sr values and gradual decrease in the ⁸⁷Sr/⁸⁶Sr ratios, (2) anomalously low δ⁸⁸Sr values at the lower part cap carbonate, and (3) a clear correlation between ⁸⁷Sr/⁸⁶Sr and δ⁸⁸Sr values. These isotopic signatures can be explained by assuming an extreme greenhouse condition after the Marinoan glaciation. Surface seawater, mixed with a large amount of freshwater from continental crusts with high ⁸⁷Sr/⁸⁶Sr and lighter δ⁸⁸Sr ratios, was formed during the extreme global warming after the glacial event. High atmospheric CO₂ content caused sudden precipitation of cap carbonate from the surface seawater with high ⁸⁷Sr/⁸⁶Sr and lighter δ⁸⁸Sr ratios. Subsequently, the mixing of the underlying seawater, with unradiogenic Sr isotope compositions and normal δ⁸⁸Sr ratios, probably caused gradual decrease of the ⁸⁷Sr/⁸⁶Sr ratios of the seawater and deposition of carbonate with normal δ⁸⁸Sr ratios. The combination of ⁸⁷Sr/⁸⁶Sr and δ⁸⁸Sr isotope systematics gives us new insights on the surface evolution after the Snowball Earth.     

In situ estimation of the effective chemical diffusion coefficient of a rock matrix in a fractured aquifer

An in situ method of estimating the effective diffusion coefficient for a chemical constituent that diffuses into the primary porosity of a rock is developed by abruptly changing the concentration of the dissolved constituent in a borehole in contact with the rock matrix and monitoring the time-varying concentration. The experiment was conducted in a borehole completed in mudstone on the campus of the University of the Free State in Bloemfontein, South Africa. Numerous tracer tests were conducted at this site, which left a residual concentration of sodium chloride in boreholes that diffused into the rock matrix over a period of years. Fresh water was introduced into a borehole in contact with the mudstone, and the time-varying increase of chloride was observed by monitoring the electrical conductivity (EC) at various depths in the borehole. Estimates of the effective diffusion coefficient were obtained by interpreting measurements of EC over 34 d. The effective diffusion coefficient at a depth of 36 m was approximately 7.8×10^?6 m²/d, but was sensitive to the assumed matrix porosity. The formation factor and mass flux for the mudstone were also estimated from the experiment.     

Estimating hydraulic conductivity using grain-size analyses, aquifer tests, and numerical modeling in a riverside alluvial system in South Korea

Hydraulic conductivity (K) for an alluvial system in a riverbank filtration area in Changwon City, South Korea, has been studied using grain-size distribution, pumping and slug tests, and numerical modeling. The alluvial system is composed of layers: upper fine sand, medium sand, lower fine sand, and a highly conductive sand/gravel layer at the base. The geometric mean of K for the sand/gravel layer (9.89?×?10^?4 m s^?1), as determined by grain-size analyses, was 3.33 times greater than the geometric mean obtained from pumping tests (2.97?×?10^?4 m s^?1). The geometric mean of K estimates obtained from slug tests (3.08?×?10^?6 m s^?1) was one to two orders of magnitude lower than that from pumping tests and grain-size analyses. K estimates derived from a numerical model were compared to those derived from the grain-size methods, slug tests and pumping tests in order to determine the degree of deviation from the numerical model. It is considered that the K estimates determined by the slug tests resemble the uppermost part of the alluvial deposit, whereas the K estimates obtained by grain-size analyses and pumping tests are similar to those from the numerical model for the sand/gravel layer of the riverside alluvial system.     

New basin modelling results from the Polish part of the Central European Basin system: implications for the Late Cretaceous–Early Paleogene structural inversion

Combined subsidence and thermal 1D modelling was performed on six well-sections located in the north-western Mid-Polish Trough/Swell in the eastern part of the Central European Basin system. The modelling allowed constraining quantitatively both the Mesozoic subsidence and the magnitude of the Late Cretaceous–Paleocene inversion and erosion. The latter most probably reached 2,400 m in the Mid-Polish Swell area. The modelled Upper Cretaceous thickness did not exceed 500 m, and probably corresponded to 200–300 m in the swell area as compared with more than 2,000 m in the adjacent non-inverted part of the basin. Such Upper Cretaceous thickness pattern implies early onset of inversion processes, probably in the Late Turonian or Coniacian. Our modelling, coupled with previous results of stratigraphic and seismic studies, demonstrates that the relatively low sedimentation rates in the inverted part of the basin during the Late Cretaceous were the net result of several discrete pulses of non-deposition and/or erosion that were progressively more pronounced towards the trough axis. The last phase of inversion started in the Late Maastrichtian and was responsible for the total amount of erosion, which removed also the reduced Upper Cretaceous deposits. According to our modelling results, a Late Cretaceous heat-flow regime which is similar to the present-day conditions (about 50 mW/m²) was responsible for the observed organic maturity of the Permian-Mesozoic rocks. This conclusion does not affect the possibility of Late Carboniferous–Permian and Late Permian–Early Triassic thermal events.     

海拉尔盆地乌尔逊凹陷与松辽盆地孤店CO2气田含片钠铝石砂岩的岩石学特征

海拉尔盆地乌尔逊凹陷南屯组与松辽盆地孤店CO₂气田泉头组发育大量含片钠铝石砂岩。通过偏光显微镜、扫描电镜、茜素红-S染色、X射线衍射、电子探针与INCA能谱分析等,对含片钠铝石砂岩的骨架碎屑组分、胶结物与自生矿物、成岩共生序列等岩石学特征进行了系统研究。研究表明,含片钠铝石砂岩的岩石类型为长石砂岩和岩屑长石砂岩,粒度以细粒、细-中粒为主,分选差-中等。砂岩中胶结物主要为次生加大石英、自生石英、片钠铝石、铁白云石和粘土矿物。其中,片钠铝石最高可达砂岩总体积的22％在砂岩中或以放射状、束状、菊花状、杂乱毛发状、毛球状、板状等集合体充填孔隙,或呈束状和板状交代长石和岩屑。电子探针与INCA能谱综合分析表明,片钠铝石主要由Na、Al、O、C等组成。在含片钠铝石砂岩中,成岩共生序列依次为粘土矿物包壳-次生加大石英、自生石英、自生高岭石-油气充注-CO₂充注-片钠铝石-铁白云石。其中,CO₂注入前形成的自生矿物组合主要为次生加大石英、自生石英和自生高岭石,CO₂注入后形成的自生矿物组合主要为片钠铝石和铁白云石。     

姬塬油田长4＋5砂岩储层孔隙类型与成岩作用

通过常规物性、岩石及铸体薄片、重矿物、X射线衍射、扫描电镜等多项测试方法,对鄂尔多斯盆地姬塬油田长4 5含油砂体的岩石学特征、成岩作用、储集类型进行了分析和研究。长4 5储层孔隙主要以粒间孔和长石溶孔为主,粒间溶孔次之,孔隙组合一般以粒间孔和溶孔-粒间孔为主。本区破坏性成岩作用包括机械压实作用、石英及长石的次生加大、碳酸盐胶结作用等,其中压实作用是造成本区砂岩原生孔隙大量丧失的主要原因。建设性成岩作用为溶蚀作用、绿泥石粘土膜形成作用,但溶蚀作用产生的次生孔隙对储层物性的改善不足。     

Geostatistical analysis of arsenic concentration in the groundwater of Malda district of West Bengal, India

The problem of arsenic (As) poisoning in the upper deltaic plain of the Ganga-Bhagirathi river system in the Bengal Basin of West Bengal, India is an alarming issue. Four blocks (Kaliachak-1, 2, 3 and English Bazar) of Malda district, West Bengal were critically studied. Geomorphologically, the area exhibits three terraces: the present Youngest terrace (T₀-terrace), the Older Shaugaon Surface (T₁-terrace) and the Oldest Baikunthapur Surface (T₂-terrace). On the basis of numerous measurements, including As-content, pH, DO, specific conductivity and salinity, it was observed that maximum As-content beyond the permissible limit (0.05 mg/L, Indian standard) occurs within a depth range of 10–30 m with a non-linear distribution pattern. Variance test also found that a block effect was highly significant in an As-distribution pattern. Mean arsenic level of Kaliachak block-1 is 0.2253 mg/L, followed by Kaliachak-2 with arsenic level 0.1923, Kaliachak-3 with arsenic level 0.1755 and English Bazar with arsenic level 0.1324. The arsenious belt lies mainly within the Older terrace (T₁). The very recent flood plain deposits of silvery white, fine sands lying very close to the Ganga River margin do not contain significant amounts of As. Elevated As-concentration in the ground water was observed in alluvial sands, grayish white to brownish in color and occurring away from the Ganga margin. The Oldest terrace (T2) further away from the Ganga margin (e.g. English Bazar) and Barind surface contains less arsenic. Barind surface acts as a hard capping with ferruginous sands and lateritic concretions-chocolate, mottled and purple brown in color-occurring northeast of the studied area. Arsenic content of ground water in the same locality within a radius of ∼ 20 m varies within wide limits. Thus, it poses problem to delineate its distribution pattern. Such a patchy occurrence possibly could not be explained satisfactorily solely by geomorphology. Chemical analysis of aquifer clay samples of the cores shows a maximum Ascontent of up to 3 mg/kg, whereas the bulk samples (sandclay mixture) of the cores contain a maximum of 17 mg/kg As-value. Therefore, it is not always true that clay contains elevated As-value.     

鄂尔多斯盆地靖边气田马五_(1+2)气藏储集单元研究

综合地震、地质、测井等信息,考虑沉积、成岩、地貌、生产动态等多因素,在沟槽识别和致密带研究基础上,通过井间干扰、油层压力变化和试井边界响应分析,按照局部、就近原则对靖边气田马五1+2气藏进行了储集单元划分。共划分出111个储集单元,其中独立型69个,复合型42个。这些储集单元的面积多介于10～50km2之间,单个储集单元的井数一般少于6口。在对气藏储层特征综合认识的基础上,确定流动单元划分思路与流程,并认为关键环节包括古沟槽识别、致密带研究、动静结合确定储集单元等3个方面。储集单元一方面受控于被致密岩相包围的有利成岩相带,宏观上与弱—中等充填泥粉晶白云岩相对应性好;另一方面又受各级古沟槽夹持,在两个一级古沟槽之间往往共生多个储集单元,而这些储集单元边界又严格地受二级或三级沟槽切割控制。     

评“河南西峡盆地产恐龙蛋地层研究新进展”

＂河南西峡盆地产恐龙蛋地层研究新进展＂一文主张用＂走马岗组＂、＂赵营组＂和＂六爷庙组＂来替代正式命名的一套地层名称,这样做既不符合地层命名原则,又易引起新的不必要的混乱。在晚白垩世时西峡、淅川两盆地在岩性组合特征上是相似的,浙川盆地并不是＂岩性特征简单＂,西峡盆地也不是＂岩性复杂＂。西峡盆地晚白垩世＂红层＂应采用＂高沟组、马家村组和寺沟组＂这套地层名称。