新型半主动调谐质量阻尼器减震性能的数值模拟

为了改良被动式调谐质量阻尼器(TMD)对建筑结构的减震效果,本文提出了一种新型的可实时调节频率和电涡流阻尼的半主动调谐质量阻尼器(SATMD)。由Hilbert-Huang变换(HHT)识别出结构的瞬时频率,通过基于HHT的控制算法实时调节SATMD的质量进行频率的调谐;通过基于线性二次型高斯(LQG)的控制算法实时调整磁导间距来调节电涡流阻尼系数。为了验证SATMD对建筑结构的减震效果,以一单自由度结构模型为例进行地震响应模拟,同时采用一经优化设计的被动TMD作为对比,并考虑由于主结构的累积损伤等引起自身频率下降而造成被动TMD的去谐效应。以主结构的加速度和位移时程峰值、整体均方根值及TMD的耗能性能作为评价指标,对比了SATMD在主结构发生损伤前后对被动TMD的改良效果。数值模拟结果表明,在主结构发生损伤前后,SATMD均比经优化设计的被动TMD有更好的减震效果及耗能能力。     

A novel bidirectional pendulum tuned mass damper using variable homogeneous friction to achieve amplitude-independent control

Passive tuned mass dampers (TMDs) are widely used in controlling structural vibrations. Although their principle is well established, the search for improved arrangements is still under way. This effort has recently produced an innovative paradigm of bidirectional pendulum TMD (BTMD) that, moving along a specially designed three-dimensional (3D) surface, can simultaneously control two in-plane orthogonal structural modes. In existing versions of BTMDs, energy dissipation is provided either by ordinary horizontal viscous dampers or by an original arrangement of vertical friction dampers. In this paper, a new paradigm is proposed, in which energy dissipation comes from the tangential friction arising along the pendulum surface out of an optimal spatially variable friction coefficient pattern. Within this paradigm, if the friction coefficient is taken proportional to the modulus of the pendulum surface gradient, the dissipation model results nonlinear homogeneous in the small-displacement domain, and the performance of the absorber, herein called the homogeneous tangential friction BTMD (HT-BTMD), results independent from the excitation level. The present work introduces this concept, derives the analytical model of the HT-BTMD, establishes a method for its optimal design, and numerically verifies its seismic effectiveness in comparison with viscously damped devices. The validity and feasibility of the concept are demonstrated through experimental tests on a small-scale lab prototype, which also show the efficacy of a stepwise approximation of the homogeneous friction pattern. The new device proves a competing alternative to existing BTMDs, and homogeneous tangential friction proves a promising new paradigm to provide pendular systems with amplitude-independent structural damping.     

Evaluation of force-based and displacement-based out-of-plane seismic assessment methods for unreinforced masonry walls through refined model simulations

The performance of force-based and displacement-based seismic assessment methods for the life-safety limit state check of out-of-plane loaded unreinforced masonry walls is evaluated on the basis of refined numerical simulations. For this purpose, a discrete element model of a vertically spanning wall is built and validated against experimental results from static and dynamic test conditions. The model is then analysed for a large range of wall configurations. For each configuration, a static pushover analysis and a series of incremental dynamic analyses are run, the latter permitting to determine the capacity of the wall under dynamic loading. The accuracy of the assessment methods in predicting the acceleration at which the walls collapse is evaluated. It is found that the displacement-based method is more accurate, robust, and safe than the force-based method. The comparison also shows that for walls characterised by a relatively high ratio of axial load to Euler's critical load, both assessment methods lead to an overestimation of the wall capacity. As a remedy, a modification to the methods based on a recently developed mechanical model is put forward and tested. For the force-based method, it is additionally suggested to set for walls with relatively high overburden ratios the behaviour factor equal to 1. To ensure reproducibility of this study, all input and output files of the numerical simulations are made publicly available.     

基于无人机倾斜摄影的强震区公路高位危岩崩塌形成机制及稳定性评价

强震区公路高位危岩崩塌具有极高隐蔽性和危害性,传统的接触式勘察方法难以有效调查震后位于公路两侧高陡斜坡体上的危岩崩塌体。提出一种基于无人机的倾斜摄影测量技术,该技术采用无人机超低空采集高位危岩体的高清影像数据,构建三维空间模型,从而提取危岩体特征参数,为危岩体稳定性分析提供数据支撑。利用无人机对某高速公路危岩崩塌地质灾害路段进行调查,对无人机倾斜摄影测量成果进行分析,明确调查区19处危岩崩塌体特征和崩塌成因机制,在此基础上评价典型崩塌体稳定性。并且使用RocFall软件模拟分析典型危岩体崩落运动轨迹,研究高位危岩崩塌对公路的危险性。研究成果对强震区山区公路高位危岩崩塌勘察、稳定性评价工作具有重要的参考价值。     

中等质量富金属AGB长周期变星的振动研究

本文采用恒星演化计算与恒星振动计算相结合的方法，对中等质量富金属恒星演化到渐近巨星分支时的振动性质进行了分析研究，从理论上得出这类恒星的振动方式是处于一阶谐频振动，而振动的激发则是在氢电离区和氦的二次电离区由多种机制共同作用造成的，同时提出很长周期的ＡＧＢ长周期变星只能是由中等质量恒星演化到ＡＧＢ阶段形成的。我们的理论计算结果还比较支持在ＡＧＢ顶端存在巨大星风物质损失的观点，且这种星风物质损失很可能与恒星振动有关。     

机械连接预应力实心方桩承台节点抗震性能试验研究

预应力管桩在高烈度抗震设防地区已禁用,而普通钢筋混凝土方桩成本较高。首先针对卡扣式机械连接预应力混凝土实心方桩、PHC管桩和普通钢筋混凝土方桩与承台处的节点进行拟静力试验,并利用试验数据针对Park-Ang损伤模型进行了修正,进行了损伤指数分析。研究结果表明:预应力方桩比普通钢筋混凝土方桩的抗裂性能明显好,而预应力混凝土实心方桩承台节点耗能能力和延性低于预应力管桩和普通钢筋混凝土方桩;截桩施工导致桩端部损失部分预应力,相比较未截桩试件屈服荷载和极限荷载均减小,节点裂缝开展较早,损伤较未截桩试件严重;增配普通钢筋试件的滞回曲线比较饱满,水平承载能力和位移延性得到提升,节点抗震性能得到提升与改善;预应力混凝土实心方桩损伤前期较小,而一旦发生损伤后,损伤指数发展较快。     

Clean quartz matters for cosmogenic nuclide analyses: An exploration of the importance of sample purity using the CRONUS-N reference material

Reference materials are key for assessing inter-laboratory variability and measurement quality, and for placing analytical uncertainty bounds on sample analyses. Here, we investigate four years of data resulting from repeated processing of the CRONUS-N reference material for cosmogenic ¹⁰Be and ²⁶Al analyses. At University of Vermont, we prepared a CRONUS-N aliquot with most of our sample batches from 2013 to 2017; these reference material samples were then distributed to four different accelerator mass spectrometry facilities, yielding 73 ¹⁰Be analyses and 58 ²⁶Al analyses. We determine CRONUS-N ¹⁰Be concentrations of (2.26 ± 0.14) x 10⁵ atoms g⁻¹ (n = 73, mean, 1 SD) and ²⁶Al concentrations of (1.00 ± 0.08) x 10⁶ atoms g⁻¹ (n = 58, mean, 1 SD). We find a reproducibility of 6.3% for ¹⁰Be and 7.7% for ²⁶Al (relative standard deviations). We also document highly variable ²⁷Al and Mg concentrations and a ¹⁰Be dispersion twice as large as the mean AMS analytic uncertainty. Analyses of the CRONUS-N material with and without density separation demonstrate that non-quartz minerals are present in the material and have a large impact on measured concentrations of ²⁷Al, ¹⁰Be, and impurities; these non-quartz minerals represent only a very small portion of the total mass (0.6–0.8%) but have a disproportionally large effect on the resulting data. Our results highlight the importance of completely removing all non-quartz mineral phases from samples prior to Be/Al extraction for the determination of in situ cosmogenic ¹⁰Be and ²⁶Al concentrations.     

Identification of modal parameters of a 600-m-high skyscraper from field vibration tests

Accurate prediction of the dynamic responses of a high-rise building subjected to dynamic loads such as earthquake and wind excitations requires the information of its structural dynamic properties such as modal parameters including natural frequencies and damping ratios. This paper presents the identification results of the modal parameters based on field vibration tests on a 600-m high skyscraper. A set of tests, including ambient vibration test (AVT) and free vibration test (FVT), were conducted on the skyscraper to identify its modal parameters. Firstly, this paper presents and discusses the modal parameters of the skyscraper assessed by several identification methods applied to the AVT measurements. These methods include the wavelet transform (WT) method, the stochastic subspace identification (SSI) method, and the random decrement technique (RDT). Secondly, an active mass damper (AMD) system with total mass 1000 tons equipped into the skyscraper was used to excite the building for estimation of the modal parameters by FVT. Thirdly, this paper presents observations on the structural dynamic behavior of the skyscraper with the operation of the AMD system during a typhoon event. The field measurement results show that the AMD system functioned efficiently for suppression of the wind-induced vibrations of the skyscraper during the typhoon. This paper aims to further understand the structural dynamic properties of super-tall buildings and provide useful information for structural design and vibration control of future skyscrapers.     

Seismic effectiveness of tuned mass dampers considering soil–structure interaction

This paper presents how soil–structure interaction affects the seismic performance of Tuned Mass Dampers (TMD) when installed on flexibly based structures. Previous studies on this subject have led to inconsistent conclusions since the soil and structure models employed considerably differ from each other. A generic frequency-independent model is used in this paper to represent a general soil–structure system, whose parameters cover a wide spectrum of soil and structural characteristics. The model structure is subjected to a stationary random excitation and the root-mean-square responses of engineering interest are used to measure the TMD's performance. Extensive parametric studies have shown that strong soil–structure interaction significantly defeats the seismic effectiveness of TMD systems. As the soil shear wave velocity decreases, TMD systems become less effective in reducing the maximum response of structures. For a structure resting on soft soil, the TMD system can hardly reduce the structural seismic response due to the high damping characteristics of soil–structure systems. The model structure is further subjected to the NS component of the 1940 El Centro, California earthquake to confirm the TMD's performance in a more realistic environment. Copyright © 1999 John Wiley & Sons Ltd.     

Multi-scale limit load analysis for discontinuous rock mass based on the homogenization method

A new method to evaluate the strength of rock mass structures is proposed and examined. The method is based on the collapse load analysis of elasto-perfectly plastic material along with the homogenization method, which enables the multi-scale analyses for heterogeneous media. The homogenization process replaces a rock mass with cracks by an equivalent continuum medium with macroscopic stiffness while the failure criterion for the rock mass is estimated in the localization process. It is shown that both the averaged stiffness and the macroscopic failure criterion of the discontinuous rock mass are numerically obtained via the finite element analyses. Thus, the failure strength of a rock mass structure is evaluated by the collapse load analysis in the form of Linear Programming with the macroscopic failure criterion. This is the first attempt to apply the homogenization method to the strength analysis of rock mass. Copyright © 1999 John Wiley & Sons, Ltd.