非均匀月壤介质的被动微波辐射传输模拟

基于非均匀月壤物理模型和辐射传输方程,模拟月壤介质中的微波辐射传输特性,探讨频率、月壤厚度等与月表亮温的关系。结果表明:在低频段,月壤微波辐射亮温的动态变化范围较大,可探测的月壤厚度大,3 GHz时的最大可探测月壤厚度达12.4 m;在高频段对应的可探测月壤厚度较小,特别是从50GHz往后的频率段内,最大可探测月壤厚度均小于2 m。不同频率的亮温-厚度变化曲线没有交叉点,且频率越高,所能探测的月壤厚度越小。根据模拟结果,建立了月壤厚度与亮温的查找表。基于查找表,利用单个波段的亮温数据即可得到月壤厚度信息。     

小波边缘分析建模波阻抗反演方法在煤层解释中的应用

受限于地震波主波长的1／4,常规地震处理难以分辨较薄煤层。基于模型的波阻抗反演虽然克服了厚、薄煤层计算问题．但因难以得到准确的高频部分,很多情况下反演结果的精度和分辨率往往不能满足地质预测的要求。小波边缘分析建模波阻抗反演方法是从地震数据中提取地震特征参数,用于建模并参与迭代反演。该方法即可以弥补反演过程中高频成分的误差,减少对钻井数据的依赖程度,得到较为合理的初始模型,又可提高反演的精度和分辨率．使反演结果更好的反映实际地下地质情况。利用该方法,对大井-将军庙及新疆红沙泉2个勘探区的侏罗系中统西山窑组含煤地层进行波阻抗反演,反演结果与钻井资料进行比较,其中大井一将军庙0802及0809号孔单煤层厚度误差分别为3％、8％．新疆红沙泉多煤层厚度及煤层之间的夹层厚度预测结果除B6煤层误差较大外,其它误差均小于7％．可见该反演方法的计算结果比较准确。     

三维地震属性参数在煤层厚度预测中的应用

依托“西部煤炭资源高精度三维地震勘探技术”项目工程,对晋城某矿南翼大巷东南区5m×5m×1ms的三维地震数据体,采用三维地震属性参数预测煤层厚度及其变化规律：沿3煤层、15煤层10ms时窗提取地震属性42种,根据钻孔资料,计算出煤厚与地震属性相关系数;从中优选出相关系数大于0．35的地震属性,其中3煤层9个、15煤层10个;然后进行地震属性互相关分析,优选出与3煤、15煤层厚度相关系数较大的4种属性,建立预测煤厚的BP神经网络模型,分别选取3煤层12个、15煤层4个实测数据作为学习训练和测试样本,以钻孔地震属性作为学习样本,对网络进行训练,最终获得全区煤层厚度。经与预留钻孔成果资料对比,预测精度较高,结果可用。     

地震勘探测量数据的快速处理和管理

目前山区地震测量施工主要的困难体现在山区放样难、内业数据处理复杂、测量成果无法进行异常检查等方面,其严重影响后续资料处理和解释质量。针对以上难点,利用AUTOCAD为平台,开发了一套物探测量数据处理系统。该系统具有展点、点内插、绘制测线剖面图、管理测点信息、打印成果报表等功能,实现了地震勘探测量数据的快速处理及有效检核．提高了野外测量放样的施工效率和数据的准确度。另外其图层管理及系统辅助功能,还可为地震勘探施工设计提供参考。     

Non-Linear Theory and Power-Law Models for Information Integration and Mineral Resources Quantitative Assessments

Singular physical or chemical processes may result in anomalous amounts of energy release or mass accumulation that, generally, are confined to narrow intervals in space or time. Singularity is a property of different types of non-linear natural processes including cloud formation, rainfall, hurricanes, flooding, landslides, earthquakes, wildfires, and mineralization. The end products of these non-linear processes can be modeled as fractals or multifractals. Hydrothermal processes in the Earth’s crust can result in ore deposits characterized by high concentrations of metals with fractal or multifractal properties. Here we show that the non-linear properties of the end products of singular mineralization processes can be applied for prediction of undiscovered mineral deposits and for quantitative mineral resource assessment, whether for mineral exploration or for regional, national and global planning for mineral resource utilization. In addition to the general theory and framework for the non-linear mineral resources assessment, this paper focuses on several power-law models proposed for characterizing non-linear properties of mineralization and for geoinformation extraction and integration. The theories, methods, and computer system discussed in this paper were validated using a case study dealing with hydrothermal Au mineral potential in southern Nova Scotia, Canada.     

New basis for the constitutive modelling of aggregated soils

Natural and compacted soils are usually characterized by aggregation of particles. The mechanical behaviour of these materials depends on soil structure. The oedometric compression tests performed on aggregated samples presented here showed that these materials exhibit a yield limit depending not only on stress history and stress state but also on soil structure. Evidence is provided using the neutron tomography technique. These results revealed that soil structure modification occurs together with plastic deformations. The experimental results are used to propose a new state parameter to quantify the soil structure. Based on pore-scale experimental observations, an evolution law for this parameter is proposed as a function of associated plastic strains. Considering both soil fabric and inter-particle bonding effects, a new yield limit depending on stress state, stress history and soil structure is introduced for the aggregated soils. Accordingly, a new constitutive framework consistent with strain hardening plasticity is proposed to consider soil structure effects in the modelling of aggregated soils.     

Hierarchical decomposition of variance with applications in environmental mapping based on satellite images

A quadtree-based image segmentation procedure (HQ) is presented to map complex environmental conditions. It applies a hierarchical nested analysis of variance within the framework of multiresolution wavelet approximation. The procedure leads to an optimal solution for determining mapping units based on spatial variability with constraints on the arrangement and shape of the units. Linkages to geostatisiics are pointed out, but the HQ decomposition algorithm does not require any homogeneity criteria. The computer implementation can be parameterized by either the number of required mapping units or the maximum within-unit variance, or it can provide a spectrum of significances of nested ANOVA. The detailed mathematical background and methodology is illustrated by a salt-affected grassland mapping study (Hortobágy, Hungary), where heterogeneous environmental characteristics have been sampled and predicted based on remotely sensed images using these principles.     

The development of radio astronomy at Hartebeesthoek

The development of radio astronomy at the Hartebeesthoek Radio Astronomy Observatory in South Africa is described. The Hartebeesthoek site was established originally by NASA as one of three Deep Space Stations equipped with 26-m parabolic reflector antennas. It was first used for radio astronomy by South Africa in terms of the NASA host nation agreement which allowed for its use at times when the facility was not needed for its primary purpose of tracking space probes. After NASA withdrew from South Africa in 1975, the South African Council for Scientific and Industrial Research took over the site and the 26-m parabolic reflector antenna, which NASA had abandoned in position, and established it as a national observatory. The development of the facility to the stage where it could support a variety of observing programmes such as continuum observations and mapping, spectroscopy and pulsar timing is described as well as the role played by the Observatory in global programmes of very long baseline interferometry.     

Geochemical mapping using a geomorphologic approach based on catchments

The Extended Sample Catchment Basin (ESCB) mapping technique, discussed in this paper, can be used to display the spatial distribution of geochemical variables measured in stream sediments taking into consideration the geomorphologic settings and the hydrographic patterns of surveyed areas. This approach is based on the association of an area of statistical representativeness with each sample, and on the assumption that the concentrations measured in the stream sediments can be considered as average reference values for this area.ESCBs can be easily identified considering the position of the sampling points within the hydrographic network and using the confluences between the streams of highest rank as break points for representing changes of the geochemical background. This approach, different from the traditional geostatistical and deterministic ones, does not consider the Euclidean distance among the sampling points as a measure of geochemical similarity but only refers to their functional relationship along the streams (following the water and the sediment flow) to measure their proximity.ESCBs can be seen as a specific development of previous techniques based on catchments and proves to be especially useful for supporting land planning in a preliminary survey phase while it is not specifically suitable for the identification of point sources of geochemical anomalies.Due to the fractal nature of the hydrographic network, all the procedures can be driven in a GIS environment by using digital terrain models apart from their spatial resolution.     

Effect of polypropylene fibre and lime admixture on engineering properties of clayey soil

In order to reduce the brittleness of soil stabilized by lime only, a recent study of a newly proposed mixture of polypropylene fibre and lime for ground improvement is described and reported in the paper. To investigate and understand the influence of the mixture of polypropylene fibre and lime on the engineering properties of a clayey soil, nine groups of treated soil specimens were prepared and tested at three different percentages of fibre content (i.e. 0.05%, 0.15%, 0.25% by weight of the parent soil) and three different percentages of lime (i.e. 2%, 5%, 8% by weight of the parent soil). These treated specimens were subjected to unconfined compression, direct shear, swelling and shrinkage tests. Through scanning electron microscopy (SEM) analysis of the specimens after shearing, the improving mechanisms of polypropylene fibre and lime in the soil were discussed and the observed test results were explained. It was found that fibre content, lime content and curing duration had significant influence on the engineering properties of the fibre–lime treated soil. An increase in lime content resulted in an initial increase followed by a slight decrease in unconfined compressive strength, cohesion and angle of internal friction of the clayey soil. On the other hand, an increase in lime content led to a reduction of swelling and shrinkage potential. However, an increase in fibre content caused an increase in strength and shrinkage potential but brought on the reduction of swelling potential. An increase in curing duration improved the unconfined compressive strength and shear strength parameters of the stabilized soil significantly. Based on the SEM analysis, it was found that the presence of fibre contributed to physical interaction between fibre and soil whereas the use of lime produced chemical reaction between lime and soil and changed soil fabric significantly.