赤峰—朝阳地区金矿成矿物理化学条件研究

系统论述了区内各大类金矿的成矿温度，成矿压力，各种气体的逸度、ｐＨ值，金离子及其配合物的活度，讨论了金的迁移形式，推测了区内各类矿液中金的沉淀机制。     

江苏某材料厂周边农田土壤钼污染特征及农作物健康风险评价（84）

为了解江苏某材料厂金属冶炼活动引发的重金属污染风险,采集周围农田土壤、小麦和水稻籽实样品,确定Mo含量及其在土壤中的形态,采用地质累积指数和富集因子指标评价土壤中钼的污染风险,采用健康风险指数评价小麦、稻米中Mo的健康风险。结果表明,农田土壤中Mo含量在0.50～63.2 mg/kg之间,其平均值5.70 mg/kg远高于全省平均值0.65 mg/kg,表层土壤出现了中度—高度富集,近70%的样点受到不同程度的钼污染,污染范围距该厂300 m,污染深度>1.5 m。土壤中的Mo具有较高的生物有效性,在小麦、水稻籽实中显著富集,主要与土壤具有较高的全Mo含量以及土壤呈碱性有关。基于EPA的健康风险评估方法,食用当地稻米、小麦会产生较大的健康风险。     

内蒙古达塞脱东区土壤地球化学异常特征及找矿效果

内蒙古达塞脱东区位于锡林浩特—东乌旗多金属成矿带东段,成矿地质条件有利,但地表基岩出露少,第四系大片覆盖,找矿难度大。土壤地球化学测量从西到东圈定出三个SN向异常带,依据元素组合特征和分带理论,指出Ⅰ号异常带和Ⅱ号异常带东侧异常处于矿体前缘晕,Ⅲ号异常带处于矿体中前部,Ⅱ号异常带西侧异常处于矿体尾晕,异常存在较明显的水平分带性,推测矿体剥蚀程度存在由浅到深的变化趋势,后期地表槽探和钻探已在Ⅰ、Ⅱ号异常带分别发现了2个银多金属矿体和1个铅锌矿化体,且矿（化）体赋存部位、展布方向、规模与化探异常吻合性很好,化探工作在该区取得了很好的找矿效果。     

Application of numerical modelling to a case of compaction-driven dolomitization: a Jurassic palaeohigh in the Po Plain, Italy

Dolomitization of a carbonate platform can occur at different times and in different diagenetic environments, from synsedimentary to deep burial settings. Numerical simulations are valuable tools to test and select the model that, among different hypotheses compatible with field and geochemical data, best honour mass balance, kinetic and thermodynamic constraints. Moreover, the simulation can predict the distribution of the dolomitized bodies in the subsurface and evaluate porosity changes; valuable information for the oil industry. This study is the first attempt to reproduce and investigate the compaction dolomitization model. The diagenetic study of the Jurassic carbonate basin and palaeohigh system of the Po Plain indicates that the carbonates of the palaeohighs were dolomitized by basin compaction fluids. The main goal of the simulations is to evaluate the origin and evolution of the dolomitizing fluids and to provide insights regarding the distribution of the potential reservoir‐dolomitized bodies in the Po Plain. The modelling process is subdivided into two steps: basin modelling and reactive transport modelling. The SEBE3 basin simulator (Eni proprietary) was used to create a three‐dimensional model of the compacting system. The results include compaction fluid flow rate from the basin to the palaeohigh, compaction duration and a determination of the total amount of fluid introduced into the palaeohigh. These data are then used to perform reactive transport modelling with the TOUGHREACT code. Sensitivities on dolomite kinetic parameters suggest that dolomitization was an efficient process even at low temperatures, with differences mainly related to the dynamics of the process. Fluid composition is one of the main constraints, the sea water derived compaction fluid is proven to be efficient for dolomitization due to its relatively high Mg content. Simulations also confirmed that permeability is the most important factor influencing fluid flow and, consequently, the dolomite distribution in the formation. Permeable fractured zones have a strong influence, diverting the dolomitizing fluids from their normal path towards overlying or lateral zones. Moreover, the simulations showed that, after dolomite replacement is complete, the dolomitizing fluids can precipitate dolomite cement, causing over‐dolomitization, with related localized plugging effects in the zone of influx. Mass balance calculations indicate that in the dolomitization compaction model, the amount of compaction water fluxed from the basin to the carbonate is the main constraint on dolomitization efficiency. This observation implies that the ratio between the volume of the basin undergoing compaction and the volume of the palaeohigh is a limiting factor on the final size of the dolomitized bodies. An isolated palaeohigh could be an ideal site for pervasive replacement dolomitization due to the large volume of compaction fluids available compared with the carbonate rock volume. In the case of large platforms, the more permeable margin lithofacies are the most likely sites for compaction model dolomitization. The combined use of a basin simulator and reactive transport modelling has proved to be a successful method to verify model reliability and it provides insights into the volumetric distribution of diagenetic products.     

重庆金佛山地区土壤酸度分布特点及影响因素研究

通过15个剖面样品分析,对金佛山北坡土壤酸度分布特点及影响因素进行了研究。结果表明,金佛山地区土壤酸度分布呈现p H平均值偏低、变异较大的特点: 山腰志留系砂页岩区土壤酸度大于灰岩区的土壤酸度;在石灰岩区,山顶的土壤酸度则比坡腰和山脚的大,缓坡地带的土壤酸度比陡坡地带的大。山腰和坡脚p H值较高,体现了植被状况和人类干扰的共同影响,而页岩区土壤酸度较灰岩的大,则反映了成壤母质的影响作用。      

岩土工程勘察相关问题浅析

把作者工作经验同国家现行规范及行业标准结合起来,分析了岩土工程勘察中存在的一些问题,从现场勘探资料收集(勘探点布设、野外地层的划分、原位测试、地下水位的观测)、土工试验(粉土的划分、剪切方法的选择、固结试验)及岩土工程分析评价(地基均匀性、粉土及粉砂地基承载力特征值的修正、地基承载力的确定、地震效应、基础方案选择、建筑工程分级)三个方面进行了剖析,提出了一些解决问题的个人的看法,以便与同行交流学习。     

海洋沉积物动力学的示踪物方法

本文的论题是示踪物方法在海洋物源追踪和沉积物输运率计算中的应用 ,以及示踪物方法的普适性理论框架。定量的物源追踪需要适当的示踪标记和物质混合模型 ,有必要根据沉积动力过程的研究来确定示踪标记的变换函数 ,从而将改进的示踪标记用于混合模型分析。人工示踪物实验的现有方法以空间积分法最为常用 ,其关键是示踪物质心运动和沉积物活动层的界定。天然示踪物的质心位置是无法定义的 ,因此不能借用传统人工示踪物方法来估算物质输运率 ;在某些特殊情形下 ,可以利用天然示踪物的质量守衡原理来获得物质输运信息。今后 ,以示踪物质的连续方程为基础 ,有可能建立一种同时适用于人工和天然示踪物的普适理论框架。其中需解决的问题包括示踪物与现场物质的差异、沉积速率和活动层厚度的时间尺度、沉积物扩散过程等。     

锚喷材料经时蠕变损伤本构方程

从以应力，湿度，温度和损伤诸函数的时间积分表示和自由能涵函出发，根据非平衡热力学定律，同时考虑了喷射混凝土老化效应及骨料因素，给出了锚喷材料损伤蠕变本构方程和损伤演化方程，养护时间及蠕变有效作用应力的定义，并用实验结果验证了该理论。     

Environmental risk evaluation of the use of mine spoils and treated sewage sludge in the ecological restoration of limestone quarries

The ecologic restoration criteria in areas degraded from extraction activities require making use of their mine spoils. These materials do not meet fertility conditions to guarantee restoration success and therefore, need the incorporation of organic amendments to obtain efficient substratum. Reducing the deficiencies in the organic material and restoration material nutrients with the contribution of treated sewage sludge is proposed in this work. This experiment was based on a controlled study using columns. The work was conducted with two mine spoils, both very rich in calcium carbonate. The first mineral, of poor quality, came from the formation of aggregates of crushed limestone (Z). The other residual material examined originated in limestone extraction, formed by the levels of interspersed non-limestone materials and the remains of stripped soils (D). Two treatments were undertaken (30,000 and 90,000 kg/ha of sewage sludge), in addition to a control treatment. The water contribution was carried out with a device that simulated either short-duration rain or a flooding irrigation system in order to cover the surface and then percolate through the soil. The collection of leached water took place 24 h after the applications. Different parameters of the leached water were determined, including pH, electrical conductivity, nitrate anions, ammonium, phosphates, sulphates and chlorides. The values obtained for each irrigation application are discussed, and the nitrate values obtained were very elevated.     

一种新型自动开槽机及其控制

针对棒、管料开槽的问题，提出了一种新型全自动开槽机。介绍了该开槽机的结构和工作原理，建立全自动开槽机相适应的液压系统，搭建了开槽机继电器——控制器控制电路，实现了该设备的全自动过程控制。