基于PGNAA技术在线分析系统的应用

近年来,随着核探测与分析技术的日趋成熟,使复杂γ谱的获取、解析达到了在线测量的要求,从而使在线PGNAA(中子活化瞬发γ射线分析)技术获得了飞速的发展。它可对一些工业生产过程中的全物料进行在线测量,其分析精度、可靠性等皆能满足在线元素含量分析的需要,因而显示出巨大的发展潜力和广阔的市场前景。这里介绍了基于PGNAA技术的在线分析系统的基本原理、组成和发展,并概述了它在水泥、煤炭等行业的应用情况。     

激光剥蚀等离子体质谱分析中激光剥蚀参数对信号响应的影响

探讨了激光剥蚀等离子体质谱固体微区分析中激光剥蚀参数对元素分析信号灵敏度及稳定性的影响。这些参数包括激光功率、脉冲频率、剥蚀孔经、散焦距离、剥蚀方式等。讨论了优化的激光剥蚀等离子体质谱信号采集及数据处理方式。在全质量范围内选用具有代表性的元素作为研究对象,建立了激光剥蚀的一般性特征规律和266nm紫外激光系统的最佳操作条件。在选定的激光剥蚀参数下,大多数被测元素的检出限为22.8~457ng/g,能够满足固体微区分析的要求。     

Outlier detection algorithms and their performance in GOCE gravity field processing

The satellite missions CHAMP, GRACE, and GOCE mark the beginning of a new era in gravity field determination and modeling. They provide unique models of the global stationary gravity field and its variation in time. Due to inevitable measurement errors, sophisticated pre-processing steps have to be applied before further use of the satellite measurements. In the framework of the GOCE mission, this includes outlier detection, absolute calibration and validation of the SGG (satellite gravity gradiometry) measurements, and removal of temporal effects. In general, outliers are defined as observations that appear to be inconsistent with the remainder of the data set. One goal is to evaluate the effect of additive, innovative and bulk outliers on the estimates of the spherical harmonic coefficients. It can be shown that even a small number of undetected outliers (<0.2 of all data points) can have an adverse effect on the coefficient estimates. Consequently, concepts for the identification and removal of outliers have to be developed. Novel outlier detection algorithms are derived and statistical methods are presented that may be used for this purpose. The methods aim at high outlier identification rates as well as small failure rates. A combined algorithm, based on wavelets and a statistical method, shows best performance with an identification rate of about 99%. To further reduce the influence of undetected outliers, an outlier detection algorithm is implemented inside the gravity field solver (the Quick-Look Gravity Field Analysis tool was used). This results in spherical harmonic coefficient estimates that are of similar quality to those obtained without outliers in the input data.     

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.     

Low-temperature thermodynamic properties of disordered zeolites of the natrolite group

 The heat capacity of paranatrolite and tetranatrolite with a disordered distribution of Al and Si atoms has been measured in the temperature range of 6–309 K using the adiabatic calorimetry technique. The composition of the samples is represented with the formula (Na_1.90K_0.22Ca_0.06)[Al_2.24Si_2.76O₁₀]·nH₂O, where n=3.10 for paranatrolite and n=2.31 for tetranatrolite. For both zeolites, thermodynamic functions (vibrational entropy, enthalpy, and free energy function) have been calculated. At T=298.15 K, the values of the heat capacity and entropy are 425.1 ± 0.8 and 419.1 ±0.8 J K⁻¹ mol⁻¹ for paranatrolite and 381.0 ± 0.7 and 383.2 ± 0.7 J K⁻¹ mol⁻¹ for tetranatrolite. Thermodynamic functions for tetranatrolite and paranatrolite with compositions corrected for the amount of extraframework cations and water molecules have also been calculated. The calculation for tetranatrolite with two water molecules and two extraframework cations per formula yields: C _p (298.15)=359.1 J K⁻¹ mol⁻¹, S(298.15) −S(0)=362.8 J K⁻¹ mol⁻¹. Comparing these values with the literature data for the (Al,Si)-ordered natrolite, we can conclude that the order in tetrahedral atoms does not affect the heat capacity. The analysis of derivatives dC/dT for natrolite, paranatrolite, and tetranatrolite has indicated that the water- cations subsystem within the highly hydrated zeolite may become unstable at temperatures above 200 K. Received: 30 July 2001 / Accepted: 15 November 2001     

Sulfur Content and Isotopic Ratio of Cambro-Ordovician Carbonate Rocks from South Korea: A Possible Source for Mesozoic Magmatic-hydrothermal Ore Sulfur

Abstract: Carbonate rocks of Cambrian (18 samples) and lower-middle Ordovician (11 samples) ages from South Korea were analyzed for sulfur contents of structurally substituted sulfate (SSS) and sulfides and their δ³⁴S values. The δ³⁴S values of SSS ranging from +25.9 to +45.2 permil, are averaged as +33.6 and +33.5 permil for the Cambrian and Ordovician rocks, respectively, which indicate high δ³⁴S values of the Cambro-Ordovician seawater. The SSS contents in the carbonate rocks are low being 2.9 to 17.3 ppm S (averaged as 7.0 ppm S). Sulfide sulfur, on the contrary, is much abundant containing 3 to 1,880 ppm S and the δ³⁴S values range widely between –17.6 and +31.1 permil. Sulfide sulfur of the studied rocks excluding impure carbonates has an average content of 187 ppm S and δ³⁴S value of +12.8 permil (n=24). The estimated δ³⁴S (sulfate–sulfide) values, which range from 13.8 to 25.4 permil in general with a few exceptions from 36.5 up to 52.3 permil for some impure carbonates, may provide evidence for the persistent oceanic anoxia with its temporary recovery during the Cambro-Ordovician time.
The SSS and sulfide sulfurs have often higher δ³⁴S values than the Mesozoic-Cenozoic ore sulfur (Ishihara et al., 2000). Since carbonate rocks are very reactive with circulating hydrothermal ore solution, high δ³⁴S values of the Korean ore deposits might be caused to some extent by ³⁴S enrichment from the host carbonates, resulting in the low SSS contents observed.     

中原地区M≥6级地震后的减(增)震效应

通过对中原地区1500年－2000年所有19次M≥6级地震后空间图像的分析，初步认为M≥6级地震发生后平均63年内，在距原震中平均176km内无M≥5级地震发生，全部19次震例均呈现出内部减震效应，而在其外围出现地震增强的活动图像特征，增震效应对应率为72％。这种强震后的减（增）震效应，不仅对地震危险性分析，而且对1年尺度以上的地震趋势预测均有一定的意义。     

ARTIFICIAL NEURAL NETWORK CORRECTION OF ROUGH ERRORS OF OBSERVATIONS*

In the context of tower measured radiation datasets.following the correction principle meeting a diagnostic equation in data quality control and in terms of a technique for model construction on data and ANN (artificial neural network) retrieval for BP correction of radiation measurements with rough errors available,a BP model is presented.Evidence suggests that the developed model works well and is superior to a convenient multivariate linear regression model,indicating its wide applications.     

战略环境评价若干问题研究

分析了传统环境影响评价制度的不足，回顾了战略环境评价的研究与实践进展，阐述了战略环境评价与环境可持续发展的关系，并对以实现环境可持续发展为目标的战略环境评价体系所存在的问题进行了分析。     

大连市城市内部居住环境评价的空间结构——基于面源模型的分析

以大连市为例 ,首先利用ARC/INFO软件将研究地区划分成 162个元胞作为评价的基本空间单元 ,建立了居住环境评价的面源模型。其次利用MDS方法确定了评价因子、列联表法验证了居民属性与居住环境评价之间的相互独立程度、因子分析方法探讨了居住环境评价结构的平行性。最后应用GIS对居住环境评价空间分异现象进行了分析。