山西应县木塔与历史地震

山西应县木塔与历史地震的关系是制定修缮应县木塔方案中的一个重要的问题。通过对历史资料的详细研究，对应县木塔的建造时间、场地影响烈度、地震对木塔的影响以及历史上2次加固的情况有了更清晰的认识。在此基础上，对未来的地震烈度给出了最保守的估计，并结合木塔的场地条件和木塔的结构，提出了对应县木塔抗震加固的具体建议。     

新疆病险水库加固工程实践综述

新疆现有水库多兴建于20世纪60、70年代，经过了多年长期运行以及建设施工时的资金不足、技术条件差、施工方式落后等问题，部分水库已存在质量和安全隐患，成为病险水库。本文介绍了新疆水库建设的特点，重点分析了病险水库的成因机制，分类统计了垮坝事件的原因。并通过工程实例，针对不同的病因总结了病险水库的整治对策，从而为各种水库的类似病害提供了实践经验和技术方法。     

Stability analysis of lateritic waste deposits

In open-pit mines covered with lateritic soil, the sterile ground is stored in specially prepared sites. The waste area must then be enhanced in order to extend storage capacity.

To better understand the effect of an elevated dump, typical laboratory tests (triaxial and oedometer tests) have been performed on the lateritic material. The waste disposal site has been modeled using both limit equilibrium and finite element methods. Different types of finite element models have been run; they take the variation of Young's modulus with depth into account and simulate the effect of construction over various phases. Modeling results are then compared with in situ measurements.     

Effect of boundary element details on the seismic deformation capacity of structural walls

The objective of this study is to investigate the effect of boundary element details of structural walls on their deformation capacities. Structural walls considered in this study have different sectional shapes and/or transverse reinforcement content at the boundaries of the walls (called boundary element details hereafter). Four full‐scale wall specimens (3000mm (h_w)×1500mm (l_w)×200mm (T)) were fabricated and tested. Three specimens are rectangular in section and the other specimen has a barbell‐shaped cross‐section (a wall with boundary columns). The rectangular wall specimens are reinforced according to the common practice used for reinforced concrete residence buildings in Korea and Chile. In this study, the primary variable for these rectangular specimens is the content of transverse reinforcement to confine the boundary elements of a wall. The barbell‐shaped specimen was designed in compliance with ACI 318‐95. The response of the barbell‐shaped specimen is compared with those of other rectangular specimens. The effective aspect ratio of the specimens is set to two in this study. Based on the experimental results, it is found that the deformation capacities of walls, which are represented by displacement ductility, drift ratio and energy dissipation capacities, are affected by the boundary element details. Copyright © 2002 John Wiley & Sons, Ltd.     

非饱和渗流基质吸力对边坡稳定性的影响

降雨入渗是致使边坡岩土体稳定性下降并最终导致崩滑地质灾害发生最为常见的环境因素。通常对边坡中地下水的影响分析采用的是经典的静水压力假定 ,并考虑适当的折减系数。本文研究了非饱和土强度随基质吸力变化的规律 ,对基质吸力影响边坡稳定性的机制进行探讨 ,并提出了相应的分析方法。运用上述方法分析了某露天矿边坡实例。结果表明 ,该方法十分有效。     

A new approach to soil characterisation for hydrology–stability analysis models

Landslide stability analysis increasingly utilises high-resolution coupled hydrology–slope stability models (CHASM) to improve stability assessments in areas subject to dynamic pore pressure regimes. In such environments, the estimation of soil hydraulic conductivity (K) is a key parameter but one which is not always readily available or determined with the required resolution. By using basic soil particle-size distribution (PSD) data, we evaluate the microscopic composition of the actual soil, and applying the analytical relations obtain by a Self-Consistent Method (SCM) approach, we determine an appropriate value of K. This is of importance in that it allows within-soil type variability to be reflected in terms of K and hence within the model structure. The SCM methodology is briefly reviewed and an illustrative application is undertaken for a slope typical of Hong Kong. The results show model output sensitivity in terms of moisture content and factor of safety (FOS) when comparing K values determined using the SCM approach and the conventional field determination. In attempting to determine slope hydrological processes and attendant stability conditions, we conclude that the application of SCM approach offers a novel methodology for potentially improving the parameterisation of hydrology–slope stability models.     

The shapes of cold, high mountains in sedimentary rocks

Terzaghi (Geotechnique 12 (1962) 251) and Young (Young, A., 1972. Slopes. Oliver and Boyd, Edinburgh, 288 pp.) described the stable forms of slopes in sedimentary rock masses, assuming penetrative discontinuities, which are parallel to bedding and joints which are perpendicular to bedding. The only movements considered were slides along bedding. Experience in the Canadian Rockies indicates that the cohesionless rock masses that exist at or above tree line may also move by toppling, buckling and sliding along joints. These processes also act to limit the inclinations of stable slopes. Rock strength is a factor in the critical height of a slope that buckles. The processes can be represented as fields on a process diagram, a plot of slope inclination against bedding dip, using the basic friction angles of the rocks present.The process diagram also separates five common mountain peak shapes, which form on homoclinal sequences of beds. Castellate and Matterhorn mountains occur in sub-horizontal beds, cuestas develop in gently to moderately dipping beds. Hogbacks formed in moderately to steeply dipping beds have similar slope angles on both cataclinal and anaclinal slopes. Dogtooth mountains occur in steeply dipping sub-vertical beds.     

边坡支护结构荷载取值问题研究

边坡支护结构上的荷载一般采用传统的土(岩)压力理论计算,本文对这种荷载取值方法存在的问题进行了分析,提出了以稳定性为基础确定边坡支挡结构上荷载的方法,该方法能弥补现行荷载取值方法的不足。     

Pullout test model for extensible reinforcement

A formulation for the analysis of pullout test on highly extensible planar reinforcement is presented. The non-linear differential equation for pullout mechanism was expressed in non-dimensional form and solved numerically using the Gauss–Siedel technique. Parametric study was carried out for various ranges of relative stiffnesses, and relative bond resistances. Normalized load–displacement relations and the variations of pullout force and reinforcement displacements along the length of reinforcement are presented graphically. A method for the estimation of the interface interaction parameters from a pre-failure test is also given. The numerical predictions compare well with the available experimental pullout test results for various geotextiles, polymers and nylon geosynthetics. Copyright © 1999 John Wiley & Sons, Ltd.     

Effect of strain-dependent dynamic properties of backfill and foundation soil on the external stability of geosynthetic reinforced waterfront retaining structure subjected to harmonic motion

A simplified method to determine the minimum length of reinforcement required for the external stability of waterfront reinforced soil structures under seismic conditions is presented. In the present analysis, strain-dependent dynamic properties (shear modulus and damping ratio) are used. The results obtained from the present method are well compared with the results of pseudo-static method of analysis. For the set of input parameters, the estimated minimum length of reinforcement required against sliding failure is nearly 27–29% higher for an input normalized frequency of 1.06 and is nearly 22–25% lower for another input normalized frequency of 1.94 when compared with the results of pseudo-static approach. This can be attributed to the mode change behaviour of the waterfront structure. In addition, the effect of foundation type on the external stability of waterfront reinforced soil structures has also been presented and it is found that the foundation type has a significant effect on the same. For the given set of input parameters, the length of minimum reinforcement required for a slope and vertical wall having a flexible foundation are about 26–28% and 32–38% larger than that of a slope and vertical wall with rigid foundation, respectively.