矿山边坡稳定性研究的回顾与展望

本文阐述了露天矿边坡工程的特点, 回顾了露天矿边坡稳定性研究及其取得的理论成果和进展, 指出露天矿边坡稳定性研究的特点, 提出相应的研究技术路线与方法。     

Rock-slides on road cuttings in the Dinaric karst of Croatia: processes and factors

The northern Adriatic coast, which forms part of the Dinaric karst system, is bordered by high mountains. Here, the occurrence of rock-slides and rock-falls in road sections with high cuttings excavated in recent times and more than one century ago has been documented. Some of these old slopes were stable for a long time before rock-slides started to occur. We propose that these mass movements are favoured by karstification processes acting along joints in the exposed rock mass. The stress changes induced by overburden removal (excavation) cause dilation in the mass joint systems reducing the rock mass strength and facilitating the circulation of aggressive water. Changes in water pressure and temperature, wetting and drying cycles, and corrosion processes along discontinuity planes entail a reduction through time of the shear strength of potential failure surfaces.     

新疆及中亚地区斜坡灾害研究现状与展望

新疆和中亚五国山河相连,都是"一带一路"建设的重要支点,但也是滑坡、泥石流等斜坡灾害的高发区,且两地的地质灾害发育有着明显的共性.本文对新疆和中亚地区的斜坡灾害研究现状进行综述,分析了两地斜坡灾害形成机理、发育规律,即中高山地分布集中,受降雨和冰雪融水影响很大,黄土滑坡发育.新疆的斜坡灾害研究多围绕公路、水利等工程设施...     

Influence of tectonic structures on the Hope Slide, British Columbia, Canada

The Hope Slide, which occurred on January 9, 1965, involved an estimated 47-Mm³ of meta-volcanics and intrusive rocks. Previous workers reported the presence of tectonic structures (faults and shear zones) along the failure surface at the Hope Slide. These tectonic features were investigated in detail to assess their effects on rock-mass quality and the related implications for slope stability. This paper integrates basic field and laboratory concepts from structural and engineering geology. Subdividing the failure area into structural domains allowed distinct discontinuity sets to be associated with specific tectonic structures. The Geological Strength Index (GSI) was used to estimate the rock-mass damage related to the tectonic structures. Low GSI values were seen to outline tectonic damage zones. Point-load tests were used to characterise the compressive strength of rocks adjacent to the tectonic structures. Strength anisotropy, tentatively attributed to damage caused by a large shear zone, was observed in greenstone samples. Seepage zones along the failure surface were observed preferentially along shallow discontinuities that dipped downslope and in rock masses of good quality (GSI > 40). An alternative morphology of the slope failure is proposed by distinguishing between the extent of the surficial damage due to the rock-slope failure and the zone of failed material (depletion zone). For the first time, a kinematic mechanism for the Hope Slide is proposed, based on a preliminary 3-dimensional block model. A pre-1965 DEM was produced from estimates of material lost and gained as reported by previous workers. The pre-1965 DEM revealed that the tectonic structures recognised during fieldwork bounded the material that failed in the 1965 event.     

Grand canyon—a quantitative approach to the erosion and weathering of a stratified bedrock

A new method is proposed for solving a differential equation arising from weathering-limited development of a valley. Allowance is made for horizontal stratification and overhang can be allowed to develop. The model is applied to the Grand Canyon and comments are included on its relevance.     

SNS柔性防护网在黄山风景区边坡支护中的应用

黄山风景区钓小旅游公路全长3．9km,其间有五个边坡稳定性较差,故对此进行加固治理。本文浅谈治理工程中的SNS柔性防护网的应用。     

昆明海口头石山尾矿库工程地质问题及处理

头石山尾矿库存在坝址地基土稳定性差和库址渗漏等地质问题,认真研究处理,以确保尾矿库设计合理和坝体安全及投入使用后运行正常。     

Spatial probabilistic modeling of slope failure using an integrated GIS Monte Carlo simulation approach

Spatial probabilistic modeling of slope failure using a combined Geographic Information System (GIS), infinite-slope stability model and Monte Carlo simulation approach is proposed and applied in the landslide-prone area of Sasebo city, southern Japan. A digital elevation model (DEM) for the study area has been created at a scale of 1/2500. Calculated results of slope angle and slope aspect derived from the DEM are discussed. Through the spatial interpolation of the identified stream network, the thickness distribution of the colluvium above Tertiary strata is determined with precision. Finally, by integrating an infinite-slope stability model and Monte Carlo simulation with GIS, and applying spatial processing, a slope failure probability distribution map is obtained for the case of both low and high water levels.     

Dynamic theory of rigid-plasticity

This paper deals with an analysis method for the response and motion of soil-like rigid-plastic bodies under seismic loading conditions. A continuity condition to determine the acceleration distribution within the rigid-plastic body when the failure occurs during seismic motions is proposed. Combining this continuity condition of acceleration and the ‘Generalized Limit Equilibrium Method (GLEM)’, the responses of the earth structure during seismic motions as well as the permanent displacements can be obtained, where GLEM is one of the limit equilibrium methods proposed by the authors for static problems and providing the approximate solution for Kötter's equation. The theoretical formulation of the method, the illustrative examples, and some comparisons between the analytical and experimental results are demonstrated.     

Stress–strain behaviour of a loosely compacted volcanic-derived soil and its significance to rainfall-induced fill slope failures

The stress–strain behaviour of a soil is crucial to the recognition of the mechanism of slope failure. Triaxial tests, composed of isotropically consolidated drained (ICD) and undrained compression (ICU) tests and anisotropically consolidated constant deviatoric stress path (CQD) tests, were carried out with the aim of investigating the stress–strain behaviour of loosely compacted volcanic-derived soils. The fact that the critical states are the same for ICU, ICD and CQD tests may show that the critical state is independent of the above three stress paths. The critical state line, as defined in critical state soil mechanics, is obtained from the e–log p′ and q–p′ plots based on the results of the above tests. The initial state of the consolidated specimens at initiation of failure may be classified as dilative or contractive in the light of the locations of the soil state relative to the critical state line. For contractional soils, the increased pore water pressure generated by rainfall infiltration leads to a contractive failure in a drained manner, giving rise to high excess pore water pressure. The excess pore water pressure caused by contraction cannot be dissipated instantly, resulting in a decrease in the shear resistance of the soil. The failure process is rapid. The failed soil mass is prone to flow after failure under the action of gravity due to its high moisture content and inflow of surface runoff and rainwater. For dilational soils, the increased pore water pressure resulting from infiltration leads to dilation, which reduces pore water pressure and thus increases the shear resistance of the soil. However, continued rainfall infiltration may be able to equilibrate the reduction in pore water pressure caused by dilation and, therefore, the dilation or displacement can continue. In Hong Kong, volcanic-derived soil is characterized by high permeability. Both the high permeability of volcanic-derived soil and a shallow failure surface make it possible for the reduction in pore pressure to equilibrate relatively quickly. Therefore, the failure is also rapid, at least for poorly compacted fill slopes.