Ore-forming Fluid and Mineral Source of the Hongshi Copper Deposit in the Kalatage Area, East Tianshan, Xinjiang, NW China

The Hongshi copper deposit is located in the middle of the Kalatage ore district in the northern segment of the Dananhu-Tousuquan island-arc belt in East Tianshan, Xinjiang, NW China. This study analyses the fluid inclusions and H, O, and S stable isotopic compositions of the deposit. The fluid-inclusion data indicate that aqueous fluid inclusions were trapped in chalcopyrite-bearing quartz veins in the gangue minerals. The homogenization temperatures range from 108°C to 299°C, and the salinities range from 0.5% to 11.8%, indicating medium to low temperatures and salinities. The trapping pressures range from 34.5 MPa to 56.8 MPa. The δ18OH2O values and δD values of the fluid range from ?6.94‰ to ?5.33‰ and from ?95.31‰ to ?48.20‰, respectively. The H and O isotopic data indicate that the ore-forming fluid derived from a mix of magmatic water and meteoric water and that meteoric water played a significant role. The S isotopic composition of pyrite ranges from 1.9‰ to 5.2‰, with an average value of 3.1‰, and the S isotopic composition of chalcopyrite ranges from ?0.9‰ to 4‰, with an average value of 1.36‰, implying that the S in the ore-forming materials was derived from the mantle. The introduction of meteoric water decreased the temperature, volatile content, and pressure, resulting in immiscibility. These factors may have been the major causes of the mineralization of the Hongshi copper deposit. Based on all the geologic and fluid characteristics, we conclude that the Hongshi copper deposit is an epithermal deposit.     

内蒙古新地沟金矿床黄铁矿热电性特征及深部找矿意义

内蒙古新地沟金矿是中型绿岩型金矿床,但已属于严重资源危机的矿山,急待寻找接替资源,因此对新地沟金矿床进行深部远景预测具有十分重要的意义。本文根据找矿矿物学和成因矿物学理论,利用显微镜、电子探针及热电仪系统分析新地沟金矿床不同标高和矿段中黄铁矿的热电型标型特征,研究结果表明:新地沟金矿床中黄铁矿的晶型以立方体、五角十二面体及聚形为主;热电系数变化主要集中在-331.10~340.20μV·°C~(-1)范围内,导电型多以N型为主,约占总含量的80%;成矿温度主要集中于250~340℃,属于中温矿床。黄铁矿热电性参数XNP变化范围较大,估算矿体剥蚀率为67.96%~74.31%。通过对黄铁矿导型的空间分布规律和矿体剥蚀分析表明:油篓沟矿段位于矿体中底部,向深部可能有小规模延伸,小西沟矿段钻孔ZK106在深部有较大规模的延伸,其矿化前景最好;小西沟矿段钻孔ZK102深部矿化前景次之;大汗青矿段钻孔ZK_2802其深部矿化前景较差。综合分析认为,该矿床深部具有较好的找矿潜力。     

陆相红层型铜铅锌矿床与红层盆地热卤水成矿作用

新疆乌恰县乌拉根超大型铅锌矿是中国发现的首个产于陆相红层盆地中的红层型铅锌矿床,对其成矿作用及成因有多种不同认识,但都将其归入现有的一些矿床类型,如喷流沉积型、砂岩型等,却均不能反映其独特的成矿环境与成矿作用。为此,在广泛收集和研究全国陆相红层盆地及其矿产的地质资料基础上,通过区域地质构造背景、含矿建造、矿床特征、控矿因素、成矿物质来源、成矿流体等方面对比分析,认为乌拉根铅锌矿与中国大量产于陆相盆地内红色建造中的红层铜矿,在矿床特征、控矿条件、矿床成因等方面具有高度的一致性,均为陆相红层盆地热卤水作用的结果,是同一类型的矿床。红层型矿床是地洼区的特有矿产,是地球地质演化到地洼阶段才出现的新的矿床类型,陆相红层盆地热卤水作用是一个完全独立的成矿系统,因此将其作为一个单独的矿床类型——红层型矿床是合理的,既具有重要理论意义,也具有重要的实践意义,为铅锌矿找矿开辟了新的方向和领域。     

四川平武银厂金矿勘探复杂地层钻进技术

四川平武银厂金矿区钻探施工中遇到漏失、缩径、岩心破碎、易孔斜和钻孔事故频发等施工难题,施工难度极大。本文结合地层特点,通过采用绳索取心液动锤、高密度低失水泥浆体系、跟管钻进等工艺技术措施,提高了钻进效率和施工质量,大幅度减少了孔内事故的发生,为顺利完成钻孔施工任务奠定了坚实的基础。     

塔里木陆块西北缘萨热克砂岩型铜矿床构造-流体演化对成矿的制约

塔里木陆块西北缘萨热克砂岩型铜矿床构造演化、流体演化与成矿之间具有密切关系,处于一个统一系统中。矿床成岩期方解石中包裹体水的δD值为-65.3‰~-99.2‰,改造成矿期石英包裹体水的δD值为-77.7‰~-96.3‰,成岩成矿期成矿流体δ~(18)OH_2O变化范围为-3.22‰~1.84‰,改造成矿期成矿流体δ~(18)OH_2O变化范围为-4.26‰~5.14‰,指示萨热克铜矿成岩期、改造期成矿流体主要为中生代大气降水及其经水岩作用而成的盆地卤水。矿石中辉铜矿δ~(34)S值为-24.7‰~-15.4‰,指示硫主要源自硫酸盐细菌与有机质还原,部分源于有机硫。构造与成矿流体演化对砂岩铜矿成矿起关键制约作用。盆地发展早期强烈的抬升运动使盆地周缘基底与古生界剥蚀,为富铜矿源层的形成提供了丰富物源,至晚侏罗世盆地发展晚期,长期演化积聚的巨量含矿流体在库孜贡苏组砾岩胶结物及裂隙中富集,在萨热克巴依盆地内形成具有经济意义的砂岩型铜矿床。     

Genesis and Metallogenic Process of the Lujing Uranium Deposit,Southwest Jiangxi Province,China: Constraints of Micropetrography and S–C–O Isotopes

The Lujing uranium deposit, located in the southeastern part of the Nanling metallogenic province, is one of the representative granite‐related hydrothermal uranium deposits in South China. Basic geology, geochemistry, and geochronology of the deposit have been extensively studied. However, there is still a chronic lack of systematic research on the genesis and metallogenic process of the deposit. Thus, we recently carried out an electron microprobe and stable isotopic analysis. The main research results and progresses are as follows: Uranium minerals in this deposit include coffinite, pitchblende, and uranothorite, and small amounts of uranium exist in accessory minerals in the form of isomorphism. Coffinite, which occurs predominantly as the pseudomorphs after pitchblende, also occurs as a primary mineral and is locally formed from the remobilization of uranium from adjacent uranium‐bearing minerals. The mineralizing fluid was originally composed of a magmatic fluid generated by late Yanshanian magmatism. The high As content of pyrite in ores may reflect the addition of meteoric water, or the formation water (or both), to the magmatic hydrothermal system. The δ³⁴S values vary from −14.4‰ to 13.9‰ (mean δ³⁴S = −3.9‰), showing a range that is similar to nearby Cambrian metamorphic strata and Indosinian granites, indicating that these host rocks represent the source of sulfur; however, the possibility of a mantle source cannot be completely ruled out. According to our new isotopic data and recent Pb isotopic data, we conclude that the uranium in ores was derived by leaching dominantly from the uranium‐rich host rocks, especially the Cambrian metamorphic strata. The δ¹³C_PDB values (−8.75‰ to 1.40‰; mean δ¹³C_PDB = −5.41‰) and δ¹⁸O_SMOW values (5.45–18.62‰; mean δ¹⁸O = 13.02‰) of reddish calcite from the ore‐forming stage suggest that the CO₂ in the mineralizing fluids was derived predominantly from the mantle, with a small component contributed by marine carbonates. Based on these new data and previous research results, this paper proposes that uranium metallogenesis in the Lujing deposit is closely associated with mafic magmatism resulting from crustal extension during the Cretaceous to Paleogene in South China.     

Zircon U–Pb and Wolframite Sm–Nd Dating of the Bayinsukhtu Tungsten Deposit in Southern Mongolia and its Geological Significance

The Bayinsukhtu tungsten deposit is a newly discovered quartz‐vein tungsten deposit in the Xing'an–Mongolia Orogenic Belt (XMOB) in southern Mongolia, hosted by the Bayinsukhtu granite porphyry. The granite porphyry is located mainly south of the study area, over 3 km². The rock consists of quartz and feldspar phenocrysts in a fine‐grained matrix, also mainly composed of feldspar and quartz. The granite porphyry samples demonstrate high SiO₂ and high alkalinity. All samples also straddle the high‐potassium calc‐alkaline series. In a plot of the molar ratios of A/NK versus A/CNK, the granites are metaluminous. The chondrite‐normalized REE patterns are characterized by large negative Eu anomalies and fractionated LREEs. The U–Pb age of zircons from the granite porphyry is 298.8 ± 1.8 Ma, and the Sm–Nd age of the five wolframite samples from the tungsten deposit is 303 ± 19 Ma. The cooling age of the granite porphyry and tungsten mineralization is within the error of measurement and is of the Late Carboniferous age. Geological and geochronological evidence shows that the tungsten mineralization and the granite porphyry at Bayinsukhtu are genetically closely related and that they are results of Carboniferous magmatism. Their tectonic setting is related to the accretion of the Central Asian Orogenic Belt during the late Paleozoic era.     

Rb–Sr Dating of Gold‐Bearing Pyrite in the Jinchang Porphyry Cu–Au Deposit,Heilongjiang Province,NE China

The Jinchang Cu–Au deposit in Heilongjiang Province, NE China, is located in the easternmost part of the Central Asian Orogenic Belt. Rb–Sr analyses of auriferous pyrite from the deposit yielded an isochron age of 113.7 ±2.5 Ma, consistent with previously reported Re–Os ages. Both sets of ages represent the timing of Cu–Au mineralization because (i) the pyrite was separated from quartz–sulfide veins of the mineralization stage in granite porphyry; (ii) fluid inclusions have relatively high Rb, Sr, and Os content, allowing precise measurement; (iii) there are no other mineral inclusions or secondary fluids in pyrite to disturb the Rb–Sr or Re–Os decay systems; and (iv) the closure temperatures of the two decay systems are ≥500°C (compared with the homogenization temperatures of fluid inclusions of 230–510°C). It is proposed that ore‐forming components were derived from mantle–crust mixing, with ore‐forming fluids being mainly exsolved from magmas with minor amounts of meteoric water. The age of mineralization at Jinchang and in the adjacent regions, combined with the tectonic evolution of the northeast China epicontinental region, indicates that the formation of the Jinchang porphyry Cu–Au deposit was associated with Early Cretaceous subduction of the paleo‐Pacific Plate.     

Occurrence and Chemical Compositions of Amphiboles in Altered Dioritic Rocks of Laiwu Skarn‐Type Iron Deposit in West Shandong Area,China

The Laiwu Fe deposit is the largest skarn‐type deposit in West Shandong in China, with an estimated reserve of 290 Mt of iron ore. Here, we investigate the occurrence and chemical composition of amphiboles in altered dioritic rocks of this deposit. Three generations of amphibole group minerals were identified in these rocks. The first type (Type 1) is a hornblende with a generally euhedral crystal shape, 150–500 μm in size, and dominantly occurs in the host monzonite. The second type (Type 2) of hornblende occurs as fine grains (<100 μm) or concentric rims, less than 50 μm in thickness, around the Type 1 hornblende. The third type (Type 3) of amphibole is anhedral actinolite occurring along the boundary or the cracks of the Type 1 or 2 hornblende grains. The Type 1 hornblende has higher FeO (12.5–15.6 wt.%) and lower MgO contents (11.2–14.6 wt.%) than the Type 2 hornblende, which has an FeO content ranging from 8.8 to 10.5 wt.% and MgO content ranging from 14.2 to 17.1 wt.%. The Type 3 actinolite shows the lowest FeO (4.6–6.4 wt.%) and highest MgO (19.8–21.2 wt.%) contents. We infer that the Type 2 hornblende formed from Fe‐rich hydrothermal fluids released during rapid upwelling of the crystallizing magma. The fluids were relatively reduced and enriched in Fe. The Type 3 actinolite formed by coupled dissolution and reprecipitation, and its formation is one of the features denoting Fe‐enrichment events. Our study of these types of amphibole provides insights into the ore formation process.     

Porphyry Copper Deposit Prognosis in the Middle Region of the Bangonghu–Nujiang Metallogenic Belt,Tibet, Using ASTER Remote Sensing Data

The B angonghu–N ujiang metallogenic belt is considered to be T ibet’s third copper belt after the Y ulong and G angdese copper belts. The D uolong gold‐rich porphyry copper deposit, located in the western part of the B angonghu–N ujiang belt was recently recognized as a superlarge prospect. The A dvanced S paceborne T hermal E mission and R eflection R adiometer (ASTER ) was used to characterize the D uolong porphyry deposit alteration area, and three methods, color enhancement, band ratio transformation, and spectral angle mapping, were utilized to extract the phyllic and argillic alteration zones, which are typically considered the most important predictors of porphyry copper. Seven prospecting areas, which match mapped alteration zones, were delineated in the D uolong deposit. In addition, an ASTER image of the eastern region of the B angonghu–N ujiang belt in the X iongmei area was used to extract alteration information, and an area with image characteristics similar to the D uobuza and B olong ore deposits was identified as a prospecting area. Numerous malachite outcrops were identified in the field, and both laboratory analysis and isotopic dating confirmed that the deposit had formed concurrently with the D uobuza deposit (119 M a). Geologic mapping at the 1:5000 scale was conducted in the area, and three types of ore‐bearing rocks were identified, indicating that this area has significant potential to host ore deposits. The discovery of the X iongmei copper mining area is significant for the B angonghu–N ujiang belt.