探测地雷技术研究综述

高敏感度、高可靠度、低花费传感器是全自动或半自动探雷机器人的首要和绝对的选择。当前,有许多技术能够被选来综合使用以满足上述的要求。金属探测器是一种传统的、成熟可靠的探测技术。但是,现在多种地雷含有少量的金属或者不包含任何金属,造成了用金属探测器探雷的困难。目前迫切需要研究发展新颖的探测技术以消除100万颗地雷对许多国家的影响。     

从电法勘探资料分析宋楼煤矿主斜井突水因素

根据宋楼煤矿主斜井直流电法勘探资料及矿井地质及水文地质条件的分析,煤矿主斜井突水原因应该是来自第四系砂砾石含水层及深层地下岩溶水。通过电法勘探确定裂隙发育带、富水区域、涌水部位,对此处实施钻孔注浆堵水后,恢复生产。     

煤矿水害多源信息预测方法研究

基于MAPGIS平台,用Visual C＋＋对其进行二次开发,研制了煤矿水害多源信息预测系统.通过对地震、电法、水文地质等多源数据进行处理后,在MAPGIS系统下进行成图、配准和空间定量分析,建立了预测模型.用该系统对煤矿实际资料进行了处理,结果表明其预测结果较传统方法更为准确.     

矿业开发与环境保护关系综述

笔者介绍了我国矿业发展经历的3个阶段，归纳出我国矿业开发带来的矿山环境问题主要有：地面塌陷、占压破坏土地、改变地质构造、破坏水资源、污染水、污染土壤、污染大气、瓦斯爆炸及河床抬高等。分析了环境恶化的原因主要与区域地质环境条件、历史、经济技术、矿山企业和地方保护主义等因素有关。最后提出了防治矿山环境恶化的对策，对难以治理的地区以预防、避让为主，历史问题由政府和企业共同解决，落实“谁开发、谁保护；谁受益、谁治理；谁破坏、谁恢复”的生态环境保护新机制，加强监管，加强防治对策研究，走综合勘探、综合评价、综合开发、综合利用的发展道路。     

青藏高原中部的东西向扩张构造运动

系统分析了1933~2003年间青藏高原及其周缘发生的745个中、强地震的震源机制解,研究了高原地壳构造运动及其动力学特征。结果表明,大量正断层型地震集中发生在青藏高原中部海拔4000m以上的地区,其中许多地震是纯正断层型地震。震源机制结果显示,该区正断层型地震的断层走向多为南北方向,断层位错矢量的水平分量均位于近东西方向,这表明青藏高原高海拔地区存在着近东西方向的扩张构造运动。地震震源应力场的研究结果表明,在高原中部高海拔地区,E-W向或WNW-ESE向的水平扩张作用控制着该区的地壳应力场。青藏高原高海拔地区近东西方向的扩张构造运动是该区引张应力场的作用结果,其动力学原因可能与持续隆升的高原自重增大引起的重力崩塌及其周边区域构造应力状况有关。而青藏高原周缘地区,除了东部边缘外,南部的喜马拉雅山前沿以及青藏高原的北部、西部边缘所发生的绝大部分地震都是逆断层型或走滑逆断层型地震。在青藏高原周缘地区,北东或者北北东方向水平挤压的构造应力场为优势应力场。在中国西部的大范围内,主压应力P轴水平分量位于NE-SW方向,形成了一个广域的NE-SW方向的挤压应力场。青藏高原及其周缘应力场特征表明,印度板块的北上运动以及它与欧亚板块之间的碰撞所形成的挤压应力场是高原强烈隆起的直接原因。在青藏高原中南部形成了近东西向引张应力场为主的区域,并以东西向扩张构造运动部分释放其应力积累。研究高原高海拔地区的引张应力场和近东西向扩张构造运动的特征,对于认识青藏高原强烈隆起的地球动力学过程与机制,有着重要的理论意义。     

淄博市洪山、寨里煤矿地下水串层污染形成原因及防治

淄博市洪山、寨里煤矿区隐伏的奥陶系灰岩裂隙岩溶水污染严重。水质污染突发于矿坑全面闭坑以后，污染范围与矿坑水区一致，地下水污染组份与矿坑水的高含量组份相同。水质恶化主要由矿坑水串层污染所致。在此针对串层污染形成原因及影响因素，提出了防治对策。     

邯峰矿区古构造应力场与构造演化

采用共轭剪节理应力反演方法,恢复了邯郸-峰峰矿区晚古生代以来的3期古构造应力场,进而探讨了煤田构造的演化历史,将其分为4大阶段：①中生代早期近NS向挤压,煤系后期改造初动期;②中生代晚期SE-NW向挤压,奠定煤田构造格架的基础;③中生代末至古近纪NW-SE向拉张,煤田构造格架定型;④新近纪以来近东西向拉张,煤田构造的现代活动.     

三峡深水高土石围堰工程的渗流研究

为了对三峡工程二期高土石围堰防渗设施的布置方案及其阻渗效果进行比较,采用有限元法对二期高土石围堰在不利的运行工况下的渗流场进行数值分析.比较了双排混凝土防渗墙方案、单排塑性混凝土低防渗墙加土工膜斜墙和单排厚塑性混凝土防渗墙等3种方案,分别采用恒定与非恒定模型计算,对立面二维和三维绕渗及防渗墙局部开裂等不利工况分别进行了数值模拟.结果表明:三方案均可有效抑制渗流场,双排混凝土防渗墙的防渗效果最好;墙体的局部开裂仅对局部区域的流场有影响.非恒定数值分析表明,堰体、基础不均匀沙石料及基坑抽水速度对渗流场影响极大,为保证堰体稳定,应限制基坑水位降落速度小于2 m/d.     

Outlier detection algorithms and their performance in GOCE gravity field processing

The satellite missions CHAMP, GRACE, and GOCE mark the beginning of a new era in gravity field determination and modeling. They provide unique models of the global stationary gravity field and its variation in time. Due to inevitable measurement errors, sophisticated pre-processing steps have to be applied before further use of the satellite measurements. In the framework of the GOCE mission, this includes outlier detection, absolute calibration and validation of the SGG (satellite gravity gradiometry) measurements, and removal of temporal effects. In general, outliers are defined as observations that appear to be inconsistent with the remainder of the data set. One goal is to evaluate the effect of additive, innovative and bulk outliers on the estimates of the spherical harmonic coefficients. It can be shown that even a small number of undetected outliers (<0.2 of all data points) can have an adverse effect on the coefficient estimates. Consequently, concepts for the identification and removal of outliers have to be developed. Novel outlier detection algorithms are derived and statistical methods are presented that may be used for this purpose. The methods aim at high outlier identification rates as well as small failure rates. A combined algorithm, based on wavelets and a statistical method, shows best performance with an identification rate of about 99%. To further reduce the influence of undetected outliers, an outlier detection algorithm is implemented inside the gravity field solver (the Quick-Look Gravity Field Analysis tool was used). This results in spherical harmonic coefficient estimates that are of similar quality to those obtained without outliers in the input data.     

A parametric study on the impact of satellite attitude errors on GOCE gravity field recovery

In the recent design of the Gravity field and steady-state Ocean Circulation Explorer (GOCE) satellite mission, the gravity gradients are defined in the gradiometer reference frame (GRF), which deviates from the actual flight direction (local orbit reference frame, LORF) by up to 3–4°. The main objective of this paper is to investigate the effect of uncertainties in the knowledge of the gradiometer orientation due to attitude reconstitution errors on the gravity field solution. In the framework of several numerical simulations, which are based on a realistic mission configuration, different scenarios are investigated, to provide the accuracy requirements of the orientation information. It turns out that orientation errors have to be seriously considered, because they may represent a significant error component of the gravity field solution. While in a realistic mission scenario (colored gradiometer noise) the gravity field solutions are quite insensitive to small orientation biases, random noise applied to the attitude information can have a considerable impact on the accuracy of the resolved gravity field models.