The inversion of anelastic coefficient,source parameters and site respond using genetic algorithm

It gradually becomes a common work using large seismic wave data to obtain source parameters, such as seismic moment, break radius, stress drop, with completingof digital seismic network in China (Hough, et al, 1999; Bindi, et al, 2001). These parameters are useful on earthquake prediction and seismic hazard analysis.Although the computation methods of source parameters are simple in principle and the many research works have been done, it is not easy to obtain the parameters accurately. There are two factors affecting the stability of computation results. The first one is the effect of spread path and site respond on signal. According to the research results, there are different geometrical spreading coefficients on different epicenter distance. The better method is to introduce trilinear geometrical spreading model (Atkinson, Mereu, 1992; Atkinson, Boore, 1995; WONG, et al, 2002). In addition, traditional site respond is estimated by comparing with rock station, such as linear inversion method (Andrews, 1982), but the comparative estimation will introduce some errors when selecting different stations. Some recent research results show that site respond is not flat for rock station (Moya, et al, 2000; ZHANG,. et al, 2001; JIN, et al, 2000; Dutta, et al, 2001). The second factor is to obtain low-frequency level and corner frequency fromdisplacement spectrum. Because the source spectrum model is nonlinear function,these values are obtained by eye. The subjectivity is strong. The small change of corner frequency will affect significantly the result of stress drop.     

DLT程序设计与应用

在近景摄影测量直接线性变换原理的基础上，加入附加条件建立附加有平行条件的直接线性变换函数模型，探讨了在解算过程中用数据探测法剔除粗差，用验后补偿的方法补偿系统误差的实现。鉴于非量测像机在近景摄影洲量中应用导致直接线性变换解法的重要性和实用性及数据量大、解算过程过于复杂的情况。用VC 编制了直接线性变换的解算程序，对其关键的方法和用法进行了说明。     

Determination of silica sand stiffness

Site investigation and evaluation of properties of soil or rock are important aspects of geotechnical design. Determination of the ground stiffness is one of the important parameters in geotechnical engineering. Since the measurement of shear modulus is very sensitive to soil disturbance, especially for sand, determination of the stiffness of soil in the field is more reliable than in laboratory tests on sampled specimens. Measurement of shear modulus is one of the most common applications of self-boring pressuremeter testing. As an in situ device, the pressuremeter provides a unique method for assessing directly the in situ shear modulus of a soil. This paper describes a laboratory study of silica sand stiffness, which varies with stress level and strain amplitude. The results show that the elastic shear modulus value is mainly dependent on the value of the mean effective stress and relative density.     

Geomechanical Properties of Shear Zones in the Eastern Aar Massif,Switzerland and their Implication on Tunnelling

Summary ¶Rock zones containing a high fracture density and/or soft, low cohesion materials can be highly problematic when encountered during tunnel excavation. For example in the eastern Aar massif of central Switzerland, experiences during the construction of the Gotthard highway tunnel showed that heavily fractured areas within shear zones were responsible for overbreaks in the form of chimneys several metres in height. To understand and estimate the impact of the shear zones on rock mass behaviour, knowledge concerning the rock mass strength and deformation characteristics is fundamental. A series of laboratory triaxial tests, performed on samples from granite- and gneiss-hosted shear zones revealed that with increasing degree of tectonic overprint, sample strength decreases and rock behaviour shows a transition from brittle to ductile deformation. These trends may be explained by increasing fracture densities, increasing foliation intensity, increasing thickness of fine-grained, low cohesion fracture infill, and increasing mica content associated with the increasing degree of tectonic overprint. As fracture density increases and the influence of discrete, persistent discontinuities on rock mass strength decreases, behaviour of the test samples becomes more and more representative of rock mass behaviour, i.e. that of a densely fractured continuum. For the purpose of numerical modeling calculations, the shear zones may be subdivided with respect to an increasing fracture density, foliation intensity and mica content into a strongly foliated zone, a fractured zone and a cohesionless zone, which in turn exhibit brittle, brittle-ductile and ductile rock mass constitutive behaviour, respectively.Received December 17, 2001; accepted January 9, 2003 Published online April 29, 2003     

闪长岩强风化带做高层建筑天然地基的可行性研究

借助于中国工商银行山东省分行营业办公楼的工程实践,将常规勘察与原位测试相结合,运用野外钻探、室内试验、原位测试多种手段,对闪长岩强风化带的物理力学性质进行了测试分析和深入地研究,并通过对承载力、沉降变形的验算,得出其作为高层建筑的天然地基是可行的。实践证明,与桩基础处理方案相比,节省资金近200万元,大大加快了施工进度,减少了基础施工难度,取得了巨大的经济效益与社会效益;同时,也提出了研究岩石风化带所遇到的问题:由于采取原状试样及制样难,导致对其物理力学性质了解不够。     

新疆某水利枢纽工程软弱结构面抗剪强度参数的试验研究

某水利枢纽工程位于伊犁地区,影响工程的主要问题为坝基岩体软弱结构面和断层的抗滑稳定问题。根据工程实际条件和软弱夹层特性,采取现场断层软弱结构面试验和室内模拟试验相结合,获得软弱夹层的抗剪参数。实践证明,把两种方法结合起来的试验成果可靠,尤其对一些不具备进行现场大型岩体软弱夹层抗剪试验的工程,采用室内中型直剪仪进 行剪切试验具有实用意义。     

重塑非饱和粘土抗剪强度参数与饱和度的关系研究

土的饱和度是基于水分状态和密度状态的一个衍生变量。存在因应水分状态变化和因应密度状态变化的两类饱和度变化过程。根据23组不同水分状态和密度状态的UU三轴压缩试验结果,讨论了重塑非饱和粘性土抗剪强度参数与饱和度的关系。数据分析表明:粘聚力与水分状态相关的饱和度的关系是强非线性的,与密度状态相关的饱和度的关系是准线性的。内摩擦角与水分状态相关的饱和度的关系是强非线性的,与密度状态相关的饱和度的关系是弱非线性的。     

岩质边坡稳定性分析的探讨

通过最大剪应力等值线来确定边坡的滑动面,并与其结构面抗剪强度相比较,给出了确定边坡的稳定系数的方法。     

比值参数在高密度电法中的应用

探讨了比值参数在高密度电阻率法中的应用；根据工程实例说明比值参数在压制局部干扰和邻近异常分离中有良好效果；将比值参数断面与电阻率反演断面比较研究，能取得较好的异常解释效果。     

人工神经网络模型反演植被生物量参数

该文利用 1988年小麦生长期中生物量参数和微波 (10 2GHz)主被动遥感实测数据 ,作为输入输出I/O矢量对 ,训练人工神经网络为参数反演模型。然后用 1989年小麦生长期中微波主被动遥感实测数据和该神经网络模型 ,来反演其生物量参数在整个 1989年生长期中的变化。反演结果与遥感实测结果作了很好的比较