煤渣改良土的抗冻能力及损伤特性研究

为研究煤渣改良土作为季节冻土区路基填料的抗冻能力,以不同煤渣掺量及不同养护龄期下的煤渣改良土为研究对象,利用GDS三轴试验系统开展了不同冻融次数下改良土的三轴压缩试验,获得了最佳的煤渣掺量及养护时间数据,提出冻融及加载综合影响下改良土的总损伤变量,并据此建立了损伤本构关系。结果表明：改良土的抗冻能力随着煤渣掺入量的增大出现先增强后减弱的变化趋势,随龄期的增长而逐渐增强。冻融循环对改良土物理力学性质的影响主要集中在前5次循环过程,超过5次后影响逐渐减弱。冻融加载总损伤变量能够较好地反映冻融及加载过程中改良土性质的劣化,据此建立的损伤本构关系具有一定的精度,可以为季节冻土区煤渣改良土路基工程提供参考。     

胶东地区控矿剪切带脆性变形时代的Ar-Ar年代学及其对成矿的制约

胶东地区是典型的剪切带型金矿集中区,精确厘定该地区控矿剪切带的活动时代,可为探讨剪切带与金矿成因关系提供关键的时限约束,并且对矿床成矿模式的建立具有至关重要的意义。大量矿床地质证据显示胶东地区控矿剪切带中脆性变形活动对金矿体的形成具有直接影响,但其脆性变形时代尚不十分清楚。据此,本文在详细研究金矿体赋存特征的基础上,系统选取胶东焦家、玲珑、邓格庄、乳山这四个金矿区控矿剪切带断层泥中白云母进行⁴⁰Ar-³⁹Ar年代学研究。定年结果显示,胶东地区焦家剪切带、招平剪切带以及牟乳剪切带的脆性变形时代分别为110.3±1.5Ma、122.8±1.7Ma、119.6±1.2Ma~115.8±1.4Ma。其中焦家剪切带的脆性变形时代明显晚于招平和牟乳剪切带,可能代表了焦家蚀变岩型矿化形成后易遭受后期的构造叠加。综合胶东各金矿区控矿剪切带变形时代、岩体侵位时代、成矿时代及剪切带活动特征和矿体产出特征,本文认为在多期岩体侵位以及控矿剪切带递进变形过程中,剪切带韧性变形区中由高压流体作用产生的同期脆性破裂可形成脉型矿化,如乳山金矿;而在脆-韧性和脆性变形区中发生的大规模脆性变形可导致脉型和蚀变岩型矿化的形成,如玲珑、邓格庄和焦家金矿。但随着剪切带的递进变形和隆升剥蚀,后期多期次的脆性构造变形叠加,可导致多种矿化类型出现在同一构造部位,如焦家金矿中石英脉型和蚀变岩型矿化。     

确定砂土动剪切模量和阻尼比的方法对比

确定土体动剪切模量的常用方法有规范法、Kumar法和自相关函数法,确定相应阻尼比的方法有规范法、Das and Luo法、Kokusho法、Kumar法和互相关函数法,为了分析不同方法所产生差异,实现定量化对比分析,笔者以福建标准砂（粒径为0.5~1.0 mm）为研究对象,采用不排水的应力控制动三轴试验,探讨不同的确定土体动剪切模量和阻尼比方法的差异性,并给出了不同土体条件建议选用的方法。结果表明：1）3种方法确定动剪切模量的结果有一定的差异,随剪应变的增大结果的差异逐渐增大,有效围压对结果的差异性有所影响,当剪应变为4×10^-3,有效围压为100 kPa时,3种方法差异显著,相对误差最大接近20%;2）而5种方法确定阻尼比的结果差异显著,随着剪应变的增大,5种方法确定的阻尼比相对误差大体上均在迅速减小,只有规范法在有效围压为100 kPa时,其相对误差有较小的增大趋势;5种方法中,Kumar法确定的阻尼比最接近平均阻尼比,互相关函数法远高于平均阻尼比,Das and Luo法和Kokusho法确定的阻尼比基本一致但低于平均阻尼比。建议以后的工程应用中,加载方式为应力控制时,可采用自相关函数法确定动剪切模量,采用Kumar法确定阻尼比,二者确定的动剪切模量和阻尼比均最接近平均值。     

真空预压联合碎石桩加固港口吹填堆场地基的试验研究

在港口工程建设中,快速加固超软弱的吹填地基,采用真空预压法是一个经济有效的方法,再联合以碎石桩加固则能进一步提高地基的承载力、减少地基工后沉降.通过真空预压联合碎石桩加固地基的现场试验以及观测资料的分析,得出真空预压联合碎石桩加固后地基的承载力特征值由原天然地基的60 kPa左右提高到220 kPa,计算结果表明打碎石桩后的地基变形模量Esp与真空预压后的Ea相比提高了1倍,联合碎石桩加固后的地基沉降量比仅经过真空预压的地基减少1/3.     

Shear and Richardson number in a mode-water eddy

Measurements of stratification and shear were carried out as part of the EDDIES tracer release experiment in mode-water eddy A4 during the summer of 2005. These measurements were accomplished using both shipboard instrumentation and a drifting mooring. A strong relationship between shear intensity and distance from the center of the eddy A4 was observed with the shipboard ADCP. Diapycnal diffusivity at the SF₆ tracer isopycnal prior to and during the release was estimated from the drifting mooring to be 2.9×10⁻⁶ m² s⁻¹. Diffusivity increased by an order of magnitude to 3.2×10⁻⁵ m² s⁻¹ during the period of the final tracer survey in early September, which was similar to the value estimated from the tracer analysis for the whole experiment (3.5×10⁻⁵ m² s⁻¹, [Ledwell, J.R., McGillicuddy Jr., D.J., Anderson, L.A., 2008. Nutrient flux into an intense deep chlorophyll layer in a mode-water eddy. Deep-Sea Research II, this issue [doi:10.1016/j.dsr2.2008.02.005]].     

A modified numerical calculation method of collapse pressure for thick-walled offshore pipelines

Considering the shear deformation and thickness stretching of large deformation, a modified numerical calculation method based on the thick shell theory is established to determine the collapse pressure of thick-walled pipes. Verification experiments are conducted on ten pipe specimens in hyperbaric chambers. The good agreement between experimental results and numerical predictions shows the validity and reliability of the new numerical calculation method. Combining DNV specification, the characteristic collapse pressure is also calculated for comparison. The difference between experimental results and DNV calculations illustrates the latter one is much conservative in predicting collapse pressure for thick-walled pipes. Sensitivity analysis on manufacturing imperfections and material properties is investigated for pipes with different D/t ratios. Thick-walled pipes are easier to be affected by initial ovality, residual stress and hardening factor. Based on the stress distribution at the moment of collapse, a novel discovery is found that the collapse pressure of thick-walled pipes is dominated by material plastic behavior.     

Nonplanar multi-modal vibrations of fluid-conveying risers under shear cross flows

Risers/pipes conveying fluid are a typical kind of slender structures commonly used in marine engineering. It is of great academic significance and application value for us to evaluate and understand the vibration characteristics and nonlinear responses of these risers under the combined action of internal and external fluid flows. In this paper, the nonplanar vibrations and multi-modal responses of pinned-pinned risers in shear cross flow are numerically studied. With this objective in mind, the van der Pol wake oscillators are used to simulate the dynamical behavior of the vortex shedding in the wake. Two nonlinear equations of motion of the riser are proposed to govern the lateral responses of the riser structure. The nonplanar nonlinear equations for the riser and wake are then discretized by employing Galerkin's method and solved by using a fourth-order Runge–Kutta integration algorithm. Theoretical results show that the coupled frequencies for cross-flow (CF) and in-line (IL) motions and the corresponding coupled damping ratio could be influenced by the external and/or internal fluid velocities. Based on extensive calculations, the dynamical behavior of the riser with various internal and external flow velocities are presented in the form of bifurcation diagrams, time traces, phase portraits, oscillation trajectories and response spectrum curves. It is shown that some interesting dynamical phenomena, such as ‘lock-in’ state, ‘figure-of-eight’ trajectory and quasi-periodic oscillation, could occur in such a fluid-structure interaction system. Our results also demonstrate that the shear parameter can significantly affect the dynamic responses of the riser. When the shear parameter of the cross flow is large, multi-modal quasi-periodic responses of the riser can be excited, showing some new features undetected in the system of fluid-conveying risers in uniform cross flow.     

Genesis of lithium pegmatites from the leinster granite margin,southeast ireland: Geochemical constraints

Extensive and economically-important lithium pegmatites have been described from the eastern flank of the large S-type peraluminous Leinster Granite batholith in southeast Ireland. This flank area is also the locus of a major dip-slip ductile shear zone which was active during emplacement of the Tullow Lowlands pluton of the batholith. All the known bedrock occurrences of lithium pegmatite are contained within this marginal deformation zone. Most previous studies have suggested derivation of the lithium pegmatites by fractionation from the Leinster Granite itself, though none are conclusive. More recently, an anatectic model has been proposed whereby the pegmatites were derived by melting of Li-rich sediments adjacent to the batholithic contact. Our investigation has been concerned with a detailed study of the Rb-Sr isotope systematics and trace element geochemistry of the pegmatites and their host granitoids in an attempt to resolve the problem of pegmatite genesis. The results suggest a strong geochemical and temporal coherence between the Leinster Granite and the lithium pegmatites. A model is proposed in which Li enrichment in residual magmas may be linked to the development of muscovite instead of biotite in the Leinster Granite itself. The Li excluded from entry to biotite then accumulates in highly mobile, low-viscosity pegmatitic fluids which migrate into the marginal shear zone of the Tullow Lowlands pluton where they crystallize at considerably lower temperatures.     

2003年云南大姚6.2级和6.1级地震余震S波分裂研究

利用2003年云南大姚6.2、 6.1级两次地震的余震资料对该区进行了S波分裂研究。 结果表明, 云南大姚地区的快剪切波偏振的优势方向约为N33°W, 与该区域的区域主压应力的方向一致。 通过对比6.2级余震和6.1级余震的偏振方向和延迟时间, 可以看到6.1级地震后明显的应力释放现象, 在几次强余震前, 均观测到延迟时间呈现增加的特征, 并且几次地震在即将发生之前的短时间内还观测到延迟时间有减小的现象, 这一现象符合震前应力长时间积累和短时间应力释放的结论, 时间延迟在强震前会出现下降具有重要的地震短临预测意义。 研究认为S波分裂参数可以反映区域应力场的动态变化信息, 为应力场研究与地震预测提供有用的信息。     

DGZ-1多功能共振柱常规试验可靠性分析

针对新研制的多功能共振柱讕验机常规土类试验,发展此类仪器的试验可靠性分析理论,建立一套检验自身可靠性的分析方法傌技术,包括试验误差分析、试验定量考核、土工试验等多种技术手段。首先建立了共振柱仪动剪切模量误差、应叐误差和阻尼比误差的分析公式,得到了几种主要影响因素及其对试验误差影响程度的新认识。同时,通过若干已知动剪切模量且频率和土频率相接近的钢杆和铝杆试件的自振和共振试验,定量上验证该仪器常规试验结果的可靠性;通过砂土和原状粘土常规试验,定性上检验土工试验结果的合理性。通过对新研制的多功能共振柱试验机的常规试验功能进行可靠性的自身检验,所有试验结果是令人满意和可靠的,结果符合现有规律的认识。