"政社分开"大背景下社会组织创新发展的思考与建议 ——以海洋社会组织为例

党的十九大以来,随着我国社会组织的不断发展和政府职能转变的逐步推进,社会组织面临着前所未有的机遇与挑战。文章以海洋社会组织为例,研究在"政社分开"过程中遇到的问题。研究表明,"政社分开"后,社会组织遇到的困难一是失去物质资源,难以正常开展活动;二是失去"主心骨",难以建立公信力;三是失去主要业务来源,发展内生动力不足。为新形势下社会组织如何更好地健康发展,提出了建立健全社会组织法律法规、加强对社会组织的扶持力度、拓展社会组织经费来源结构等对策建议。     

台风"碧利斯"的结构与江西暴雨诊断分析

利用T213资料、自动气象站加密资料和常规观测资料等,研究分析了0604号台风“碧利斯“的环流背景、移动路径、内部结构和外围暴雨的分布特征,并将其与0505号台风“海棠“、0513号台风“泰利“、0414号台风“云娜“,进行了对比分析.研究结果表明,台风暴雨与台风环流场、热力场的不对称有关,并不一定总是集中在环流中心附近.无论是对称结构,还是非对称结构,降水中心都与强对流云带位置相对应.“碧利斯“先西北行后向西折的路径,主要是受强大稳定的副热带高压引导,并表现为明显的不对称结构,东侧、南侧的积云对流较为旺盛,降水主要集中在移动路径的第三象限;850 hPa台风环流场表现为南部环流强盛,南海季风为西南急流的稳定维持提供了充沛的水汽条件;局地地形激发深厚的上升运动,进而产生庐山和赣南南部山区的大暴雨天气;垂直运动、散度、涡度、水汽通量、假相当位温等各物理量场,均与外围暴雨区有较好的对应关系.     

Variable hangingwall palaeotransport during Silurian and Devonian thrusting in the western Lachlan Fold Belt: Missing gold lodes,synchronous Melbourne Trough sedimentation and Grampians Group fold interference

The western margin of the Lachlan Fold Belt contains early ductile and brittle structures that formed during northeast‐southwest and east‐west compression, followed by reactivation related to sinistral wrenching. At Stawell all of these structural features (and the associated gold lodes) are dismembered by a complex array of later northwest‐, north‐ and northeast‐dipping faults. Detailed underground structural analysis has identified northwest‐trending mid‐Devonian thrusts (Tabberabberan) that post‐date Early Devonian plutonism and have a top‐to‐the‐southwest transport. Deformation associated with the initial stages of dismemberment occurred along an earlier array of faults that trend southwest‐northeast (or east‐west) and dip to the northwest (or north). The initial transport of the units in the hangingwall of these fault structures was top‐to‐the‐southeast. ‘Missing’ gold lodes were discovered beneath the Magdala orebody by reconstructing a displacement history that involved a combination of transport vectors (top‐to‐the‐southeast and top‐to‐the‐southwest). Fold interference structures in the adjacent Silurian Grampians Group provide further evidence for at least two almost orthogonal shortening regimes, post the mid‐Silurian. Overprinting relationships, and correlation with synchronous sedimentation in the Melbourne Trough, indicates that the early fault structures are mid‐ to late‐Silurian in age (Ludlow: ca 420–414 Ma). These atypical southeast‐vergent structures have regional extent and separate significant northeast‐southwest shortening that occurred in the mid‐Devonian (‘Tabberabberan orogeny’) and Late Ordovician (‘Benambran orogeny’).     

Structural and metamorphic evolution of the Moornambool Metamorphic Complex,western Lachlan Fold Belt,southeastern Australia

The wedge‐shaped Moornambool Metamorphic Complex is bounded by the Coongee Fault to the east and the Moyston Fault to the west. This complex was juxtaposed between stable Delamerian crust to the west and the eastward migrating deformation that occurred in the western Lachlan Fold Belt during the Ordovician and Silurian. The complex comprises Cambrian turbidites and mafic volcanics and is subdivided into a lower greenschist eastern zone and a higher grade amphibolite facies western zone, with sub‐greenschist rocks occurring on either side of the complex. The boundary between the two zones is defined by steeply dipping L‐S tectonites of the Mt Ararat ductile high‐strain zone. Deformation reflects marked structural thickening that produced garnet‐bearing amphibolites followed by exhumation via ductile shearing and brittle faulting. Pressure‐temperature estimates on garnet‐bearing amphibolites in the western zone suggest metamorphic pressures of ～0.7–0.8 GPa and temperatures of ～540–590°C. Metamorphic grade variations suggest that between 15 and 20 km of vertical offset occurs across the east‐dipping Moyston Fault. Bounding fault structures show evidence for early ductile deformation followed by later brittle deformation/reactivation. Ductile deformation within the complex is initially marked by early bedding‐parallel cleavages. Later deformation produced tight to isoclinal D₂ folds and steeply dipping ductile high‐strain zones. The S₂ foliation is the dominant fabric in the complex and is shallowly west‐dipping to flat‐lying in the western zone and steeply west‐dipping in the eastern zone. Peak metamorphism is pre‐ to syn‐D₂. Later ductile deformation reoriented the S₂ foliation, produced S₃ crenulation cleavages across both zones and localised S₄ fabrics. The transition to brittle deformation is defined by the development of east‐ and west‐dipping reverse faults that produce a neutral vergence and not the predominant east‐vergent transport observed throughout the rest of the western Lachlan Fold Belt. Later north‐dipping thrusts overprint these fault structures. The majority of fault transport along ductile and brittle structures occurred prior to the intrusion of the Early Devonian Ararat Granodiorite. Late west‐ and east‐dipping faults represent the final stages of major brittle deformation: these are post plutonism.     

Response of detrital zircon and monazite,and their U–Pb isotopic systems,to regional metamorphism and host‐rock partial melting,Cooma Complex,southeastern Australia

Progressive Early Silurian low‐pressure greenschist to granulite facies regional metamorphism of Ordovician flysch at Cooma, southeastern Australia, had different effects on detrital zircon and monazite and their U–Pb isotopic systems. Monazite began to dissolve at lower amphibolite facies, virtually disappearing by upper amphibolite facies, above which it began to regrow, becoming most coarsely grained in migmatite leucosome and the anatectic Cooma Granodiorite. Detrital monazite U–Pb ages survived through mid‐amphibolite facies, but not to higher grade. Monazite in the migmatite and granodiorite records only metamorphism and granite genesis at 432.8 ± 3.5 Ma. Detrital zircon was unaffected by metamorphism until the inception of partial melting, when platelets of new zircon precipitated in preferred orientations on the surface of the grains. These amalgamated to wholly enclose the grains in new growth, characterised by the development of {211} crystal faces, in the migmatite and granodiorite. New growth, although maximum in the leucosome, was best dated in the granodiorite at 435.2 ± 6.3 Ma. The combined best estimate for the age of metamorphism and granite genesis is 433.4 ± 3.1 Ma. Detrital zircon U–Pb ages were preserved unmodified throughout metamorphism and magma genesis and indicate derivation of the Cooma Granodiorite from Lower Palaeozoic source rocks with the same protolith as the Ordovician sediments, not Precambrian basement. Cooling of the metamorphic complex was relatively slow (average ～12°C/10⁶y from ～730 to ～170°C), more consistent with the unroofing of a regional thermal high than cooling of an igneous intrusion. The ages of detrital zircon and monazite from the Ordovician flysch (dominantly composite populations 600–500 Ma and 1.2–0.9 Ga old) indicate its derivation from a source remote from the Australian craton.     

Middle to early Late Ordovician hydrothermal veining in the Molong Volcanic Belt,northeastern Lachlan Fold Belt: Sedimentological evidence

Detrital volcanic and vein quartz, accompanied by felsic volcanic debris, occur as minor constituents in the Ordovician subduction‐related mafic volcanics of the Molong Volcanic Belt. In the western province of the Molong Volcanic Belt, detrital quartz is present in the three episodes of the mafic Volcanics. Volcanic quartz occurs in allochthonous limestone blocks in the Bendigonian Hensleigh Siltstone overlying the Mitchell Formation. The second volcanic episode (the Fairbridge Volcanics) commenced after a hiatus of approximately 20 million years and lasted around 10 million years from Darriwilian to Gisbornian time. Locally derived vein quartz, volcanic quartz and felsic detritus are concentrated at the bases of autochthonous Wahringa and Yuranigh Limestone Members of the volcanics and are extensive and abundant in basal beds of the regional Eastonian limestone body that transgressed over an eroded volcanic centre at Cargo. This early Eastonian debris, deposited early in an 8 million‐year volcanic hiatus preceding the final Ordovician Bolindian volcanism, establishes a pre‐Eastonian age for mineralisation at Cargo. It is inferred that the pauses in volcanism were preceded by magmatic fractionation, intrusion and hydrothermal activity and followed by erosion, subsidence and deposition of autochthonous limestones. Minor occurrences of vein and volcanic quartz are found in Bolindian volcanogenic sediments of the third volcanic phase. It is concluded that hydrothermal vein formation (and mineralisation by inference) was associated with pauses in volcanic activity throughout the Middle to early Late Ordovician over a wide area in the western province, culminating in the mineralisation at Cargo and Copper Hill near Molong. Volcanism in the eastern province of the Molong Volcanic Belt was continuous from at least Darriwilian to latest Ordovician time. Here, detrital hydrothermal vein quartz and volcanic quartz and felsic detritus are distributed through late Middle and early Late Ordovician turbidites of the Weemalla Formation. The possible existence of cycles in the source area like those of the Fairbridge Volcanics is masked by the distal nature of these deposits. Vein formation occurred in both provinces from late Middle Ordovician to early Late Ordovician, long before the formation of the world‐class mineral deposit at Cadia associated with the latest Ordovician Cadia Monzonite.     

Settling-velocity distributions and sorting processes on a longitudinal dune: A case study

The processes acting on a longitudinal dune are inferred from the response in the area size-sorting characteristics of the sediment of the active layer. The sediment size distributions are determined by settling and are best described by a log-hyperbolic model which provides the most information on size-sorting processes. Size-sorting characteristics are markedly different across the low round-crested part of the dune from cross-sections of the high more sharp-crested part. This results in changes in textural parameters along the lee-side consistent with changes in the lee-side separation vortex. This is the first time that the effect of wind speed up on the lee-side is observed to be reflected in the sediment; it can only be detected with the very sensitive log-hyperbolic parameters.     

佳木斯地体深部构造特征

本文通过重磁资料的数据处理和反演、天然地震震源的统计以及深断裂与火山活动关系的研究提出:佳木斯地体与两侧的造山带有着截然不同的地壳物质组成和构造类型,晚白垩世以来,其深部构造活动性较两侧更强。     

中国西北地区剪切波三维速度结构

本文研究区包括中国西北地区几个不同的构造单元,即准噶尔、阿尔泰、天山、内蒙古褶皱、塔里木盆地、柴达木和祁连山地区.从群速度和剪切波速度模型上可以看出,除塔里木具有十分明显的稳定构造体特征外,其它地区均具构造活动地区的特征,但其速度表现各具特点,并与它们的构造演化史有关.莫霍界面的起伏基本上控制了布格重力异常的分布;另外,天山地区与北山的速度结构在土地幔盖层中差别很大,天山的上地幔高速盖层可能与应力场有关.     

结构隔震的研究与应用综述

结构基底隔震是房屋免震的新方法，在国外，这种方法已应用于土建工程。本文介绍基底隔震研究的进展和应用情况。