Three-dimensional facies architecture analysis using sequence stratigraphy and seismic sedimentology: Example from the Paleogene Dongying Formation in the BZ3-1 block of the Bozhong Sag,Bohai Bay Basin,China

The Bohai Bay Basin is a classic non-marine rift basin in eastern China. The Paleogene Dongying sequences are the main hydrocarbon-bearing stratigraphic unit in the basin. Using three-dimensional (3-D) seismic data and one well control in the BZ3-1 Block in the western slope of the Bozhong Sag, we analyzed 3-D facies architectures of the Dongying sequences. The Dongying Formation, a second-order sequence, can be subdivided into four third-order sequences (from base to top: SQ1, SQ2, SQ3, and SQ4). The facies architecture was analyzed by using the seismic sedimentology approach based on 3-D seismic data. Sediment of the Dongying sequences was derived from the northern Shijiutuo Uplift via four major configurations of incised valleys, namely “V”, “U”, “W”, and composite shaped incised valleys. Seismic stratal slices reveal branching and converging characteristics of the channels from upstream to downstream. On the basis of an integrated analysis of well log, core data, seismic facies based on multi-seismic attributes, three sedimentary facies (e.g., “delta”, “fan-delta”, and “shore” or “shallow lacustrine” facies) have been recognized. The four types of incised valleys and their evolution control the sedimentary systems in the sedimentation area. The numbers and sizes of the fans are controlled by the sedimentary systems at various scales. Incised valley-fill and deltaic sand bodies are excellent hydrocarbon reservoirs and potentially good exploration targets for the study area. The reservoir quality of sequences SQ1, SQ2, and SQ3 become better gradually from base to top. The proposed sediment dispersal patterns may aid in the prediction of potential reservoir distribution. This study also demonstrates that facies architecture analysis using sequence stratigraphy and seismic sedimentology may serve as an effective approach for constructing 3D facies models for petroleum exploration in areas lacking of well or outcrop data.     

Neogene history of Bone Gulf,Sulawesi, Indonesia

Bone Gulf is one of the inter-arm basins of the unusual K-shaped island of Sulawesi. Its age, character and origin are disputed. This study is based on recently acquired 2D seismic lines, seabed multibeam mapping and limited well data, and is linked to stratigraphy on land. The gulf is probably underlain by pre-Neogene volcanogenic, sedimentary, metamorphic and ultramafic rocks, and includes crust of Australian origin. We favour basin initiation in the Miocene rather than Eocene, by extension associated with strike-slip deformation. The main basin trends N–S and is divided into several sub-basins and highs. The highs segment the gulf and their WNW–ESE orientations reflect pre-Neogene basement structures. They are interpreted as strike-slip fault zones active at different times in the Neogene. A southern high was active relatively early, whereas further north there is evidence of young displacements during the Late Neogene. These are visible on the seabed above a high linked to the Kolaka Fault on land. Early basin-bounding faults are oriented NNW–SSE and record extension and strike-slip movements, like the sub-parallel Walanae Fault of South Sulawesi which can be traced offshore into extensional faults bounding the young and narrow Selayar Trough. Sediment in the basins came mainly from the north with contributions from both west and east. Carbonate deposits formed at the margins while deeper marine sediments were deposited in the axial parts of the gulf. An Early Pliocene unconformity can be mapped across the study area marking major uplift of Sulawesi and subsidence of Bone Gulf. This regional event caused major influx of clastic sediments from the north, development of a southward-flowing canyon system, and back-stepping and drowning of carbonates at the basin margins. Hydrocarbons are indicated by seeps, and Bone Gulf has potential sources, reservoirs and seals, but the complex faulting history is a risk.     

Morphology,sedimentary infill and depositional environments of the Early Quaternary North Sea Basin (56°–62°N)

The North Sea Basin has been subsiding during the Quaternary and contains hundreds of metres of fill. Seismic surveys (170 000 km²) provide new evidence on Early Quaternary sedimentation, from about 2.75 Ma to around the Brunhes-Matuyama boundary (0.78 Ma). We present an informal seismic stratigraphy for the Early Quaternary of the North Sea, and calculate sediment volumes for major units. Early Quaternary sediment thickness is > 1000 m in the northern basin and >700 m in the central basin (total about 40 000 km³). Northern North Sea basin-fill comprises several clinoform units, prograding westward over 60 000 km². Architecture of the central basin also comprises clinoforms, building from the southeast. To the west, an acoustically layered and mounded unit (Unit Z) was deposited. Remaining accommodation space was filled with fine-grained sediments of two Central Basin units. Above these units, an Upper Regional Unconformity-equivalent (URU) records a conformable surface with flat-lying units that indicate stronger direct glacial influence than on the sediments below. On the North Sea Plateau north of 59°N, the Upper Regional Unconformity (URU) is defined by a shift from westward to eastward dipping seismic reflectors, recording a major change in sedimentation, with the Shetland Platform becoming a significant source. A model of Early Quaternary sediment delivery to the North Sea shows sources from the Scandinavian ice sheet and major European rivers. Clinoforms prograding west in the northern North Sea Basin, representing glacigenic debris flows, indicate an ice sheet on the western Scandinavian margin. In the central basin, sediments are generally fine-grained, suggesting a distal fluvial or glacifluvial origin from European rivers. Ploughmarks also demonstrate that icebergs, derived from an ice sheet to the north, drifted into the central North Sea Basin. By contrast, sediments and glacial landforms above the URU provide evidence for the later presence of a grounded ice sheet.     

Seismic and stratigraphic evidence for reef expansion and onset of aridity on the Northwest Shelf of Australia during the Pleistocene

Modern reef (the Great Barrier Reef and Ryukyu Reef) distribution in the Indo-Pacific region is strongly controlled by warm currents (East Australian and Kuroshio Currents) that radiate from the Indo-Pacific Warm Pool. The modern distribution of reefs (south of 15°S) on the Western Australian shelf is related to the presence of the warm Leeuwin Current. However, the age of the reefs south of 15°S, and hence their temporal relationship to the Leeuwin Current, has been largely unknown. Seismic and subsurface stratigraphic data show that reef growth and expansion on the Northwest Shelf of Australia began in the Middle Pleistocene (∼0.5 Ma). The oldest ooids in the region are approximately synchronous with reef growth. We suggest a two stage process for the spread of reefs to higher latitudes on the Western Australian coast; first an increase in Leeuwin Current activity at approximately 1 Ma brought warm waters and a tropical biota to the region; and second, increased aridity after ∼0.6 Ma led to a decline in clastic input and increased alkalinity, triggering ooid formation and reef expansion to higher latitudes associated with the switch to higher amplitude glacio-eustatic cycles at the end of the Middle Pleistocene Transition. The timing and mechanisms for reef expansion south along the Western Australian coast has implications for the origin of the Eastern Australian Middle Pleistocene Great Barrier Reef, the New Caledonia Barrier Reef and Japanese Ryukyu Reef systems.     

Late Pleistocene–Holocene seismic stratigraphy of Nha Trang shelf,central Vietnam

The late Pleistocene–Holocene stratigraphic architecture on the steep and narrow shelf off Nha Trang, central Vietnam has been explored by high resolution seismic profiles integrated with sediment core data. Sequence stratigraphic results reveal five major seismic units and three bounding surfaces which are composed of two distinctive sequences. Those sequences are bounded by two regional unconformities (SB1, SB2) which have been formed in respond to different sea-level regimes. The revealed relict beach–ridge deposits at water depth of about ∼130 m below the present water depth indicate that the Last Glacial Lowstand (LGM) sea-level in this area was lower than in neighboring areas and it probably resulted from subsidence due to high sedimentation rate and/or neotectonic movements of the East Vietnam Fault System. The late Pleistocene high amplitude of sea-level change during a long fourth-order and superimposed by shorter fifth-order cycle is the principal factor in reorganizing the formation of the Nha Trang continental shelf sequence. Other local controlling factors as fluctuations in sediment supply, morphological variations of the LGM surface, subsidence rate and hydrodynamic conditions provided the distinctive features of the Nha Trang shelf sequence stratigraphic model in comparison with neighboring other areas.     

基于灰色关联与模糊数学的重力式挡土墙震害评估

龙门山地区强震荷载导致大量已建边坡支挡结构严重受损,如何对震区受损挡土墙进行震害评估成为亟待解决的技术难点。本文首先通过对研究区挡土墙的震害分析,总结出其主要破坏模式包括滑移破坏、沉降破坏、倾覆破坏、墙身破坏以及越顶破坏5类。然后根据全面性、重要性以及科学性原则对影响震害评价的因子进行定性分析和分类,并结合挡墙的破坏模式,综合分析得到挡土墙安全评估的敏感性因子和一般因子。将震害范围60%作为挡墙评价的敏感性因子,而一般因子分为两级共10个指标,包括:滑移距离,沉降深度,倾斜角度,裂缝数量,裂缝长度比,开裂深度比,开裂宽度,错动距离,垮塌范围,覆盖范围。最后,采用灰色关联分析与模糊数学理论相结合的方法构建挡土墙震害评估体系,从而变事后处理为事先预防,为灾后恢复重建服务。     

Seismic structure of the Helan–Liupan–Ordos western margin tectonic belt in North-Central China and its geodynamic implications

We study high-resolution three-dimensional P-wave velocity (Vp) tomography and anisotropic structure of the crust and uppermost mantle under the Helan–Liupan–Ordos western margin tectonic belt in North-Central China using 13,506 high-quality P-wave arrival times from 2666 local earthquakes recorded by 87 seismic stations during 1980–2008. Our results show that prominent low-velocity (low-V) anomalies exist widely in the lower crust beneath the study region and the low-V zones extend to the uppermost mantle in some local areas, suggesting that the lower crust contains higher-temperature materials and fluids. The major fault zones, especially the large boundary faults of major tectonic units, are located at the edge portion of the low-V anomalies or transition zones between the low-V and high-V anomalies in the upper crust, whereas low-V anomalies are revealed in the lower crust under most of the faults. Most of large historical earthquakes are located in the boundary zones where P-wave velocity changes drastically in a short distance. Beneath the source zones of most of the large historical earthquakes, prominent low-V anomalies are visible in the lower crust. Significant P-wave azimuthal anisotropy is revealed in the study region, and the pattern of anisotropy in the upper crust is consistent with the surface geologic features. In the lower crust and uppermost mantle, the predominant fast velocity direction (FVD) is NNE–SSW under the Yinchuan Graben and NWW–SEE or NW–SE beneath the Corridor transitional zone, Qilian Orogenic Belt and Western Qinling Orogenic Belt, and the FVD is NE–SW under the eastern Qilian Orogenic Belt. The anisotropy in the lower crust may be caused by the lattice-preferred orientation of minerals, which may reflect the lower-crustal ductile flow with varied directions. The present results shed new light on the seismotectonics and geodynamic processes of the Qinghai–Tibetan Plateau and its northeastern margin.     

Lithospheric structure beneath the East China Sea revealed by Rayleigh-wave phase velocities

We explore the variations of Rayleigh-wave phase-velocity beneath the East China Sea in a broad period range (5–200 s). Rayleigh-wave dispersion curves are measured by the two-station technique for a total of 373 interstation paths using vertical-component broad-band waveforms at 32 seismic stations around the East China Sea from 6891 global earthquakes.The resulting maps of Rayleigh-wave phase velocity and azimuthal anisotropy provide a high resolution model of the lithospheric mantle beneath the East China Sea. The model exhibits four regions with different isotropic and anisotropic patterns: the Bohai Sea, belonging to the North China Craton, displays a continental signature with fast velocities at short periods; the Yellow Sea, very stable unit associated with low deformation, exhibits fast velocities and limited anisotropy; the southern part of the East China Sea, with high deformation and many fractures and faults, is related to slow velocities and high anisotropic signature; and the Ryukyu Trench shows high-velocity perturbations and slab parallel anisotropy.     

Assessment of soil–pile–structure interaction influencing seismic response of mid-rise buildings sitting on floating pile foundations

The role of the seismic soil–pile–structure interaction (SSPSI) is usually considered beneficial to the structural system under seismic loading since it lengthens the lateral fundamental period and leads to higher damping of the system in comparison with the fixed-base assumption. Lessons learned from recent earthquakes show that fixed-base assumption could be misleading, and neglecting the influence of SSPSI could lead to unsafe design particularly for structures founded on soft soils. In this study, in order to better understand the SSPSI phenomena, a series of shaking table tests have been conducted for three different cases, namely: (i) fixed-base structure representing the situation excluding the soil–structure interaction; (ii) structure supported by shallow foundation on soft soil; and (iii) structure supported by floating (frictional) pile foundation in soft soil. A laminar soil container has been designed and constructed to simulate the free field soil response by minimising boundary effects during shaking table tests. In addition, a fully nonlinear three dimensional numerical model employing FLAC3D has been adopted to perform time-history analysis on the mentioned three cases. The numerical model adopts hysteretic damping algorithm representing the variation of the shear modulus and damping ratio of the soil with the cyclic shear strain capturing the energy absorbing characteristics of the soil. Results are presented in terms of the structural response parameters most significant for the damage such as foundation rocking, base shear, floor deformation, and inter-storey drifts. Comparison of the numerical predictions and the experimental data shows a good agreement confirming the reliability of the numerical model. Both experimental and numerical results indicate that soil–structure interaction amplifies the lateral deflections and inter-storey drifts of the structures supported by floating pile foundations in comparison to the fixed base structures. However, the floating pile foundations contribute to the reduction in the lateral displacements in comparison to the shallow foundation case, due to the reduced rocking components.     

Andean earthquakes triggered by the 2010 Maule,Chile (Mw 8.8) earthquake: Comparisons of geodetic,seismic and geologic constraints

The Maule, Chile, (M_w 8.8) earthquake on 27 February 2010 triggered deformation events over a broad area, allowing investigation of stress redistribution within the upper crust following a mega-thrust subduction event. We explore the role that the Maule earthquake may have played in triggering shallow earthquakes in northwestern Argentina and Chile. We investigate observed ground deformation associated with the M_w 6.2 (GCMT) Salta (1450 km from the Maule hypocenter, 9 h after the Maule earthquake), M_w 5.8 Catamarca (1400 km; nine days), M_w 5.1 Mendoza (350 km; between one to five days) earthquakes, as well as eight additional earthquakes without an observed geodetic signal. We use seismic and Interferometric Synthetic Aperture Radar (InSAR) observations to characterize earthquake location, magnitude and focal mechanism, and characterize how the non-stationary, spatially correlated noise present in the geodetic imagery affects the accuracy of our parameter estimates. The focal mechanisms for the far-field Salta and Catamarca earthquakes are broadly consistent with regional late Cenozoic fault kinematics. We infer that dynamic stresses due to the passage of seismic waves associated with the Maule earthquake likely brought the Salta and Catamarca regions closer to failure but that the involved faults may have already been at a relatively advanced stage of their seismic cycle. The near-field Mendoza earthquake geometry is consistent with triggering related to positive static Coulomb stress changes due to the Maule earthquake but is also aligned with the South America-Nazca shortening direction. None of the earthquakes considered in this study require that the Maule earthquake reactivated faults in a sense that is inconsistent with their long-term behavior.