海洋平台复杂节点阴极保护电位分布的有限元法计算

了解阴极保护电位分布是合理设计阴极保护工程的必要条件和评价阴极保护效果的重要依据。本文应用有限元素法(FEM)计算海洋平台复杂节点表面的阴极保护电位分布。在实验室通过边界条件试验建立数学模型,计算海水中被保护的I,Y,K型复杂节点电位分布情况。计算结果与测量结果吻合得很好,说明FEM能够应用于海洋平台复杂节点阴极保护电位分布的计算,所获得的边界条件合理。     

Three-dimensional numerical simulation of obfique wave action on vertical walls

A three-dimensional numerical model based on the potential theory was developed to study the oblique wave action on vertical walls. A source term inside the domain was used to generate incident waves and outgoing waves were dissipated by sponge layers and transmitted by radiation boundaries. The finite difference method was used to solve the governing equations and boundary conditions in the regular transformed domain in σ-coordinate. Satisfactory agreements between the numerical predictions and experimental results of wave force were obtained. It is concluded that the maximum wave force acting on the vertical walls is induced by the obliquely incident waves rather than the normally incident waves.     

Wave Defending Effects of V-Type Bottom-Mounted Breakwaters

An analytical method is developed for the study of the wave defending effects of the V-type bottom-mounted breakwater. The breakwater is assumed to be rigid, thin, impermeable and vertically located in water of constant depth. The fluid domain is divided into three sub-regions by an imaginary interface. The velocity potential in each region is expanded by eigenfunctions. By satisfying the corresponding boundary conditions and matching conditions in and between sub-regions, a set of hnear algebraic equations can be obtained to determine the unknown coetfficients for the eigenfunction expansions for each sub-region. The accuracy of the present model is verified by a comparison with existing results for the case of an isolated breakwater. Numerical results, in the form of contour maps of the relative wave amplitude around the breakwater, are presented for a range of wave and breakwater parameters. The results show that the V-type bottommounted breakwater is generally effective in defending against waves. In general, the wave height in the protected area is about 20-50 percent of the incident wave height.     

浮体间距对多浮体系统水动力系数的影响

根据三维线性势流理论，采用格林函数法，对多浮体系统的水动力系数进行了数值分析。数值算例中给出了在固定波频下水动力系数与浮体间相对位置关系曲线。水动力系数的变化幅度随着浮体间距离增大而变小。随着浮体间距的变化，水动力系数极值的出现具有明显的规律，相邻的极大值(或极小值)的间距为半个波长或一个波长。     

Distribution of the Neogene Utsira Sand and the succeeding deposits in the Viking Graben area, North Sea

The sandy quartzose parts of the Utsira Formation, the Middle Miocene to mid Pliocene Utsira Sand, extends north–south along the Viking Graben near the UK/Norwegian median line for more than 450 km and 75–130 km east–west. The Utsira Sand is located in basin-restricted seismic depocentres, east of and below prograding sandy units from the Shetland Platform area with Hutton Sands. The Utsira Sand reaches thicknesses up to ca. 300 m in the southern depocentre and 200 m in the two northern depocentres with sedimentation rates up to 2–4 cm/ka. Succeeding Plio–Pleistocene is divided into seismic units, including Base Upper Pliocene, Shale Drape, Prograding Complex and Pleistocene. The units mainly consist of clay, but locally minor sands occur, especially at toes of prograding clinoforms (bottom-set sands) and in the Pleistocene parts, and the total thickness covering the Utsira Sand is in most places more than 800 m, but thins towards the margins.     

Analysis of seabed instability using element free Galerkin method

Wave-induced seabed instability, either momentary liquefaction or shear failure, is an important topic in ocean and coastal engineering. Many factors, such as seabed properties and wave parameters, affect the seabed instability. A non-dimensional parameter is proposed in this paper to evaluate the occurrence of momentary liquefaction. This parameter includes the properties of the soil and the wave. The determination of the wave-induced liquefaction depth is also suggested based on this non-dimensional parameter. As an example, a two-dimensional seabed with finite thickness is numerically treated with the EFGM meshless method developed early for wave-induced seabed responses. Parametric study is carried out to investigate the effect of wavelength, compressibility of pore fluid, permeability and stiffness of porous media, and variable stiffness with depth on the seabed response with three criteria for liquefaction. It is found that this non-dimensional parameter is a good index for identifying the momentary liquefaction qualitatively, and the criterion of liquefaction with seepage force can be used to predict the deepest liquefaction depth.     

湄洲湾泥沙活动及海底冲淤变化

湄洲湾沙源少,海水含沙量低,平均值10～20g/m~3。冬季受东北季风及浙闽沿岸流影响,湾口含沙量高,达到34g/m~3;夏季受径流影响,湾内含沙量相对偏高,达到16g/m~3。泥沙的运移趋势:主航道基本朝外,两侧朝里。受强潮流作用,深槽及水下潮流冲沟受到冲刷,斜坡及潮坪略有淤积。     

泰利台风对台湾东北黑潮入侵东海陆架影响的研究

本文利用卫星高度计数据和分析数据,并结合同时期现场深水潜标的流速观测数据,研究了超强台风泰利过境前后台湾东北附近海域流场、位势密度场、位势涡度场以及黑潮入侵东海陆架强度的变化。分析结果表明,泰利台风通过改变台湾东北陆坡附近海域的流场、位势密度场,显著地削弱(增强)了西段(东段)陆坡附近的位势涡度梯度,从而使得西段(东段)陆坡黑潮入侵东海陆架的强度显著增强(减弱)。此外,本文还区分了台湾东北西部陆坡附近表层的跨陆坡“上凸型”位势涡度分布与次表层的跨陆坡“下凹型”位势涡度分布,并认为次表层的跨陆坡“下凹型”位势涡度分布也应作为台湾东北西部陆坡附近“位势涡度障碍”的重要组成部分。本文的研究结果揭示了大气中的台风过程对台湾东北黑潮入侵东海陆架产生显著影响的关键过程及机制,相关结论可为台湾东北黑潮入侵东海陆架变化规律的研究提供有价值的参考。     

Scour at the head of a vertical-wall breakwater

This paper presents the results of an experimental investigation on the near-bed flow patterns, the bed shear stress amplification and scour around the head of a vertical-wall breakwater, using regular waves. The Keulegan-Carpenter number (KC), based on the diameter of the breakwater head, is found to be the major parameter that governs the flow and the equilibrium scour depth. Basic flow structures are identified as function of KC. The scour depth is found to increase with increasing the Keulegan-Carpenter number. The necessary extent of the conventional stone protection is studied. An empirical formula is worked out for the width of the protection layer as function of KC. Also, the effects of head shape, the angle of attack and the presence of a co-directional current are investigated. The results indicate that the scour depth is increased considerably in the presence of a current. Likewise, the scour depth is increased when the head shape is changed from a round shape to a sharp-edged one. It is found that the angle of attack is also an influencing factor as regards the scour depth.