Fundamental study for morphodynamic modelling: Sand mounds in oscillatory flows

Experiments on sand mounds in oscillatory flow, undertaken in controlled, large-scale laboratory conditions, have produced well-defined data sets for model comparison. Three bathymetries with different levels of submergence, including a surface-piercing case, were tested. The maximum slope was about 1:5.5. Sediment transport is due to bed load with ripple formation. The principal time-dependent bulk parameters are the vertical distance of the centre of gravity above the base and the volume of the mound. A semi-implicit finite-volume depth-averaged hydrodynamic model is used to drive morphodynamics, using van Rijn's sediment flux model generalized to take account of bed slope, and some justification is given for depth-averaged modeling in these conditions. Starting the model runs with the conditions at the end of the first cycle avoided initial atypical physical behaviour. In general good predictions were obtained with an angle of repose reduced from the standard value of about 30° for stationary beds to 15°. For these situations, morphodynamics was largely unaffected by a hydrodynamic roughness height in the range 2.5D₅₀ to 51D₅₀, with larger values accounting for ripple roughness. The reduced angle of repose may be physically expected with mobile beds but this specific value is only expected to be suited to this form of bed motion. In one case an exaggerated ripple formed near the top of the mound reducing agreement with experiment. For the submerged case with normal ripple structure excellent predictions were obtained. For the initially surface-piercing mound, the time of submergence was better predicted with a 30° angle of repose, presumably due to the prominent influence of the near stationary bed near the wet/dry interface, although long term predictions were better predicted with 15°. The occurrence of vortex shedding in the first cycle modeled was in agreement with experimental observation.     

循环流化床燃煤脱硫剂技术研究现状及开发前景

本文论述了循环流化床在煤燃烧领域中的优势地位,并着重阐述了国内外循环流化床脱硫技术研究与脱硫剂开发利用状况,指出了在脱硫剂应用方面与国外的差距,提出了脱硫剂生产的产业化发展方向。     

Interfacial instability of sand patterns induced by turbulent shear flow

When a turbulent shear flow above a plane sand surface entrains sand grains,it generates a variety of sand patterns.Fluvial sand forms two major interfacial patterns:meso-scale dunes and antidunes,and large-scale bars.Measurements have evidenced that under erosive conditions,meso-scale patterns either change to or coexist with large-scale patterns.However,it remains elusive what exactly drives the switching of interfacial patterns and how the switching occurs.Here,we showdcombing a flow model with a grain transport model,allowing for both the surface and suspended sand fluxes dthat the switching of patterns emerges from the shear-driven complex feedback between grain transport and topographic perturbations.The switching predominantly depends on the magnitudes of the Rouse number and the grain size to undisturbed flow depth ratio.The model offers quantitative predictions of the maximum amplification of sand patterns and unveils a new attraction erepulsion phenomenon.     

Application of a Bayesian model to infer the contribution of coalbed natural gas produced water to the Powder River,Wyoming and Montana

The Powder River Basin (PRB) of Wyoming and Montana contains significant coal and coal bed natural gas (CBNG) resources. CBNG extraction requires the production of large volumes of water, much of which is discharged into existing drainages. Compared to surface waters, the CBNG produced water is high in sodium relative to calcium and magnesium, elevating the sodium adsorption ratio (SAR). To mitigate the possible impact this produced water may have on the quality of surface water used for irrigation, the State of Montana passed water anti‐degradation legislation, which could affect CBNG production in Wyoming. In this study, we sought to determine the proportion of CBNG produced water discharged to tributaries that reaches the Powder River by implementing a four end‐member mixing model within a Bayesian statistical framework. The model accounts for the ⁸⁷Sr/⁸⁶Sr, δ¹³C_DIC, [Sr] and [DIC] of CBNG produced water and surface water interacting with the three primary lithologies exposed in the PRB. The model estimates the relative contribution of the end members to the river water, while incorporating uncertainty associated with measurement and process error. Model results confirm that both of the tributaries associated with high CBNG activity are mostly composed of CBNG produced water (70–100%). The model indicates that up to 50% of the Powder River is composed of CBNG produced water downstream from the CBNG tributaries, decreasing with distance by dilution from non‐CBNG impacted tributaries from the point sources to ~10–20% at the Montana border. This amount of CBNG produced water does not significantly affect the SAR or electrical conductivity of the Powder River in Montana. Copyright © 2013 John Wiley & Sons, Ltd.     

大气降水热液成矿——西秦岭某硅、灰、泥岩型铀矿床成矿模式探讨

西秦岭某硅、灰、泥岩型层控铀矿床是在矿源层(中志留统)的基础上,由地下水热液渗滤改造而成。铀的工业富集发生在矿源层褶皱成陆之后,成矿高峰则发生在中、新生代交替时期。成矿溶液是受大气降水补给的地下水热液;成矿物质主要来自矿源层本身。矿源层长期遭受地下水热液作用,溶液中大量的铀酰离子形成稳定的碳酸铀酰络合物,并被运移至岩性和构造的圈闭部位,通过吸附和共沉淀等作用富集,或通过还原、水解和过饱和沉淀等作用形成沥青铀矿或再生铀黑。该层控铀矿床的整个成矿过程具有典型的逐级增量特点,属于塔式累积成矿的基本模式,后生富集是成矿的关键。     

On the modelling of sand bedforms using the semivariogram

This study shows the usefulness of the semivariogram for modelling sand ripples created by water flows of varied flow intensity. A combination of two mathematical functions is fitted to each sample semivariogram, that is an exponential (or stochastic) component and a periodic component. The parameters of each of these components have direct physical meaning. A non-dimensional ratio combining the two parameters of the exponential model is interpreted as a regularity index (which increases with the degree of regularity of bedform arrangement). This regularity index is inversely related to the Froude number of the flow. The non-dimensional wavelength, estimated from the dominant periodic function, is also inversely and closely related to the Froude number. The wave height, accurately estimated from properties of the two fitted components, is a direct function of flow velocity and is also proportional to the standard deviation of bed elevations. The bedform shape introduces a considerable discrepancy between the generally assumed normal frequency distribution and the empirical distributions of bed height. The series of bed elevations are generally characterized by a mixture of normal distributions having the same variance but different means. The calculation of a covariance assuming a constant and single mean (as in spectral analysis) can therefore be misleading and the problem may be avoided by using the semivariogram.     

滇中郝家河砂岩铜矿的地球化学及其成因意义

本文论术字滇中生代地层与矿区及春外围马头山组中铜的时空分布与迁移富集规律，揭示了矿床的沉积－后期叠加改造成因。成矿作用经历了同生沉积形成矿源层，后期叠加改造形成矿体的过程。后期改造中铜元素发生了大量迁移，矿质主要来自矿体之下伏紫色矿源层。     

Age Assignment of the Lycoptera- bearing Bed

In the Yanliao area, the occurrence of the Nestoria-Keratestheria fauna and the Eoparacypris- Luanpingella-Darwinula assemblage in the Dabeigou Formation s.s., a Rb-Sr isochron age of 145.2 Ma for the Baiqi Formation and a complete stratigraphic sequence-all this proves that the Lycoptera-bearing bed overlies the Upper Jurassic. The Jehol fauna comprises the primitive Trigonioidids fauna, Eosestheria fauna, Lycoptera fauna et al., and their own laws of evolution expound that they belong to Cretaceous faunas. The associations of Eosestheria with Yanjiestheria, Lycoptera with Eosestheria, and Kuntulunia with Yanjiestheria as well as the occurrence of early angiosperms and sporo - pollen in the Fuxin Formation and its equivalents also demonstrate that the Lycoptera-bearing, bed should be assigned to the Cretaceous. The confirmation of the existence of Aucellina in the Jixi Group and the correlation of Trigonioidids and Cypridids with those in the equivalent strata of Japan and Western Europe have also been     

北京市北山泥石流分布规律及形成过程

北京北山泥石流的分布受构造控制，呈北东方向展布。其分布在时间上和空间上均有一定的规律可寻。一条泥石流沟谷的形成从开始到结束，概括分为形成、位移和堆积。区内泥石流的形成主要有三种形式：以水力侵蚀为主，以坡面侵蚀为主和以沟源崩、滑塌形式触发沟床物质活动而形成的泥石流。     

海底热液成矿作用

根据近二三十年海底地质考察结果,海底热液成矿作用非常普遍,可以形成铜、铅、锌、金、银、铁、硫、重晶石、萤石、锑、汞和硼等海底热液矿床.按容矿岩石不同,可分为与火山岩系有关的及与沉积岩有关的两大类矿床类型.