新生代辉绿岩侵入对围岩物性的影响:以苏北盆地洋心次凹为例

传统观念认为岩浆活动区是油气勘探的禁区,但现今理论研究与实践勘探发现岩浆侵入作用能够显著改造围岩物性。目前岩浆侵入对围岩具体的影响认识不清,查明岩浆侵入影响围岩物性的机理对油气勘探具有重要意义。以苏北盆地洋心次凹的丰页1井为例,结合测井、地震及岩心等资料重点分析辉绿岩侵入对围岩储层物性与储集空间的改造,深入讨论其影响机制。苏北地区丰页1井的辉绿岩在吴堡运动期(约59 Ma)开始顺层侵入,侵入体中心相为辉长岩,侵入体边缘相为辉绿岩,变质相为板岩,上变质带厚度大于下变质带厚度。围岩由非渗透性泥岩转变为油气储层,储集空间为辉绿岩侵入和泥岩变质过程中产生的裂缝与孔隙。辉绿岩的侵入显著提高围岩储层物性,主要的机制有变质固结、热液破裂、冷凝收缩和溶蚀作用4种,其中热液破裂和溶蚀作用对储层的形成最为关键。     

岩脉多次侵入条件下斜坡变形破坏模式及稳定性分析

岩质斜坡受到花岗岩脉的多次侵入,坡体结构和岩体结构均有较大的改变,因此斜坡的变形破坏模式和稳定性均有可能发生变化。本文以雅砻江中游楞古水电站坝址区嘎夏帕斜坡为例,对多次花岗岩脉侵入条件下斜坡的变形破坏模式和稳定性进行分析。嘎夏帕斜坡原本为陡倾中薄层砂岩组成的逆向坡,岩体完整性较好,稳定性较高; 由于受到花岗岩脉的多次侵入,坡体变成砂岩和岩脉互层的结构,在岩脉挤压作用下,大部分岩体呈碎裂状,完整性差,坡体的变形模式由弯曲-倾倒式变为挡墙溃决式。中部完整性较好的砂岩成为挡墙,和前部岩脉一起阻止后部大方量碎裂状岩体下滑,但是随着前部脉体的失稳破坏,斜坡有可能发生挡墙溃决式整体滑坡。并通过数值模拟软件3DEC进行了验证,计算结果与定性分析一致。本文的结论可以为此类斜坡的稳定性分析和防治提供理论支持,具有一定的参考价值和实际意义。     

卧龙湖煤矿岩浆蚀变煤层中汞的分布与赋存特征

系统采集淮北卧龙湖煤矿岩浆蚀变煤层中岩浆岩、煤及顶底板岩石样品,测试分析了样品中汞、灰分、挥发分、水 分以及各形态硫的含量,探讨了岩浆蚀变煤层中汞的分布与赋存特征。结果表明：（1） 岩浆侵入导致煤中灰分升高,挥发 分降低,煤中硫主要以黄铁矿硫和有机硫存在;（2） 岩浆侵入导致煤中汞的富集,卧龙湖煤矿岩浆蚀变煤层中汞的平均含 量高达0.23×10-6,是华北石炭-二叠纪煤、中国煤以及美国煤中汞的平均含量的1.4 倍,1.2 倍和1.3 倍;（3） 煤中汞的含量 随离岩浆侵入体距离增大有逐渐降低的趋势,但在煤岩接触带附近,汞在岩浆侵入体上方和下方的煤中呈现不同的分布特 征;（4） 煤中的汞主要以无机结合态的形式存在,且大部分赋存在煤中的黄铁矿中,同时亦存在与有机硫结合的汞。岩浆 热液对煤层的侵入,导致煤质以及煤中汞的含量和赋存方式发生了显著变化。     

New interpretation of the Franciscan mélange at San Simeon coast,California: tectonic intrusion into an accretionary prism

Many concepts and interpretations on the formation of the Franciscan mélange have been proposed on the basis of exposures at San Simeon, California. In this paper, we show the distribution of chaotic rocks, their internal structures and textures, and the interrelationship between the chaotic rocks and the surrounding sandstones (turbidites). Mélange components, particularly blueschists, oceanic rocks, including greenstone, pillow lava, bedded chert, limestone, sandstone, and conglomerate, have all been brecciated by retrograde deformation. The Cambria Slab, long interpreted as a trench slope basin, is also strongly deformed by fluidization, brecciation, isoclinal folding, and thrusting, leading us to a new interpretation that turbiditic rocks (including the Cambria Slab) represent trench deposits rather than slope basin sediments. These rocks form an accretionary prism above mélanges that were diapirically emplaced into these rocks first along sinistral-thrust faults, and then along dextral-normal faults. Riedel shear systems are observed in several orders of scale in both stages. Although the exhumation of the blueschist blocks is still controversial, the common extensional fractures and brecciation in most of the blocks in the mélanges and further mixture of various lithologies into one block with mélange muddy matrix indicate that once deeply buried blocks were exhumed from considerable depths to the accretionary prism body, before being diapirically intruded with their host mélange along thrust and normal faults, during which retrograde deformation occurred together with retrograde metamorphism. Recent similar examples of high-pressure rock exhumation have been documented along the Sofugan Tectonic Line in the Izu forearc areas, in the Mineoka belt in the Boso Peninsula, and as part of accretionary prism development in the Nankai and Sagami troughs of Japan. These modern analogues provide actively forming examples of the lithological and deformational features that characterize the Franciscan mélange processes.     

对二郎坪群火神庙组物质组成的质疑与再认识

经研究证明，前人建立的二郎坪群火神庙组确有少量的亚碱性双峰式火山岩。这些火山岩零星地分布在几个地区，走向不连续，出露宽度一般为数百米。构成该组主体的是一条规模宏伟的侵入岩带，其岩石组合为辉长岩－闪长岩－石英闪长岩－斜长花岗岩－花岗岩，总体上表现为正序岩浆演化序列。这些侵入岩普遍经历了三个阶段的变形变质作用，即第一阶段为韧性变形；第二阶段为静态重结晶；第三阶段为带状褶劈理，表现了复杂而漫长的构造演化史。     

Statistical approach to determine the salinized ground water flow path and hydrogeochemical features around the underground LPG cavern,Korea

The ground water flow path of the coastal area in the Yellow Sea, Korea, was interpreted using both the cross‐correlation analysis of hydraulic properties and the principal component analysis (PCA) of ground water chemistry. Data was obtained from observation wells in the underground liquefied petroleum gas (LPG) cavern constructed in the coastal area of Pyeongtaek. Cross‐correlation results showed that the operating pressure became more influenced on artificial factors for the variation of the groundwater level of the study area (45–66% of correlation coefficient) even though its affecting area was limited to the region with fractures or faults, and also showed that the delay time from the variation of operating pressure to the fluctuation of ground water level were relatively long periods (28–31 days). Three hydrogeochemical events (encrusted cement dissolution, host rock dissolution, and seawater intrusion), which were dominantly influenced on ground water quality, could be induced from the result of PCA. Quantitative evaluation for these events using the mixed equation with principal component scores suggest that the dissolution of encrusted cement materials was the predominant factor (39·0% of the total mixed proportion) to change the chemical composition of the seepage water during the ground water flow from the observation wells to the cavern. Integration of the statistical results also imply that ground water flow and hydrogeochemistry were predominantly affected by artificial factors such as cavern operation pressure and dissolution of encrusted cement materials, which were interdependent factors on the observation wells with high cross‐correlation coefficients and pH. Copyright © 2007 John Wiley & Sons, Ltd.     

高挂山—牛头寨地区小型环形影象构造分析及其找矿意义

高挂山—牛头寨地区,通过大比例尺航片解译,发现6个大小不等的小型环形影象信息。这些环形影象与岩浆活动、已知矿床、矿化点、重砂异常、物化探异常等的分布有着内在的联系。为预测找矿远景区和找隐伏矿床提供了影象依据。     

Optimal and sustainable extraction of groundwater in coastal aquifers

Four examples are investigated for the optimal and sustainable extraction of groundwater from a coastal aquifer under the threat of seawater intrusion. The objectives and constraints of these management scenarios include maximizing the total volume of water pumped, maximizing the profit of selling water, minimizing the operational and water treatment costs, minimizing the salt concentration of the pumped water, and controlling the drawdown limits. The physical model is based on the density-dependent advective-dispersive solute transport model. Genetic algorithm is used as the optimization tool. The models are tested on a hypothetical confined aquifer with four pumping wells located at various depths. These solutions establish the feasibility of simulating various management scenarios under complex three-dimensional flow and transport processes in coastal aquifers for the optimal and sustainable use of groundwater.     

Geometry and growth of sill complexes: insights using 3D seismic from the North Rockall Trough

Doleritic sill complexes, which are an important component of volcanic continental margins, can be imaged using 3D seismic reflection data. This allows unprecedented access to the complete 3D geometry of the bodies and an opportunity to test classic sill emplacement models. The doleritic sills associated with basaltic volcanism in the North Rockall Trough occur in two forms. Radially symmetrical sill complexes consist of a saucer-like inner sill at the base with an arcuate inclined sheet connecting it to a gently inclined, commonly ragged, outer rim. Bilaterally symmetrical sill complexes are sourced by magma diverted from a magma conduit feeding an overlying volcano. With an elongate, concave upwards, trough-like geometry bilaterally symmetrical sills climb away from the magma source from which they originate. Both sill complex types can appear as isolated bodies but commonly occur in close proximity and consequently merge, producing hybrid sill complexes. Radial sill complexes consist of a series of radiating primary flow units. With dimensions up to 3 km, each primary flow unit rises from the inner saucer and is fed by primary magma tube. Primary flow units contain secondary flow units with dimensions up to 2 km, each being fed by a secondary magma tube branching from the primary magma tube. Secondary flow units in turn are composed of 100-m scale tertiary flow units. A similar branching hierarchy of flow units can also be seen in bilaterally symmetrical sill complexes, with their internal architecture resembling an enlarged version of a primary flow unit from a radial sill complex. This branching flow pattern, as well as the interaction between flow units of varying orders, provides new insights into the origin of the structures commonly seen within sill complexes and the hybrid sill bodies produced by their merger. The data demonstrate that each radially symmetrical sill complex is independently fed from a source located beneath the centre of the inner saucer, grows by climbing from the centre outwards and that peripheral dyking from the upper surface is a common feature. These features suggest a laccolith emplacement style involving peripheral fracturing and dyking during inner saucer growth and thickening. The branching hierarchy of flow units within bilaterally symmetrical sill complexes is broadly similar to that of primary flow units within a radially symmetrical sill complex, suggesting that the general features of the laccolith emplacement model also apply.Editorial responsibility: J. Stix     

Petrology and structure of the Palaeoproterozoic (1.9 Ga) Rytky nickel sulphide deposit,Central Finland: a comparison with the Kotalahti nickel deposit

The Palaeoproterozoic (1.9 Ga) Rytky and Kotalahti mafic-ultramafic intrusions are located in the contact zone between the Archaean craton and Proterozoic supracrustal rocks. During the second deformation event (D₂) the surrounding country rocks were subjected to intensive metamorphism and deformation associated with the Svecofennian orogeny; the Archaean/Proterozoic boundary controlled both D₂ thrusting and magma ascent. Emplacement of the Rytky and Kotalahti intrusions took place at the culmination of D₂, as shown by the gneiss inclusions with S₂ schistosity within the intrusions. Overthrusting continued after emplacement, with detached fragments of the bodies incorporated into the Archaean gneisses. During the third deformation event (D₃) the originally subhorizontal intrusions were rotated into a subvertical position, so that they now have their stratigraphic top towards the west. The Rytky intrusion is composed mainly of medium- and coarse-grained lherzolite, websterite and gabbronorite. The nickel deposit with pentlandite as the main nickel mineral is associated with the lherzolite and websterite. The coarse-grained lherzolite, websterite and melagabbro represent the first rocks to form, and they contain the nickel sulphide mineralisation. Country rock contamination, as indicated by high TiO₂, P₂O₅, Rb, Zr and light rare earth element contents (LREE), is most pronounced in the marginal part of the intrusion, which was the first to form. The variation in olivine composition (Fo 78.6-84.77 mole %; Ni 630–2386 ppm) and the metal ratio of the sulphide (Ni/Co 19.3 – 50.3) along with the internal stratigraphy of the intrusion indicate an in-situ process of sulphide ore formation.Editorial handling: P. LightfootAn erratum to this article can be found at