High‐frequency subbottom reflection types and lithologic and physical properties of sediments

Abstract

Eight types of reflections are interpreted from 3,800 km of 3.5 kHz profiles taken over a 25,000 km² area of the upper continental slope and shelf in the northeastern Gulf of Mexico off Panama City, Florida. The corresponding sediments in five of the reflection types were sampled in 77 piston cores from which data were obtained on in situ acoustic velocities (V), bulk densities (gr), sediment texture (mean grain size = Mz), CaCO₃ content (C), sedimentary structures, and gross sediment composition. A distinct bottom echo with numerous subbottom reflectors (Type I) is observed in deeper areas where terrigenous clay or lutite (Mgi = 9.9 to, gr = 1.4 g/cc, porosity (P) = 74 percent, C = 28 percent, and V (upper 2 m) = 1,435 m/s) predominates. Type I reflection grades upslope into Type IV, which shows a distinct bottom echo with fewer subbottom reflectors, and the corresponding sediment is a foraminiferal silty clay (mz = 9.4 to, gr = 1.43 g/cc, P = 73 percent, V = 1,447 m/s, and C = 37 percent). The uppermost slope gives indistinct, semiprolonged bottom echoes with faint subbottoms (Type VI) where calcareous silt (Mz = 6.6 to, gr = 1.57 g/cc, P = 65 percent, C = 70 percent, and V = 1,482 m/s) is the main sediment type. The shelf sediments (gr = 1.66 g/cc, P = 58 percent, V = sl1,530 m/ s), varying from coarse silt (Mz = 5.3 to) to very coarse sand (Mz = ‐0.3 to) and 25 to 100 percent carbonate, show indistinct, semiprolonged bottom echoes with intermittent or mushy subbottoms (Type VII). Prolonged echoes with no subbottoms (Type VIII) are observed in areas where algal sands of variable grain size (Mz ‐ ‐0.9 to 2.7 to, gr = 1.66 g/cc, P = 59 percent, V = 1,530 to 1,690 m/s) occur.

The major trends in reflection types (loss in depth of penetration, loss in number of reflectors, and prolongation of initial bottom reflections) follow gradients of sedimentary and physical properties of the sediments, which are increases in mean grain size, bulk density, in situ acoustic velocity, CaCO₃ content, and decrease in porosity. Increases in the reflection coefficient and attenuation of the sound energy in the shelf sediments are probably important factors in the observed decrease in the depth of penetration of the sound energy in the shelf sediments.     

Measuring bioavailable metals using diffusive gradients in thin films (DGT) and transplanted seaweed (Fucus vesiculosus), blue mussels (Mytilus edulis) and sea snails (Littorina saxatilis) suspended from monitoring buoys near a former lead–zinc mine in West Greenland

Measuring loads of bioavailable metals is important for environmental assessment near mines and other industrial sources. In this study, a setup of monitoring buoys was tested to assess loads of bioavailable metals near a former Pb–Zn mine in West Greenland using transplanted seaweed, mussels and sea snails. In addition, passive DGT samplers were installed. After a 9-day deployment period, concentrations of especially Pb, Zn and Fe in the species were all markedly elevated at the monitoring sites closest to the mine. Lead concentrations in all three species and the DGT-Pb results showed a significant linear correlation. Zinc and Fe concentrations were less correlated indicating that the mechanisms for Zn and Fe accumulation in the three species are more complex. The results show that there is still a significant load of metals from the mine and that such buoys can be an adequate method to assess present loads of bioavailable metals.     

徐州矿区采空塌陷区公路工程地质灾害与防治对策分析

煤矿采空塌陷是影响徐州地区区域规划与交通建设的重要环境岩土工程问题。本文对徐州东部、西部及北部矿区的工程地质特征进行了研究,并分析了采空塌陷区公路灾害类型与特点,提出了相应的灾害防治对策。     

EIAs,power and political ecology: Situating resource struggles and the techno-politics of small-scale mining

Academics across disciplines are increasingly employing political ecology lenses to unpack conflicts related to resource extraction. Yet, an area that remains under-researched and under-theorised is how environmental impact assessments (EIAs) are embedded in politics and imagined as sites of power relations. Drawing on long-term fieldwork in Zimbabwe engaging small-scale gold miners, EIA consultants and government officials, this article examines the changing social significance of EIAs during and after a nationwide police operation that was framed by authorities as targeting non-compliance with environmental policy, illegal mining and illicit trading. Among other articulations of dissent, small-scale miners associations protested that EIA enforcement rhetoric served unjustly as a rationale for halting livelihoods and extracting rent from miners in times of economic difficulty. The article challenges EIA narratives that focus narrowly on risk management or governance failure, exploring technocratic obfuscations and how enforcement rhetoric was perceived in relation to criminalisation and coercion, expert environmental consultancy cultures and adapted legacies of colonial practice in contemporary dynamics of rule. Heavy-handed policing under the banner of enforcing order impinged on livelihoods and had counterproductive effects in addressing environmental problems, while complying with expensive EIA report-producing requirements was far beyond the means of most small-scale miners. The article rethinks how technical EIA rhetoric becomes entangled in spaces of contentious politics, the perils of looking only at particular scales of relations to the exclusion of others, and what it means to re-engage Donald Moore’s notion of “shifting alignments and contingent constellations of power.” Suggesting future directions in political ecology theorising in relation to extractive sectors, it calls for careful attention to the situated politics of EIAs – situated in time and space, amid varying relations of power – and how multiple hegemonic practices are conceptualised and challenged.     

A procedural framework for robust environmental management of deep-sea mining projects using a conceptual model

Robust environmental management of deep-sea mining projects must be integrated into the planning and execution of mining operations, and developed concurrently. It should follow a framework indicating the environmental management-related activities necessary at each project phase, and their interrelationships. An environmental management framework with this purpose is presented in this paper; it facilitates the development of environmental information and decision-making throughout the phases of a mining project. It is based environmental management frameworks used in allied industries, but adjusted for unique characteristics of deep-sea mining. It defines the gathering and synthesis of information and its use in decision-making, and employs a conceptual model as a growing repository of claim-specific information. The environmental management activities at each phase have been designed to enable the implementation of the precautionary approach in decision making, while facilitating review of adaptive management measures to improve environmental management as the quantity and quality of data increases and technologies are honed. This framework will ensure fairness and uniformity in the application of environmental standards, assist the regulator in its requirements to protect the environment, and benefit contractors and financiers by reducing uncertainty in the process.     

Geochemical investigations of slags from the historical smelting in Freiberg, Erzgebirge (Germany)

The Freiberg area in the Saxon Erzgebirge (Ore Mountains) represents one of the oldest mining districts in Germany. Argentiferous ore mineralizations with lead, zinc and copper are dominating in this region. Various waste products of mining can be found around Freiberg. In particular, the slags from ore smelting were and are regarded as unusable waste products. However, they preserve information on the smelting and weathering behaviour of slag, which makes them very useful sources of information for our purposes. To reconstruct the chemical processes during ore smelting, historical slag represents a most valuable archive. Therefore, the historical slag dump in Halsbach (Germany) was examined exemplarily for the Freiberg deposit. The slag was dumped approx. 400 years ago and is rich in lead. An interrelation between the slag and the metallurgical process applied can be made on the basis of chemical composition, appearance and microscopic results. The slags of the heap in Halsbach contain high concentrations of heavy metals (average contents in mg kg⁻¹: Zn 40,000; Pb 10,000; Cu 1500; U 1000). Enrichments of heavy metals in the organic-rich soil horizons within the range of the dump foot (maximum contents in the A-horizon in mg kg⁻¹: Zn 3719; Pb 9198; As 3017; Cu 963) imply a faint discharge of metals from the dump.     

A numerical investigation of rock pillar failure mechanism in underground openings

The study of rock pillar failure mechanisms is an issue that is faced routinely in mining and civil industries. In mining operation, the establishment of several mining levels is often necessary to ensure adequate production. This result in the formation of pillars that must be recovered under often high stress conditions at later stages of excavation. It is, therefore, beneficial to develop guidelines that can be used in the design of rock pillars. The aim of this paper is to delve into the mechanisms involved in pillar failure as well as to investigate the non-linear behavior of rock pillars. An extensive numerical analysis was carried out to study the pillar deformation and failure process under natural loading conditions. Effects of pillar geometry and pillar strength parameters on pillar behavior were investigated for hard rock material typical of Canadian mining conditions. Numerical data were compared against field data recorded in Canadian mines. A fairly good match was achieved between numerical and field data and the conducted analysis can be used as a qualitative guideline in the design of rock pillars in underground structures.     

Neuro-fuzzy modelling in mining geochemistry: Identification of geochemical anomalies

Local and mine scale exploration models for anomaly recognition within known ore fields are discussed. Traditional geochemical exploration methods are based on multivariate statistical analysis, metallometry, vertical geochemical zonality and criteria of natural field geochemical associations, which suffer several shortcomings, including lack of a geostatistical generalised approach for separating anomalies from background. These shortcomings make the interpretation process time consuming and costly. Fuzzy set theory, fuzzy logic and neural network techniques seem very well suited for typical mining geochemistry applications. The results, obtained from applying the proposed technique to a real scenario, reveals significant improvements, comparing the results obtained from applying multivariate statistical analysis. Computationally, the introduced technique makes possible, without exploration drilling, the distinction between blind mineralisation and zone of dispersed ore mineralisation. The methodology developed in this research study has been verified by testing it on various real-world mining geochemical projects.     

Concentration and spatial variability of mercury and other heavy metals in surface soil samples of periurban waste mine tailing along a transect in the Almadén mining district (Spain)

Mercury (Hg) is one of the elements with increasing environmental significance. A total of 22 samples (soils, rocks and gels) were collected along a 6 km transect around the Valdeazogues River valley in the southwest of the Iberian Peninsula (Almadén, Spain). Samples were characterized by different soil types of depositional sequences associated with mining tailings, type and system tracts: 15 surface soil samples included in the transect; 3 of a Haploxerept soil profile developed on slates; 2 of quartzite and slates rocks (reference rocks in the area). Moreover, two of a gel substance (in the lower tract of the river). Soil samples were analyzed for Hg, Cu, Ni, Cr, V, Pb, Cd and As, as well as for organic matter, pH abrasion and calcium carbonate content. All samples were collected from the Almadén mining district. The level of occurrence of the elements (especially Hg) and the effect of some properties on its concentration distributions were investigated. The total mercury contents varied in the range 7,315–3.44 mg kg⁻¹. The mean concentration of total mercury in soils and rocks was 477.03 mg kg⁻¹dry mass. This value is very high compared to the regional background value of other areas. Only rarely is it higher than 1%: in one sample (7,315 mg kg⁻¹) it was almost eight times in comparison with the affected zones, with a high value of 1,000 mg kg⁻¹. Significant differences between samples were found in the total content of mercury. A large percentage of the samples registered detectable levels of V, Cr, Ni, Pb, As and Cu. Cd readings were below the detectable range for all samples tested. Cr mean concentration was 216.95 mg kg⁻¹ (minimun concentration 86, maximun 358); V mean concentration was 119.09 mg kg⁻¹ (minimun concentration 69, maximun 1,209); As mean concentration was 51.24 mg kg⁻¹ (minimun 13.3 and maximun 319.4); Ni mean concentration was 45.64 mg kg⁻¹ (minimun concentration 21.2 and maximun 125.6); Cu mean concentration was 33.25 mg kg⁻¹ (minimun concentration 19.3 and maximun 135); Pb mean concentration was 15.19 mg kg⁻¹ (minimun 1.12 and maximun 1013). Metal distribution generally showed spatial variability ascribed to significant anthropogenic perturbation by mining tailing type. Hg showed vertical profile characterized by surface enrichment, with concentrations in the upper layer (93.7–82.2 mg kg⁻¹ in front of 3.4 of the rock value) exceeding, in several occasions, the background value. The results obtained denote a potential toxicity of some heavy metals in some of the studied samples. Water-soluble mercury could enter the aquatic system and accumulate in sediments. Mercury and other heavy metals contamination depended on the duration and intensity of mining activities.     

The impact of disposal and treatment of coal mining wastes on environment and farmland

In China, coal mining wastes have traditionally been dumped in cone-shaped heaps that have the potential to pollute air, soil and water environments and landscapes through dust generation, leachate production, self-ignition and as a consequence of an absence of vegetation cover. Since 1980s, the disposal technique for coal mining wastes has been changing and in many instances the wastes are now transported directly to subsided land as a fill to enable the reuse of that land. Thus, today, both coal mining waste dumps from the past and filled subsided lands are in existence. However, the comparative impacts of these different disposal techniques on the environment and farmland productivity have not been studied in detail. Using Dongtan (DT), Nantun (NT) and Xinglongzhuang (XLZ) coal mines as examples, the components of coal mining wastes and their potential pollution contribution to soil, surface water and ground water are tested in-situ. The results show that contaminants are released after self-ignition and weathering of coal mining wastes, but they are not above the allowable environmental standards. However, despite these findings, more and closer attention needs to be paid to the mobility, transportation and accumulation of these contaminants in the environment over time.