中国南方下寒武统黑色岩系及其地质研究意义

黑色岩系是C、N、P、S、O和一些重金属的循环链,既是一种矿产资源,又是环境因素的良好载体.以我国南方下寒武统为例,讨论黑色岩系的地质研究意义,提出黑色岩系的重点研究方向.     

煤层气赋存的分形特征研究

本文利用红外热成像手段,对微小煤样内的甲烷吸附区进行了观察,并评估其吸附特征与在煤中的分布规律.研究表明煤中存在不同尺度与甲烷吸附能力的甲烷富集区,吸附/解吸甲烷时,甲烷富集区比邻近区域具有更明显的升温/降温现象.通过图像处理的方法对不同吸附压力条件下的红外热像图中的甲烷富集区进行提取,采用盒维数进行统计发现甲烷富集区符合分形规律.试验表明随着吸附压力升高,甲烷富集区的分形维数增大,分布初值减小.对两个不同煤田的煤层气富集区进行统计表明：从微米级到千米级尺度范围内,甲烷富集区分布具有分形特征,且分形维数均在1.5~2.00之间.     

长江中游沙质河段床沙级配调整过程计算

三峡工程运用后,长江中游荆江河段持续冲刷,床沙与推移质、悬移质泥沙不断交换,从而造成该河段床沙发生不同程度的调整,对长江中下游河床演变及非平衡输沙机理的研究具有重要影响.在新水沙条件下,总结分析了沙波运动特性及床沙交换方式,引入Markov三态转移概率及非均匀沙隐暴系数,得到基于状态转移概率的沙质河段床沙级配调整的计算模型.研究结果表明:(1)20092014年,沙市站年内床沙中值粒径有先增大后减小的趋势,而监利站年内床沙中值粒径则先减小后增大,且荆江河段年际床沙中值粒径总体呈上升趋势,粗化程度约为6.9%~9.3%;(2)20092014年,沙市站床沙组成中粒径d<0.062 mm的泥沙所占比重不变,0.062 mm≤d<0.25 mm的泥沙所占比重逐年减少(累计减少11.4%),d≥0.25 mm的泥沙所占比重逐年增加(累计增加11.4%),而监利站床沙组成均存在波动性变化;(3)荆江河段床沙转换为推移质的概率随着泥沙粒径的增大而增大,床沙转换为悬移质的概率随着泥沙粒径的增大而减小,而推移质和悬移质转换为床沙的概率均随着泥沙粒径的增大而增大,河床发生冲刷粗化时泥沙输移的主要形式为悬移质(概率为81%~87%),而淤积细化时床沙补给主要来源于推移质(概率为8%~12%).通过验证,本文概率模型的计算结果与实测资料符合较好,能够应用于长江中游沙质河段年际床沙粗化及年内床沙级配调整过程预报,为进一步开展三峡工程下游非均匀悬移质泥沙沿程恢复机理的研究提供理论基础.     

Transition from wavelets to ripples in a laboratory flume with a diverging channel

An experimental investigation on the initiation and development of bed forms on a bed of fine silica sand was conducted under alluvial flow conditions in a laboratory flume with a diverging channel. The main aims of the study were to assess： i） the steepness of bed forms in the transition stage of development; and ii） the threshold height of wavelets （ηt） that triggered the start of ripple development. Detailed bed profile measurements were carried out using an acoustic Doppler probe, traversed longitudinally over the sediment bed at various experimentation times. The bed form dimensions were extracted from such bed profile records and analysed for the wavelet, transition and equilibrium stages. It was found that the steepness of ripples in the transition and equilibrium stages were similar, confirming predictions of previous mathematical model simulations. A lognormal distribution fitted the wavelet length data. The wavelet threshold height was estimated as ηt ≈ 7 mm, or ηt≈ 80 in wall units. Such a height magnitude suggested that ripple development could be triggered by the wavelets reaching the outer flow zone of a turbulent boundary layer. The ηt value obtained corresponded generally to the intersection point between two predictive equations for bed form dimensions. A formulation was developed to predict ηt as a function of the sediment grain size, which was confirmed for the fine sand used in this study.     

Numerical Simulation of Bed Separation Development and Grout Injecting into Separations

In this paper, the Cosserat theory that has been incorporated into a three dimensional finite element code COSFLOW, is applied to analyze the development of bed separations in the layered overburden and grout injection into the bed separations. The mechanism of bed separation development during the longwall mining is investigated. A parametric study is carried out to investigate the effect of major factors including hard rock grade, panel height and panel weight on bed separation development. Based on the modeling, a conceptual model to describe the development process of bed separation is proposed. The effect of grout injecting into the bed separations on subsidence reduction is also studied and the conclusion agrees well with the common realization.     

EFFECTS OF SEDIMENT GRADATION ON THE GEOMETRY OF RIVER DELTAS

l INTRODUCTlONIn this study, formation of alluvial deltas was treated as a river-dominated type of topograPhy process,caused simply by sediment deposition from a channel into a wide basin. The influences of waves, tides,and density differences related to coastal effects were excluded. There have been numerous experimentalstUdies on river delta problems. For examPle, Shieh et al. (1988, 1997) used coarse sediment asexperimental material and revealed the development and the geometric simil…     

GRAVEL SLUICING IN ALPINE RUN-OF-RIVER HYDROPOWER PLANTS

1 INTRODUCTIONNdsral rivers entering reservoirs carry also sediment, partly as bedload and patly in suspension. At theentrance of the reservoir flow velocity is considerably reduced and the capability of sediment transport isdrashcally fading. Bedload maerial is deposited totally at the reservoir entrance fondng a delta, material...in suspension is cAned further intO the reservoir ulh.. it is partly deposited and partly dischargedthrough the dam towards downstreaxn (depending on the trapp…     

EXPERIMENTAL STUDY ON SALTATION OF SOLID GRAINS IN FLOWING WATER

This paper deals with the saltation of bed-load solid grains in flowing water. Experiments have been carried out by means of high-speed photographing and advanced data processing techniques while the analysis is made by combined method of mechani- cal and statistical theories. Experiments reveal that saltation is the main form of the bed-load transport under ordinary flow conditions. Taking successive saltation as the model of bed-load transport, systematic analysis has been made with regard to the forces acting on grains and the variation of their magnitudes along the saltation trajec- tories to obtain the kinematic and dynamic properties of these grains. The statistical analysis shows that the probability density functions of the relative height and length of saltation are in conformity with distribution, while the probability density functions of the relative velocities of saltation are in conformity with the Gaussian distribution.     

SEDIMENT PROBLEMS AT DUJIANGYAN PROJECT

1. THE GEOGRAPHICAL ENVIRONMENT AND HISTORICAL PERSPECTIVE OF THEPROJECTIn the western part of Sichuan Basin, between the Longmen Mountain in the west and theLongquan Mountain in the southeast, lies an alluvial plain of 6500 kmZ formed by the Minjiang Riversystem known as the Chengdu Plain. With its mild climate (average annual temperature 16' 4 C ),fertile soils, rich water resources, and the densely interconnected system of Minjiang and TuojiangRivers, Chengdu …     

Bed changes at toe of inclined seawalls

This study was carried out to investigate the scour phenomenon at the toe of seawalls and the different parameters that affected it. Experiments were achieved using different wave steepnesses, bed material grain sizes, wall positions and inclinations. Based on experimental results, the parametric plots of toe scour for smooth impermeable inclined seawalls were prepared. Also, this paper presents the bed changes prediction at seawalls toe using artificial neural networks on the basis of experimental data to widen the range of application. Suitability of using a neural network model was developed, and a model was validated. It is proposed that this model can be used in coastal engineering applications.