Link between SSZ ophiolite formation, emplacement and arc inception, Northland, New Zealand: U–Pb SHRIMP constraints; Cenozoic SW Pacific tectonic implications

New U–Pb age-data from zircons separated from a Northland ophiolite gabbro yield a mean ²⁰⁶Pb/²³⁸U age of 31.6 ± 0.2 Ma, providing support for a recently determined 28.3 ± 0.2 Ma SHRIMP age of an associated plagiogranite and  29–26 Ma ⁴⁰Ar/³⁹Ar ages (n = 9) of basalts of the ophiolite. Elsewhere, Miocene arc-related calc-alkaline andesite dikes which intrude the ophiolitic rocks contain zircons which yield mean ²⁰⁶Pb/²³⁸U ages of 20.1 ± 0.2 and 19.8 ± 0.2 Ma. The ophiolite gabbro and the andesites both contain rare inherited zircons ranging from 122–104 Ma. The Early Cretaceous zircons in the arc andesites are interpreted as xenocrysts from the Mt. Camel basement terrane through which magmas of the Northland Miocene arc lavas erupted. The inherited zircons in the ophiolite gabbros suggest that a small fraction of this basement was introduced into the suboceanic mantle by subduction and mixed with mantle melts during ophiolite formation.

We postulate that the tholeiitic suite of the ophiolite represents the crustal segment of SSZ lithosphere (SSZL) generated in the southern South Fiji Basin (SFB) at a northeast-dipping subduction zone that was initiated at about 35 Ma. The subduction zone nucleated along a pre-existing transform boundary separating circa 45–20 Ma oceanic lithosphere to the north and west of the Northland Peninsula from nascent back arc basin lithosphere of the SFB. Construction of the SSZL propagated southward along the transform boundary as the SFB continued to unzip to the southeast. After subduction of a large portion of oceanic lithosphere by about 26 Ma and collision of the SSZL with New Zealand, compression between the Australian Plate and the Pacific Plate was taken up along a new southwest-dipping subduction zone behind the SSZL. Renewed volcanism began in the oceanic forearc at 25 Ma producing boninitic-like, SSZ and within-plate alkalic and calc-alkaline rocks. Rocks of these types temporally overlap ophiolite emplacement and subsequent Miocene continental arc construction.     

Three-dimensional sedimentary architecture of Quaternary sand and gravel resources: a case study of economic sedimentology (SW Germany)

Quaternary sands and gravels form important, yet often highly heterogeneous economic deposits. Detailed 3-D analysis of the sedimentary structure and stratigraphy of these deposits allows for an accurate estimation of exploitable material. This paper presents a case study in SW Germany reconstructing the 3-D distribution of glacial sediments based on a high-resolution, process-orientated sedimentary facies classification and lithostratigraphy integrated within the geo-modelling package gOcad. Situated along the maximal ice-extent of the Rhine glacier during the last glaciation, the study area is characterised by a morphologically prominent terminal moraine and its associated sandur, which form the stratigraphically youngest sediments of a glacial basin, partially exposed in two gravel pits. These outcrops helped to reconstruct the complex sedimentary architecture of the northern part of the glacial basin. The regional analysis is based on core data, as well as geoelectric and geomagnetic surveys. All data were integrated into km-scale, high-resolution geological 3-D models, depicting the large-scale dynamics of multiple glacier advances and retreats during the Early to Late Pleistocene. These models allow quantifying the thickness and volume distribution of exploitable sandy gravel and help to evaluate the occurrence of non-exploitable interbedded diamicton horizons. The high quality and quantity of gravels particularly north of the terminal moraine classifies the investigated area as very prospective for raw materials exploitation in the future.     

Mode of formation of the Nile Gorge in northern Egypt: a study by DEM‐SRTM data and GIS analysis

This is an overview of the mode of formation of the Nile Gorge in northern Egypt. It is based on the interpretation of the Shuttle Radar Topography Mission (SRTM) data along with detailed analysis of landsat image, geological map and seismic data. The results show that the current course of the Nile was caused by a differential uplift of two plateaus: Ma'aza, to the east, and Western Desert plateau, to the west of the river. This uplift is caused by dynamic forces resulting from subsurface convection processes. It also contributed to the formation of several drainage systems, basins and structural features. Abundant faults and fractures that are parallel to the Nile Valley on both flanks that are associated with uplift are proven to be contemporaneous with formation of the river. We conclude that understanding of the uplift is crucial to visualizing the Nile course and its geodynamic formation. The information derived from the SRTM data reveals invaluable knowledge in support of the presented remotely sensed geological features. The paper clearly explains the stages of formation of the Nile segments in space and time and structural controls on the path of the Nile River in Egypt. Copyright © 2015 John Wiley & Sons, Ltd.     

Diagenesis in the Middle Jurassic Khatatba Formation sandstones in the Shoushan Basin,northern Western Desert,Egypt

The Middle Jurassic Khatatba Formation acts as a hydrocarbon reservoir in the subsurface in the Western Desert, Egypt. This study, which is based on core samples from two exploration boreholes, describes the lithological and diagenetic characteristics of the Khatatba Formation sandstones. The sandstones are fine‐ to coarse‐grained, moderately to well‐sorted quartz arenites, deposited in fluvial channels and in a shallow‐marine setting. Diagenetic components include mechanical and chemical compaction, cementation (calcite, clay minerals, quartz overgrowths, and a minor amount of pyrite), and dissolution of calcite cements and feldspar grains. The widespread occurrence of an early calcite cement suggests that the Khatatba sandstones lost a significant amount of primary porosity at an early stage of its diagenetic history. In addition to calcite, several different cements including kaolinite and syntaxial quartz overgrowth occur as pore‐filling and pore‐lining cements. Kaolinite (largely vermicular) fills pore spaces and causes reduction in the permeability of the reservoir. Based on framework grain–cement relationships, precipitation of the early calcite cement was either accompanied by or followed the development of part of the pore‐lining and pore‐filling cements. Secondary porosity development occurred due to partial to complete dissolution of early calcite cements and feldspar. Late kaolinite clay cement occurs due to dissolved feldspar and has an impact on the reservoir quality of the Khatatba sandstones. Open hydraulic fractures also generated significant secondary porosity in sandstone reservoirs, where both fractures and dissolution took place in multiple phases during late diagenetic stages. The diagenesis and sedimentary facies help control the reservoir quality of the Khatatba sandstones. Fluvial channel sandstones have the highest porosities and permeabilities, in part because of calcite cementation, which inhibited authigenic clays or was later dissolved, creating intergranular secondary porosity. Fluvial crevasse‐splay and marine sandstones have the lowest reservoir quality because of an abundance of depositional kaolinite matrix and pervasive, shallow‐burial calcite and quartz overgrowth cements, respectively. Copyright © 2013 John Wiley & Sons, Ltd.     

Note on the isotopic geochemistry of fossil-lacustrine tufas in carbonate plateau—A study from Dungul region (SW Egypt)

Lithological, chemical, and stable isotope data are used to characterize lacustrine tufas dating back to pre-late Miocene and later unknown times, capping different surfaces of a Tertiary carbonate (Sinn el-Kedab) plateau in Dungul region in the currently hyperarid south-western Egypt. These deposits are composed mostly of calcium carbonate, some magnesium carbonate and clastic particles plus minor amounts of organic matter. They have a wide range of (Mg/Ca)_molar ratios, from 0.03 to 0.3. The bulk-tufa carbonate has characteristic isotope compositions: (δ¹³C_mean = −2.49 ± 0.99‰; δ¹⁸O_mean = −9.43 ± 1.40‰). The δ¹³C values are consistent with a small input from C4 vegetation or thinner soils in the recharge area of the tufa-depositing systems. The δ¹⁸O values are typical of fresh water carbonates. Covariation between δ¹³C and δ¹⁸O values probably is a reflection of climatic conditions such as aridity. The tufas studied are isotopically similar to the underlying diagenetic marine chalks, marls and limestones (δ¹³C_mean = −2.06 ± 0.84‰; δ¹⁸O_mean = −10.06 ± 1.39‰). The similarity has been attributed to common meteoric water signatures. This raises large uncertainties in using tufas (Mg/Ca)_molar, δ¹³C and δ¹⁸O records as proxies of paleoclimatic change and suggests that intrinsic compositional differences in material sources within the plateau may mask climatic changes in the records.     

Microchemical Characterization of Natural Gold and Copper Alloys from the Ancient Um Shashoba Gold Mine,South Egypt

The SEM-EDX technique was applied to investigate Au, and Cu＋Sn alloyed grains in the mineralization of the Um Shashoba mine for achieving further understanding of occurrences, internal structures and microchemistry of Au and Cu alloys and associated minerals, and mineralization type. This study is aiming at the genetic history of ore-bearing fluid events, geochemical evaluation and exploration significance. The results showed that the mineralization could be considered as a single major episode generated by metamorphic mesothermal solution rich in sulfides and unsaturated respect to Au. It was differentiated into many stages; started with formation of auriferous pyrite that was pseudomorphed by secondary hematite, limonite and goethite. Three phases of Au alloy were precipitated, and Cu＋Sn and Ag-rich alloys were produced respectively and followed by deposition of two generations of barren pyrite. Calcite and ankerite were crystalized, surrounded and partially replaced some of early formed minerals. Finally, barren muscovite recrystallized around and inside both later formed carbonate minerals that were free of any sign of Au in their structures. The processes of deformation, recrystallization, annealing, dissolution, remobilization and re-precipitation played the most important roles in the genetic history of the mineralization.     

从西南天山超高压变质带多期构造变形看天山古生代构造演化

通过对西南天山阿克雅孜和木扎尔特地区高压-超高压变质带构造几何学和岩石变形相关运动学的详细剖析,厘定出高压-超高压变质岩石及其相关围岩的构造单元。详细研究表明,研究区可划分为三个构造单元:北部单元、中部单元和南部单元。确定了每个构造单元的构造几何学特征及各个构造单元之间的相互关系。通过分析岩石变形特征和叠加关系,确定了岩石所记录多期变形的运动学特征。根据研究区的多期构造变形特点,建立了阿克雅孜和木扎尔特河地区构造演化序列。共划分出四期构造可识别的事件(E1-E4),分别代表了E1:高压-超高压岩石折返过程;E2:高压-超高压岩石造山带的早期改造过程;E3:北部构造事件对高压-超高压造山带影响;E4:走滑构造对高压-超高压造山带的叠加。沿造山带系列构造分析表明,西南天山高压-超高压带中发育的四期构造事件沿中天山北缘具有很好的一致性,各期构造事件也有一定的横向可对比性。在此基础上通过对多期变形事件的构造背景的探讨,建立了整个天山在古生代的构造拼合过程,揭示我国西部洋壳相关的深俯冲造山带形成过程和参与深俯冲作用(超)高压变质岩的变形变质历史。     

Adaptation to climate change in desertified lands of the marginal regions in Egypt through sustainable crop and livestock diversification systems

Environmental degradation resulting from current climate changes, including prolonged drought, land degradation, desertification, and loss of biodiversity, is presenting enormous challenges to achieve ...     

Depositional system and palaeoclimatic interpretations of Middle to Late Pleistocene travertines: Kocabaş, Denizli,south‐west Turkey

Travertine deposits in western Turkey are very well‐exposed in the area of Kocaba?, in the eastern part of the Denizli Basin. The palaeoclimatic significance of these travertines is discussed using U/Th dates, stable isotope data and palynological evidence. The Kocaba? travertine occurrences are characterized by successions of depositional terraces associated with palaeosols and karstic features. The travertines have been classified into eight lithotypes and one erosional horizon, namely: laminated, coated bubble, reed, paper‐thin raft, intraclasts, micritic travertine with gastropods, extra‐formational pebbles and a palaeosol layer. The analysed travertines mostly formed between 181 ka and 80 ka (Middle to Late Pleistocene) during a series of climatic changes including glacial and interglacial intervals; their δ¹³C and δ¹⁸O values indicate that the depositional waters were mainly of basinal thermal origin, occasionally mixed with surficial meteoric water. Palynological results obtained from the palaeosols showed an abundance of non‐arboreal percentage and xerophytic plants (Oleaceae and Quercus evergreen type) indicating that a drought occurred. Marine Isotope Stage 6 is represented by grassland species but Marine Isotope Stage 5 is represented by Pinaceae–Pinus and Abies, Quercus and Oleaceae. Uranium/thorium analyses of the Kocaba? travertines show that deposition began in Marine Isotope Stage 6 (glacial) and continued to Marine Isotope Stage 4 (glacial), but mostly occurred in Marine Isotope Stage 5 (interglacial). The travertine deposition continued to ca 80 ka in the south‐west of the study area, in one particular depression depositional system. Palaeoenvironmental indicators suggest that the travertine depositional evolution was probably controlled by fault‐related movements that influenced groundwater flow. Good correlation of the stable isotope values and dates of deposition of the travertines and palynological data of palaeosols in the Kocaba? travertines serve as a starting point for further palaeoclimate studies in south‐west Turkey. Additionally, the study can be compared with other regional palaeoclimate archives.