芦山MS7.0地震究竟发生在哪里？

精心挑选速度模型和观测资料,利用逆时成像技术对2013年4月20日发生在四川芦山的M_S7.0地震的起始破裂点和震源中心进行成像.成像结果表明,地震的起始破裂点位于北纬30.289±0.005°,东经102.946±0.007°,震源深度11.8±2.3 km;震源中心在前3.5 s时间内与破裂起始点相同,在前9.5 s时间内也基本稳定在北纬30.27°和东经102.94°,距起始破裂点不远,意味着芦山M_S7.0地震呈双侧破裂.     

四川省芦山MS7.0地震发震构造分析

2013年4月20日的芦山“4·20”MS7.0地震发生在龙门山断裂带西南段,震中地区分布多条NE向断裂,构造较为复杂.这次地震震源机制解显示为逆冲型地震,破裂面为NE走向,与龙门山断裂带的运动性质和走向一致.地表调查只在大川-双石断裂(前山断裂)和新开店断裂(大邑断裂南段)发现局部分布的NE向地表裂缝、沿地表裂缝分布的喷砂冒水和砂土液化,不规则的边坡开裂等地表变形,以及断裂沿线较严重的滑坡崩塌和房屋破坏.野外调查没有发现明显的地震地表破裂.GPS测量结果显示,此次地震的发震断裂位于芦山县城附近或其以东,而芦山西侧的断裂也可能参与了部分活动.根据野外地质调查、GPS观测、震源机制解、震源深度、余震分布等结果综合判定,芦山7.0级地震的主要发震构造是芦山之下、大川-双石断裂和新开店断裂之间的龙门山前缘滑脱带.此滑脱带在该段的运动导致了这次地震的发生,并可能带动了它上面的大川-双石和新开店等断裂的活动.     

2013年芦山MS7.0地震序列参数的早期 特征: 传染型余震序列模型计算结果

为考察2013年4月20日芦山M_S7.0地震震后序列参数的早期特征, 利用“传染型余震序列”(ETAS)模型和最大似然法进行了参数估计. 设定截止震级M_c=M_L2.0, 拟合时段为震后0.31—24.12天, 计算获得α=1.89, p=1.22, 同时利用最大似然法估计获得b=0.72. 与中国大陆地区其它中强震的余震序列参数的比较表明, 芦山M_S7.0地震序列参数表现为触发次级余震的能力较弱和序列衰减速率较快的特征, 反映出余震区相对较高的应力水平. 为检测结果的稳定性, 设定不同的截止震级M_c以及不同的拟合截止时间, 分别进行参数拟合和参数标准差估计. 结果表明, M_c的选取对α值影响明显, 对p值影响则较小. 此外, 震后10天内获得的参数拟合结果随时间变化较为明显, 而其后各参数变化总体较为平稳.      

2013年芦山MS7.0地震震源参数特征 及近断层强地面运动初步估计

2013年4月20日在我国四川省雅安市芦山县发生了M_S7.0地震, 破坏最严重的宝兴、 芦山等极震区烈度达到Ⅷ—Ⅸ度. 该文针对芦山M_S7.0地震震源参数的特征, 结合相关经验关系, 对本次地震的震源特征进行了初步分析. 结果表明, 芦山M_S7.0地震为断层动态摩擦过程中的应力下调模式. 进一步应用Brune圆盘模型对芦山M_S7.0地震近场强地面运动的理论值进行估算, 并基于加速度和速度的估算结果计算极震区的最大烈度, 约为Ⅷ—X度, 与实测的极震区最大烈度Ⅸ度较为接近. 选取宝兴和芦山为特征计算点, 构建动态复合震源模型, 对近断层区域内宝兴和芦山两个特征点进行了模拟计算. 模拟结果显示, 近断层区域强地面运动呈现持续时间短、 高频成分多等特征.      

四川芦山7.0级地震及其与汶川8.0级地震的关系

2013年4月20日在四川省雅安市芦山县发生M7.0级地震.根据四川省台网资料和收集的国内外相关资料,我们分析了芦山地震的基本参数、余震分布、序列衰减等特征.结果表明:芦山地震位于龙门山断裂南段,其震源力学机制显示为纯逆冲性质,与龙门山断裂构造特征相符合;芦山地震的余震较丰富,震后15天震区已发生7800多次余震,其中,5级以上余震4次,最大余震是4月21日17时5分芦山、邛崃交界M5.4级地震;余震分布形成的图形显示其长轴走向与龙门山断裂构造走向一致,余震分布显示密集区长轴约40 km,短轴约20 km.与汶川M8.0级地震在震源力学机制、破裂过程、余震空间展布以及地表破裂等对比分析后表明:芦山地震与汶川地震的震源错动类型、破裂过程、地表破裂以及余震活动等特征存在明显差异;芦山地震与汶川地震震中位置相距90 km,两次地震的余震密集区相距50 km;汶川8.0级地震造成龙门山断裂中北段较充分破裂,芦山7.0级地震则展布于龙门山断裂南段且破裂尺度有限;两者有发震构造上的联系,但两次地震是相对独立的地震事件.     

丽江7.0级地震丽江县城房屋震害分析

本简述丽江７．０级地震造成的丽江县城钢筋砼框架、砖混结构和单层空旷房屋的震害，研究了房屋的特征，对震害的原因作了初步分析。     

ELECTRICAL STRUCTURE OF THE 2017 MS7.0 JIUZHAIGOU EARTHQUAKE REGION AND THE EASTERN TERMINUS OF THE EAST KUNLUN FAULT

The East Kunlun Fault is a giant fault in northern Tibetan, extending eastward and a boundary between the Songpan-Ganzi block and the West Qinling orogenic zone. The East Kunlun Fault branches out into a horsetail structure which is formed by several branch faults. The 2017 Jiuzhaigou M_S7.0 earthquake occurred in the horsetail structure of the East Kunlun Fault and caused huge casualties. As one of several major faults that regulate the expansion of the Tibetan plateau, the complexity of the deep extension geometry of the East Kunlun Fault has also attracted a large number of geophysical exploration studies in this area, but only a few are across the Jiuzhaigou earthquake region. Changes in pressure or slip caused by the fluid can cause changes in fault activity. The presence of fluid can cause the conductivity of the rock mass inside the fault zone to increase significantly. MT method is the most sensitive geophysical method to reflect the conductivity of the rock mass. Thus MT is often used to study the segmented structure of active fault zones. In recent years MT exploration has been carried out in several earthquake regions and the results suggest that the location of main shock and aftershocks are controlled by the resistivity structure. In order to study the deep extension characteristics of the East Kunlun Fault and the distribution of the medium properties within the fault zone, we carried out a MT exploration study across the Tazang section of the East Kunlun Fault in 2016. The profile in this study crosses the Jiuzhaigou earthquake region. Other two MT profiles that cross the Maqu section of East Kunlun Fault performed by previous researches are also collected. Phase tensor decomposition is used in this paper to analyze the dimensionality and the change in resistivity with depth. The structure of Songpan-Ganzi block is simple from deep to shallow. The structure of West Qinlin orogenic zone is complex in the east and simple in the west. The structure near the East Kunlun Fault is complex. We use 3D inversion to image the three MT profiles and obtained 3D electrical structure along three profiles. The root-mean-square misfit of inversions is 2.60 and 2.70. Our results reveal that in the tightened northwest part of the horsetail structure, the East Kunlun Fault, the Bailongjiang Fault, and the Guanggaishan-Dieshan Fault are electrical boundaries that dip to the southwest. The three faults combine in the mid-lower crust to form a "flower structure" that expands from south to north. In the southeastward spreading part of the horsetail structure, the north section of the Huya Fault is an electrical boundary that extends deep. The Tazang Fault has obvious smaller scale than the Huya Fault. The Minjiang Fault is an electrical boundary in the upper crust. The Huya Fault and the Tazang Fault form a one-side flower structure. The Bailongjiang and the Guanggaishan-Dieshan Fault form a "flower structure" that expands from south to north too. The two "flower structures" combine in the high conductivity layer of mid-lower crust. In Songpan-Ganzi block, there is a three-layer structure where the second layer is a high conductivity layer. In the West Qinling orogenic zone, there is a similar structure with the Songpan-Ganzi block, but the high conductivity layer in the West Qinling orogenic zone is shallower than the high conductivity layer in the Songpan-Ganzi block. The hypocenter of 2017 M_S7.0 Jiuzhaigou earthquake is between the high and low resistivity bodies at the shallow northeastern boundary of the high conductivity layer. The low resistivity body is prone to move and deform. The high resistivity body blocked the movement of low resistivity body. Such a structure and the movement mode cause the uplift near the East Kunlun Fault. The electrical structure and rheological structure of Jiuzhaigou earthquake region suggest that the focal depth of the earthquake is less than 11km. The Huya Fault extends deeper than the Tazang Fault. The seismogenic fault of the 2017 Jiuzhaigou earthquake is the Huya Fault. The high conductivity layer is deep in the southwest and shallow in the northeast, which indicates that the northeast movement of Tibetan plateau is the cause of the 2017 Jiuzhaigou earthquake.     

丽江7.0级大震发震机制新见

通过对丽江地区构造格架和丽江大震的震后调查,对丽江地震的发震环境进行了系统分析,认为丽江地震是在主压应力为近NS向区域应力场作用下,NE向丽江小金河断裂左旋错动和NW向中甸－永胜断裂右旋错动,从而导致巨甸－九五海三角形断块东部近尖端部位出现局部拉张环境,最终导致近NS向西倾的玉龙雪山东麓断层北端撕裂而发震。